Тёмный
No video :(

How to Use a Wood Jointer I Budget Jointer Basics for Beginners 

Casual DIY
Подписаться 62 тыс.
Просмотров 7 тыс.
50% 1

How to Use a Wood Jointer I Budget Jointer Basics for Beginners
In this video I will be covering some basics about a jointer. Its the first step in transforming a rough sawn timber to a ready to use board.
Titan Jointer video - • Reviewing the Titan Pl...
Titan Jointer fence upgrade video - • Titan Jointer | Planer...
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #woodjointer
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Опубликовано:

 

6 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@CasualDIY
@CasualDIY 2 года назад
Check out my other video on how to use a Thickness Planer, which is a second step in the process of transforming a rough sawn lumber to ready to use boards - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-InldMcREITw.html
@mickypful
@mickypful 3 месяца назад
Many , many thanks for this video. Just bought one in a garage sale and didn't even know what it was for. 😊
@CasualDIY
@CasualDIY 3 месяца назад
Thank you for watching 👍
@geraldmatthews6244
@geraldmatthews6244 2 года назад
Well done Thomasz, another great tutorial. Your always adding to my knowledge base, I'm most grateful.
@CasualDIY
@CasualDIY 2 года назад
Thank you for your kind words 👍😁
@idlersdream826
@idlersdream826 2 года назад
Great video & good tips, this is one tool I don’t yet have. Will check out the thicknesser video later 👍.
@CasualDIY
@CasualDIY 2 года назад
Thank you for watching 👍
@freddyedwards67
@freddyedwards67 2 года назад
Thanks for another great video. I got the same machine last week. Yet to use it. So an excellent tutorial for me. Cheers
@CasualDIY
@CasualDIY 2 года назад
Thank you for watching 👍
@mickmoyes7940
@mickmoyes7940 2 года назад
well made informative video Tomasz
@CasualDIY
@CasualDIY 2 года назад
Thank you kindly 👍
@MCsCreations
@MCsCreations 2 года назад
Really excellent tips, Tomasz! Thanks! 😃 I bought a 12" thicknesser and planer, but I'm still a bit scared to use it. 😂 I'm going to look for someone around who could help me with it. Anyway, stay safe there with your family! 🖖😊
@CasualDIY
@CasualDIY 2 года назад
Thank you. No need to be scared of it, have respect for it and you will be just fine. Shallow passes, use push blocks and it will be fine
@johnmusgrave3179
@johnmusgrave3179 2 года назад
Nice clear tutorial. Thank you!
@CasualDIY
@CasualDIY 2 года назад
Thank you for watching
@paulhowell2235
@paulhowell2235 2 года назад
Great Video. Just got the same jointer today so your videos are very handy 👌
@CasualDIY
@CasualDIY 2 года назад
Thanks 👍
@steveparkes1266
@steveparkes1266 2 года назад
Great video and well timed Tomaz I’m picking the same machine up Friday from Screwfix 😃 thanks for sharing 👍
@CasualDIY
@CasualDIY 2 года назад
Hehe have fun with it and thank you for watching 👍
@anthonymellor174
@anthonymellor174 2 года назад
Here’s a tip for the fence A B method ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-C9scpxNqb40.html
@tommym936
@tommym936 2 года назад
I need to use mine, its been kicking about in the way in the workshop for a year
@CasualDIY
@CasualDIY 2 года назад
Hehe I got few tool like that 😁
@johnriordan288
@johnriordan288 2 года назад
Hi Thomas great video as always I have one with a couple of years but never used it afraid of it but will have to use it soon. The stand you made for it do you have a video on it I would like to make one of them ? Thanks
@CasualDIY
@CasualDIY 2 года назад
Thank you, yes got a video here is the link to it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OHYrdtfWGJ8.html
@TheBluealan2000
@TheBluealan2000 2 года назад
Another great video mate, thank you. I think it is time for me to invest in a similar tool
@CasualDIY
