How to Use a Speed Square Part 1

Подписаться 223 тыс.

Просмотров 34 тыс.

50% 1

This is part 1 of a 2 part series on how to use a speed square. For many of us in the trades, this may be way too basic. We we all start with zero knowledge or near zero and we grow from there. So we'll start with an overview of the square itself and then we'll go from there. I want to thank @AshleyHarwood for the idea to go back to basics. I highly recommend following Ashely, she's a wonderful teach and woodworker.
I like to keep a couple of 12" squares for marking larger material and then in my tool bags, I carry the 7" Martinez Titanium square. This is 100% a luxury tool for me and I love this square.
Oh and another takeaway, if you use a drone for commercial work, you need to be part107 certified. Commercial work includes social media like RU-vid if you plan to make an income off of that. I watched a video about this last May and then purchased the Part 107 Course sso.teachable.com/secure/2458... I studied and learned for 1 month and then took my test. I scored a 95%, which is a testament to how good Greg and the crew over there teach. That link will save you $100 off the course and support this channel.
www.jlconline.com/how-to/fram...
Instagram / awesomeframers
website www.awesomeframers.com/blog
/ awesomeframers
Company pioneerbuildersonline.com/
/ pioneerbuildersinc
ISOtunes Bluetooth Hearing Protection - bit.ly/Timmy10 (10% off code: Timmy10)
AwesomeFramers hat or anything Truewerk 15% off (use Timmy 15 if the link doesn't show the discount.
truewerk.com/collections/work...
Check out AwesomeFramers Logo! tspr.ng/c/new-awesomeframers-...
badgertoolbelts.com
martineztools.com/
www.swansontoolco.com/product...
jackasssawhorse.com/
www.pica-marker.com/en/pen/pi...
diablotools.com/
www.calculated.com/mobile/prd...
#building #construction #framing

Опубликовано:

20 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@joep8520 2 года назад

Thank you very much Tim! These sorts of videos are incredibly useful, and I don't think there can be too many of them on RU-vid. Everyone learns differently and everyone explains differently, so it is awesome to have the different perspectives. Looking forward to part 2! Thank you for including the outtakes at the end, really enjoyed that!

@hisnhers6867 2 года назад

We are all so blessed for having 2 videos this week

@christianwood3774 Год назад

You would make an awesome teacher lol the outtakes were funny because you did a good job critiquing yourself too haha

@A.T.Sickzer Год назад

Love your channel. ❤️👌from a german carpenter

@carlustownsend7588 2 года назад

Good to know someone out would teach people how to used a tool. Great going.

@kirilllebedev706 2 года назад

you are a talented teacher! please keep these coming.

@allthingsconsidered3211 2 года назад

Such a good video. Not many out there

@pauljarrell8162 Год назад

I can’t explain how much I appreciate your Channel. I’d love to just soak in knowledge from you about all of this. Keep the channel going this is really great

@T.E.P.. 2 года назад

WOW ... this is more than just Speed Square. Love when u guys do these big ones. Hope your week is starting off great

@christianmore3469 9 месяцев назад

Super helpful, love the information! Thank you so much!

@michaelfahim5878 Год назад

Thanks so much for passing on your knowledge, a true legend.

@Kentreyal12 Год назад

hey man I'm in carpentry tec school in Hawaii man your videos are awesomeeee i want to be a framer as well its my dream job ahaha

@alejandropena5658 2 года назад

Man this is exactly the video I’ve always tried to look for when I first bought a speed square because every other video will tell you “yeah you can mark square and commens and here’s your degrees” but that’s it

@ryanluedeker2642 2 года назад

Excellent video, I enjoy this content!

@royordway9157 Год назад

You said when you started there weren't scribe marks, when I started there weren't speed squares that I ever saw. We used a framing square, a combo square and some used a try square. It wasn't until the late 80 or early 90s that I used a triangle square. You can teach an old dog new tricks and this and I'm sure pt. 2 will teach this old dog some new tricks. I started butchering wood in 1975 full time and I am still doing it when the knees don't hurt too bad.

