that was great you did that without spilling a drop me my fingers would be black and the table i hope i can do it like you did will the printer accapt the cartridge after you put it back in my epson 2200 never works if i take a cartridge out and put a new one in again.
How do you refill the cartridges that have no holes on top? There's one hole on the bottom, opposite side where the ink comes out. Tried to refill it that way, and it was a mess. Any thoughts? Thanks a lot!
Hi my printer is epson Xp 4101, can i use other model of empty catridge to use it for my printer? For example use the model T193(for WF-2521 printer) or T1771(for XP102 printer) empty cartridge for my printer as I already converted it chipless
I notice that you mentioned the chip on the side of the cartridge, what happens when the page limit reaches zero on the chip? do we have to buy another one?
If your cartridge has a small hole right about the chip then that I believe is the page resetter, just take something small enough like a paper clip to push in and reset the page counter.
Hello I purchased refillable ink cartridges from eBay they worked great the first time I filled them but why are they not working on the second fill? I appreciate any help
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Pv6nPn_46WI.html this guy explains that you have to reset the chip on the print cartridge back to zero because apparently it records the amount of prints that are done.
Hey! I have an epson WF7210. I went to your website and it says you have AutoReset Ink Cartridges for Epson WF 7210 DTW. What is DTW? Will it work on my WF7210? IN USA.
Hi mate, unfortunately i didnt watch this video before i refilled my cartridges......my black said low, so me being a time saver....i refilled the other 3 also....the black one went up too 100 on the ink check , but now im stuck because the blue and red say Low ink, but they are full :/ do you have a reset chip thing for the Epson Workforce-7710?
You have refilled them to early, should only be refilled on 100% empty, to get them in sync refill them all now, when it says 100% empty refill that cart again regardless of how much ink it takes, then only refill in future when it says 100% empty
@@cityinkexpress-online no can I ask I done the same as you filled my black refillable cartridge when the printer said low on ink . Now my printer still saying low black Ink even though cartridge is full . Did you get yours sorted out .I did follow advice to take the cartridge out & refill it to 100% & put it back in but still saying low ink ?. Was wondering will the printer eventually say black empty n when I refill it then it will then sort itself out . Would be greatful if you can tell me how to sort itoutifyou got yours sorted thanks
I just check your store. I will like to purchase this cartridges. Before, I have a question. Is those cartridges work for Epson XP-440 228xl cartridges?
I got refillable cartridges, replacing the 405xl variant. The seller said to leave the coloured plugs off once I'd filled up the cartridges, surely that's not right?
@@cityinkexpress-online No they were from 24/7 ink on ebay. For a WF-3820. I've put the plugs back in the fill holes, no way you should leave them open.
@@cityinkexpress-online Thanks. They sent the right cartridges with the wrong instructions, they're fairly large cartridges holding 20ml of ink with a breather hole towards the back of the cartridge. These fo save you a fortune though I buy the inks for 10 pounds and it's something like 50 times cheaper than buying the official inks.
i have an XP-6100 will these work if the printers firmware has been updated as i found your listing on Ebay but doesn't state if they work or not with a printer firmware update?
Dear Sir: Do you have a product compatible with (T3651-T3654) because this is the Printer Cartridges series. or you have same product compatible with (T3651-T3654), Epson xp-332A
Hi i.v refilled my refillable cartridge when my Epson workforce 2750 said low on black . Now my printer keeps saying low on black ink ? And when I check ink level on the printer it's showing the cartridge low ink level ? How can I get the printer to say black is full ?. I know you say it is now out of sync . How do I remidy this ? Thanks is there anyway I can get the cartridge back in sync ? Or would it be better for me to just buy another black refillable cartridge ? Will that resolve the problem ?
Fill each colour to full now regardless of how much it takes, when the colour reports empty 100% empty fill to full again just that colour - you are then in sync - future refills only when 100% empty
@@cityinkexpress-online thanks so much for your time and consideration in helping me .but it is only the black cartridge that I made the mistake with . So if I take all the other cartridges out and top them up won't that send them cartridge's out of sync as well ?. Can I not just wait untill the printer tells me the black cartridge is empty then just fill that to 100% ?
Topped up the black refillable cartridge to 100% still saying low on ink ?. Will wait untill printer tells me black empty then refill it and hope printer resets itself then Thanks for your help. Can I ask will the printer eventually say black ink empty ? So I can top it up and get it back in sync ?
Hi there can you please tell me ? tell me if I can convert my original Epson XP 900 cartridges? if not where I can obtain the necessary cartridges for the Epson XP 900 cartridges ? do you have a web site ?
I bought this printer ru-vid.comUgkxciSwynMJ7PnUvvx11rewiu-yFBkZTl53 to replace an aging HP printer. It is just used for casual home printing so I don't need anything more. Installation went easily though the HP Smart Printing doesn't work well with our laptops - having to select the actual device. Will have to see how the HP Instant Ink program works out. Plus haven't been able to set up printing from smartphone yet - either direct or WiFi