HOW TO USE AIRBRUSH PRIMER

Подписаться 12 тыс.

Просмотров 22 тыс.

50% 1

BEST WAY TO USE AIRBRUSH PRIMER
Check out this short Video on how to get the BEST out of your airbrush by using Airbrush Primer from #vallejo
With any primer its best to let it dry for 24hr before painting on to get the great resistance for scratches and chipping.
If you would like to support the channel and like what we do consider backing us at
www.patreon.com/user?u=18288890
Check out our other awesome battle reports: ru-vid.com/show-UCOX9...
We also have a podcast so search us on your favourite podcast provider.
Thank you to our channel sponsors
Game Mat EU
DICE AND DECKS
Check them outChaos Knight Building Tips Watch before you build.
Check out this short Video on how to get the most out of your knights before you build.
If you would like to support the channel and like what we do consider backing us at
www.patreon.com/user?u=18288890
Check out our other awesome battle reports: ru-vid.com/show-UCOX9...
You can also find us every week on Twitch at 9:30pm
We also have a podcast so search us on your favourite podcast provider.
Thank you to our channel sponsors
Game Mat EU
DICE AND DECKS
Check them out
#airbrush
#airbrushprimer

Хобби

Опубликовано:

13 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@TwistedDice 3 года назад

I used 50/50 Vallejo Model Air Thinners to primmer I hope this video helps 😊

@Adam.Hughes 3 года назад

Can I ask, what pressure you have the compressor at? Is distance from the model a factor (except for obvious spider webbing)?

@TwistedDice 3 года назад

hey Adam I set my air compressor @20-24 psi and it dose depends on size and where on the the model I’m priming. Distance is normally between 4 to 6 inches away from the model I hope that helps 😊

@lonewolf9390 6 месяцев назад

Simplest explanation of how to use Vallejo primer that I've come across. 👍👍

@Velzhaed 4 года назад

Thanks for the video. Looking forward to the next.

@MorrowindES17 4 месяца назад

Thank you now i understand what i been doing wrong its thinners work like magic !! will try it for airbrush.

@Ugobro1 Год назад

Excellent, short sweet just what I was looking for. Thank you.

@TwistedDice Год назад

Thank you for watching 😊

@grailknightofenoch1263 4 года назад

I appreciate the effort for this video, but there is honestly a lot of stuff I wouldn't do or recommend, especially for beginners. Firstly I also use the vallejo primer and its consistensy is fine already, I mostly use 2 to 3 drops of extra thinner and that's totally fine, too much thinner will prevent the primer from drying in place and can let it flow into cracks, having a wash effect, you do not want that with primer. Secondly you filled your cup almost to the brim with primer, also something I wouldn't recommend, if you move the gun it can easily spill out or if it clogs up, you have to empty the entire cup to clean the gun, only fill the cup up half max. And thirdly, something I see people do often, but that is absolutely terrible for the gun is the backblow...don't do that to your gun, it will blow paint into the backarea of the gun and clog it up, paint doesn't belong there and that part is really difficult to clean, a couple of my friends ruined their guns with this.

@TwistedDice 4 года назад

Hey GrailKnight Yes beginners probably would not be a good idea if you have used a airbrush before. When using the primer I only fill the airbrush cup half way so I don't spill any over my models and it can be a real pain when it dose spill. Interesting about the blowback I've always used that way of mixing my paint and not had any problems with my brush as yet. Think iv's had my badger airbrush for about 4 years now if not longer and they have been really awesome to work with. Thank you so much for watching and taking the time to comment means a lot to us pal :) Darren

@grailknightofenoch1263 4 года назад

@@TwistedDice Thanks fot taking the critique, I hope it didn't come of too harshly, I generally enjoy your content and appreciate the production quality

@wilfredderksen 4 месяца назад

Thanks for the tip! I had some clogging before I saw the video. Don’t you have clogging still? One of the hard ways to get in my system is to keep the air flowing and only start/stop the paint. However in this ([articulat this?) video I hear you stopping the air immediately as well. I get a clog within a minute or so.

@MorrowindES17 4 месяца назад

questions dos it matter on what brand of thinner i see loads them cant decide on which one.

@andyfuller6975 4 года назад

How does this compare to the badger stynylrez stuff?

@TwistedDice 4 года назад

Good morning Andy I’ve not had the chance to use the badger yet but I can imagine it being exactly the same i’m reading the description from the website. Once we come off lock down I will buy a bottle to compare 😊 Thanks for watching buddy

@petesixteen 4 года назад

Where was the next video about preshading?

@cliffedward 2 года назад

What I find helps for mixing is a Coke bottle top. Just pour it into the cup and you're away.

@NyteStalker89 7 месяцев назад

Vallejo isn't pronounced Valle-joe. the jo sound in Spanish is ho. Pronunciation is Valleho.

@dirtysouth2821 3 года назад

What psi do you have your compressor set at?

@TwistedDice 3 года назад

Hi dirtysouth2821 I set my Compressor to 20/24 psi

@dirtysouth2821 3 года назад

Thank you for the info, I am a newbie to airbrushing so I am trying to get all the knowledge I can. Great video and thank you for your time to answer my question.

@TwistedDice 3 года назад

dirtysouth2821 your welcome buddy I do a live stream every Saturday night painting your always more than welcome to join in the chat and ask as many questions. Plus might have some tips 😊 Darren

@Anubis_920Models 5 месяцев назад

This is a old video so hopefully you see this... ive just started to use a airbrush.. been priming warhammer with grey and a little but of flow improvement but when priming it looks like its not sticking in one place and its pulling away from certain areas i have 20psi not sure what could be the issue

@matejcvik3673 5 дней назад

Could be the model is not washed properly?

@garrobond0017 4 года назад

Ancient Chinese technics, wear gloves, so you don't get paint on your hands. Can you recommend a good compressor for beginners, peace, stay safe and sound.

@TwistedDice 4 года назад

Rubber gloves are a good shout buddy and normally do wear them when airbrushing. the one I've got is Sparmax TC-620X Professional Mini Twin Piston Airbrush Compressor (2.5 Litre Air Tank)not cheap but out the many I've had its been the best so far. We are going to do a video very soon on compressor and what to look for.

@garrobond0017 4 года назад

Many thanks for your time, keep safe and sound.

@TwistedDice 4 года назад

@@garrobond0017 and you buddy stay safe :)

@dirtysouth2821 3 года назад

Tooty by No Name, is a decent compressor. Check it out on the the Spray Gunners website