@stickupcity1 2 года назад

Thank you for sharing your knowledge keep it coming just starting out as a rough framer...hard to find good people that genuinely wanna help...thank you

@carlnardo 2 года назад

Stuff like this always makes me look back and rethink the times i said to my old math teacher that i would not use this in everyday life. Man was I an idiot.

@mikeycarpenter117 2 года назад

I got one for you.....all through school I hated math, guess what, I chose a career that deals strictly with math.....go figure 😀

@carlnardo 2 года назад

@@mikeycarpenter117 yeup im in the same boat. All of a sudden pythagorean theorem and rise over run makes sense.

@TrimTab87 2 года назад

My wood shop teacher was mr. Wood too!

@AwesomeFramers 2 года назад

it must be a requirement

@Twinflames2021 Год назад

Curious where you went to school. My jr high woodshop teacher was also a Mr. wood. Loved making knives

@zephyr1408 2 года назад

Thanks Tim really appreciate you taking the time! I am a finish guy and use some of that for stairs & yes I beat up those 32nd on cabinets ! Say inset doors; custom fitting drawers ! I carry a 6” rule in my leathers (bags ) and it’s my 2nd one in the last 5 yrs! It has 32/64th markings? Sorry ; framers work in the range of 6” to 6’ and it’s good to go! Kidding your a great carpenter and a massive credit to the trade! Thanks again buddy! Jim Duncan Kings Table Custom Finish Carpentry (Located in the good half of California) 😳

@AwesomeFramers 2 года назад

Hey Jim, I like to throw comments out there like that one just to tease the finish carps. Thanks for the kind words 🙏🙏

@drew5334 2 года назад

The outtakes are PRICELESS hahahaha

@georgeking5746 2 года назад

Thanks Tim, this has been very informative for a novice like me,. Have had a Swanson since I was 18, I'm not a framer but i like to build things for myself whenever possible. Always have wondered how to fully use my speed square. Looking forward to part 2.

@bravo5997 Год назад

In addition, we do not use such speed squares, although there are also metric versions. With us, the roof pitch is given in degrees, and the average is 22 degrees.

@AwesomeFramers Год назад

In the US and Canada, roof slope is labeled in some many inches of rise per 12" of run. I believe this comes from the invention of the rafter square.

@rossfudd256 2 года назад

Tim next time you show marking, you might consider using a Pica pen so it shows up better. The line will be about the same thickness but the Black ink might show better on camera. Just a thought, Great video though.

@AwesomeFramers 2 года назад

Good suggestion. I'll order some, unfortunately part 2 was filmed dame time as this

@rossfudd256 2 года назад

@@AwesomeFramers Kinda figured, but you'll do more.

@shawnupdegraff8138 2 года назад

Love the outtakes!! Helps us see how real it really is!! Thanks for putting it all out there for us Tim!

@contax50mm Год назад

Love the square tips! Is the smaller angle 30 though. It just cross references to the opposite mark on the square?

@starrjus 2 года назад

The outtakes are great! Shows just how difficult talking to the camera can be.

@ABZD019 Год назад

I know the common measurements are what we most often use, but I started using degrees and I refuse to go back. It's so much easier to set the saw to the degree than it is to try and find 18.4 for a 4/12 pitch. Especially if everything is vaulted and you're cutting rake angles; unless you have a separate saw you can keep at the rafter degree it can be easy to be off a bit trying to get back to the roof pitch once you're onto interior framing. At least for me.

@PabloEskimofo 2 года назад

Thanks for the video, looking forward to part 2! As for using your speed square to find pitch on rafters, do you ever find the need to use a framing square, or does this kinda eliminate the need for using one? Thanks!

@AwesomeFramers 2 года назад

I honestly never use a framing square. I do a lot with my calculator and then just use my 12" speed square.

@ABZD019 Год назад

I've found the L shape of a framing square to be awkward to put somewhere that won't just about immediately fall off. I can balance a 12" speed square on a 2x4 and it'll stay for days* * days being the unit of measurement between me laying it down and bumping it with some extremity

@drew5334 2 года назад

I didn't realize Swanson had finally come out with a speed square with 1/8" rip indentations. I spent $170 on the Martinez several months ago basically just for that... Do I feel like an idiot?.........Yes. Yes I do.

