How to Upgrade Your Clubs With Custom Ferrules / Step by Step 

A trick that I learned somewhere for ferrules that were tight to slide on was to let them warm up in hot water before installing. Has worked like a charm for me ever since learning it!

I’ve always love your videos but this one and the super taper grip have been two of the best!!

quick easy and well explained tutorial. Just like we love! Thanks dude!

This is good because how many times have I said, ".....next time" to pimping out my irons when I could have just done it myself. Handing your clubs over to a builder to ask him to go through all that work just to swap a ferrule is almost embarrassing.

Thanks for the help this morning. I’ll have to get one of the hot boxes.

Very interesting and informative. Keep the info coming.

Thanks for the detailed demonstration I'm going to do this! I've replaced shaft adapters on my driver/woods, I can't wait to spruce up my irons!

Awesome awesome awesome!!! Thanks AJ!!!

very informative; one day I hope I have the space and budget to start club building

Great job, was just doing this.

Nice tutorial.... I was surprised you didn't remove all of the old epoxy from the shaft but I'm an over achiever : )

I did this with a set of dci 962 with BB&F black and orange ferrules to go with a Titleist San Francisco Giants walking bag I found. Looks great!! What brand of epoxy is that?

Thanks for the education! Your videos are always very informative. Do you epoxy tip weights in shaft (so they don’t get stuck in hosel) or do you just set them inside the shaft?

Good job. I probably would have removed all the old, left over epoxy inside the shaft tip

Actually I have a related question AJ. I have a right handed cobra driver which has a shaft with a left handed adapter (I swapped it for the original shaft). I leave the left handed shaft set on STD but my question is can the LH adapter be removed and replaced with a RH adapter? It’s a Hzrds composite shaft. I am concerned that if I heated up the adapter to break the bond that the heat could affect the shaft tip. Thanks for any advice.

I was going to do this on my MG4 wedges but they have a collard ferrule. Do I have to do anything differently with that good repair or same process ?

Hey AJ - greetings from down the street in ATL. I'm sure you've covered this somewhere, but I'm having trouble finding it in one of your videos: can you share your recommendations for brand/type of epoxy or point me to one of your videos where you cover this topic? My sense is that 3m DP8410NS is the gold standard, but at $40/tube + a $40 gun, it seems like a lot for a home hobbyist. Thanks!

As it’s not a major manufacturer, but is Edel sms and sms pro pretty easy to work with?

Hey AJ, any tips for making sure that the head goes back on with proper alignment to the grip?

How does the finish hold up on a matte club like p770’s? When to have to sand down the ferrule?

I’ve used Gorilla glue epoxy in my past golf club stuff. Do you recommend any particular epoxy?

What about Wilson? Are they difficult or easier?

I know it’s purely a domestic thing but I would like to buy new irons and have custom ferrules done is it a detriment for a brand new set ?

what makes callaway more difficult to do?

Why do you say some brands are more difficult to work with? I've taken apart my Callaway Apex Pro's and didn't have any issues.

Great video but it’s poor club building practice to not remove the epoxy entirely from the inside of the shaft. It would have been just as easy to heat the tip and bore out all the epoxy with a slightly larger drill bit.

Invent a 2-pc ferrule which snaps around shaft

Sorry AJ, but this is one thing I disagree with you. I think these BB&F ferrules (which are way too expensive in the first place) are not what I think look good on a nice golf club. Gawdy is not what I want to look at when addressing the ball. Maybe a better word would be distracting. Maybe some people like this. It just ain't my cup of tea.

from [boss] to [clown]

For the gay golfer...