@CasualDIY 2 года назад
Thank you. This is a very entry tool but the next one up is so much more expensive that it's just not feasible for most DIYers to get. But you can still get done decent results with it👍
@katabrontes
@katabrontes 2 года назад
Hi Tomasz, Helpful introduction. I like your suggestion to retract the guard a bit so you can move the push blocks evenly across the cutters. I find it quite awkward doing this with guards across the whole width of the blade so you need to lift the leading block over the guard at the start of the cut. Looking at your ruler at the begging it looks as if your infeed table is sloping slightly down at the end furthest from the cutters. Does this matter? I hope the gas keeps coming! Mike
@CasualDIY
@CasualDIY 2 года назад
I think it was just the camera. But even if, you are putting pressure on the outfeed table so it should not matter that much. Well according to our government we got gas 🤔
@corrosive72
@corrosive72 2 года назад
Does grain direction matter what why you run it threw??
@CasualDIY
@CasualDIY 2 года назад
It's best to run it with the grain as on some occasions if you run it against the grain you may get some tear out in fibers
@johnallport-yv8hp
@johnallport-yv8hp Год назад
Hi I've just bought a thicknesser but has no book what I wanted to know is what is the purpose of the handle on top for
@CasualDIY
@CasualDIY Год назад
Which handle? Did you get this Titan? There is one on the side that is to lock the infeed table
@johnallport-yv8hp
@johnallport-yv8hp Год назад
Hi can anyone help me with a problem I have bought a thicknesser planer and there are two handles I know one is for the depth of cut but what is the one on top for ?
@johnallport-yv8hp
@johnallport-yv8hp Год назад
@@CasualDIY hi in your video on the top of your thicknesser you have a red handle I have the same what is the handle for
@CasualDIY
@CasualDIY Год назад
@@johnallport-yv8hp on this Titan or the Metabo? Titan got only yellow parts
@johnallport-yv8hp
@johnallport-yv8hp Год назад
@@CasualDIY thanks for your reply I have a thicknesser planer it's called Sip it has the thickness handle on the side and in the top section it has leaver that moves back and foward I don't know what it's for ?
@richardd9867
@richardd9867 4 месяца назад
Hi. When I push the wood along the jointer blades the front end and back end of the wood is cut by the jointer blades but the center of the wood does not touch the blades. Can you advise how to fix this issue please?
@CasualDIY
@CasualDIY 4 месяца назад
Silly but obvious question, is the board not bowed? If the machine is cutting then its more of a technique used or the board itself is bowed, twisted etc.
@richardd9867
@richardd9867 4 месяца назад
Thanks for the fast reply I really appreciate it. No the board is fine just a little rough. I measured the board width and it's the same measurement along the whole board.
@richardd9867
@richardd9867 4 месяца назад
I have a feeling the outfeed table is not level and I don't think that can be adjusted, would that cause the issue?
@CasualDIY
@CasualDIY 4 месяца назад
@@richardd9867 well put a long level, get the infeed table up and see if it's is
@thomaspako
@thomaspako 2 года назад
New workshop?
@CasualDIY
@CasualDIY 2 года назад
Newish, been here just under 1 year 👍
Далее
Thickness Planer Basics | Woodworking for Beginners
11:15
Советы на всё лето 4 @postworkllc
00:23
Table Saw Basics I Table Saw for Beginners
21:36
Просмотров 7 тыс.
Why do they call it a jointer when it planes wood?
12:32
How to use a Jointer
11:27
Просмотров 121 тыс.
Masterclass: Perfect Jointer-Planer-Thicknesser Setup!
34:17
I Don't Get Why People Still Use These Joints
17:26
Просмотров 737 тыс.
Best 4 Router Bits For Beginners
10:59
Просмотров 33 тыс.
Hobby woodworkers need to hear this.
19:53
Просмотров 117 тыс.