@darksahde 2 года назад

Ungodly expensive is in understatement 🤣

@scottaddison8071 3 месяца назад

👍

@lewismiller9281 2 года назад

I love my people. WP

@DrewDiaz 2 года назад

Just now realized how old my Swanson is

@DrewDiaz Год назад

Of course I was a piece worker framer before there were speed squares and I’ve been behind the computer for 33 yrs. But I do keep a couple of 28 oz plumb waffle head hammers around in case I want to feel old swinging one. I fired up the Senco last month to build a shed & my guy laughed at how heavy it is.

@RamboReviver 2 года назад

If I don't know the angle of a roof I'm working on, what would be the best way to find that angle?

@AwesomeFramers 2 года назад

One way is to put the square on a rafter tail with a level on top of the square.

@sundog8772 2 года назад

There are apps for this as well where you literally place your phone in the roof and it will find your angle

@adammacer 2 года назад

Tims given you the answer already but it's not very clear. Position the square against the side of the rafter so the heel is up and the 90º side is more or less vertical, with the pivot resting on top of the rafter . Place a short level on top of the heel then rotate the square until the level shows level. Now you can read off the slope from the common rafter scale on the square

@user-pn3gh6qi2t Год назад

Я поражён. Вы строите очень технологичные сараи.

@galvanizedgnome 2 года назад

Thanks for not doing jokes

@jonathansands2917 Год назад

Plans to make SAWHORSES ‼️

@AwesomeFramers Год назад

Www.jackasssawhorse.com

@adamr1637 2 года назад

Please put links for tools

@AwesomeFramers 2 года назад

Which ones? Did you check the description? I thought I had them all.

@goodmanmw Год назад

Good stuff, a sharpie might be better next time for the viewer

@ABZD019 Год назад

Lesser known used: Cut your sandwiches in half Spread condiments Toothpick Cut through Amazon tape Ramp for your finger skateboard Cheese slicer Pimple popper

@CybekCusal Год назад

12:54 so nobody noticed he mixed up his angles? You got them backwards buddy.

@AwesomeFramers Год назад

actually no I didn't. Remember that a speed square starts from 90, whereas a protractor starts from 0. So that's what I was labeling

@CybekCusal Год назад

@@AwesomeFramers yes you did. You marked the small angle as 60 and the big one as 30. Don't assume all your viewers are stupid.

@AwesomeFramers Год назад

@@CybekCusal first of all, nothing that I said indicates that I think you or anyone else is stupid. 2nd, if you put your speed square on top of a rafter where it meets the ridge, it'll show the 30 degrees. In reality though a triangle with a 12" run and a 7" rise, will show 30 at the level cut according to a protractor. Also if you use trig, it'll show you that too, for example check here www.cuemath.com/tangent-formulas/

@NikosDIY Год назад

I always crosscut without a square. My cuts are never square. Will I ever use a square to square my cuts ? No!

@Dithrandir 2 года назад

Content starts at 3:30

@Chrissers2010 2 года назад

1:34 The Johnson is HUGE.

@Kendrick_trucker Год назад

Jack azz saw horses 🤣

@nerfdano1356 2 года назад

Obviously that's a triangle

@yangwang5669 6 месяцев назад

13:18 this math is wrong. The lower left corner should be 60 degrees. The top corner is 30

@adammacer 2 года назад

Gotta say, I think saying "I never do that", without clearly qualifying exactly why and at that moment, is really poor teaching - I'm a pro carpenter and I was baffled by that comment. The way you said it suggested it was bad practice. The ability to free-cut an accurate 90º is something that comes with time and experience and is not something I'd 'recommend' to beginners and amateurs, which this video is clearly aimed at. Apart from that, love the channel still :o)

@AwesomeFramers 2 года назад

I appreciate your thought. I definitely didn't mean it to come across that way, just that I don't actually do it that way.

@willybrubaker3589 2 года назад

@@AwesomeFramers Tim, I am old enough that I am not working as much on learning, just not forgetting what I know. I watch your videos specifically to help me be a better teacher. Keep up the good work, really appreciate the effort.