How to use Joints in Autodesk Fusion | Day 23 of Learn Fusion 360 in 30 Days - 2023 EDITION

Подписаться 262 тыс.

Просмотров 16 тыс.

50% 1

Learn how to assemble designs in Autodesk Fusion. We'll discuss using the As-Built Joint command to create joints and motion with designs that are built in place, including imported designs. This demo uses the 06_tripod demo file included with your Autodesk Fusion install.
New to Fusion 360? This is a brand new 2023 version of Day #23 of "Learn Fusion 360 in 30 Days for Complete Beginners" - the most popular Fusion 360 course online!
Resource Page ➞ productdesignonline.com/d23
Full course on RU-vid: bit.ly/30daysUpdated
CHECKLIST FOR BEGINNERS ➞ bit.ly/f360checklist
Learn faster with Kevin's Fusion 360 Masterclass at ProductDesignOnline.com/courses
SUPPORT KEVIN'S TUTORIALS
Donate $10 ➞ www.paypal.com/paypalme/produ...
Patreon ➞ / productdesignonline
Single Donation ➞ www.buymeacoffee.com/pdo
TIMESTAMPS
00:00 - Intro to Joints and Assemblies in Autodesk Fusion
00:15 - Open and Save the Tripod Demo file from the Data Panel
01:25 - Mates equivalent in Autodesk Fusion 360
01:43 - Common Assembly approaches in Autodesk Fusion
03:40 - Joints vs As-Built Joints in Autodesk Fusion
04:21 - Creating the first As-Built Joint on the tripod leg
05:36 - Defining Joint Motion Limits in Autodesk Fusion
06:45 - Joints with copied parts in Autodesk Fusion
08:06 - Adding the remaining Joints to the tripod legs and stand
10:44 - Creating a Ball Joint in Autodesk Fusion 360
11:23 - Testing your Joint motion in Autodesk Fusion
-
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
-
#Fusion360 #ProductDesignOnline #fusion #cad #autodesk

Опубликовано:

25 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 40

@ProductDesignOnline 4 месяца назад

Demo File Instructions ➞ productdesignonline.com/d23 Full course on RU-vid ➞ bit.ly/30daysUpdated

@mrfive427 4 месяца назад

Dude ur channel is worth a million

@ProductDesignOnline 4 месяца назад

@@mrfive427 appreciate you and hope you have a wonderful day 😃

@blanco18 Месяц назад

If you're looking for "Ground" at 3:03 , it appears to have been renamed to "Pin", do NOT select "Ground to Parent"

@chir0pter 16 дней назад

Thank you

@bragadeesvaran2668 4 дня назад

Does the pin option work? I'm still able to move the red stand even after pinning

@blanco18 3 дня назад

@@bragadeesvaran2668 it worked for me. I’m learning just like you. You can ask the creator for details.

@cadbuildflyrc3784 4 месяца назад

I keep learning new things in Fusion 360 from your channel. I even go back and watch the learn Fusion 360 in 30 days series. A lot of things you teach go directly with modeling Airplanes.

@urbanspoken Месяц назад

Thank you 🙏 Now "Ground" has been renamed to "Pin" 🙈

@Grazfather 4 месяца назад

Whoa! I reached the end. Looking forward to more. These are top notch!

@undahdaskin Месяц назад

Hi, first of all i wish to thank you for all these videos that help people like me to understand this software, At 8:55 when you click on the Flag/handles with the mouse to adjust the limits of the joint, I can not get that to happen, is that only available in the paid version, i am still learning Fusion 360 and only have the Free version to use as a learning aid.

@HighExplosiveOP 4 месяца назад

HE IS BACK 🎉

@selfworthy 4 месяца назад

Thank you for posting your tutorials, they are really helpful!

@filetdelumiere5037 4 месяца назад

Great video as usual. Thanks :) I am waiting for the next one...

@arprestia 19 дней назад

If you're unable to click and drag the components at 0:53, open the select menu and make sure "Component Drag" is checked. For some reason, this was disabled for me.

@meyerbenr 2 месяца назад

I GOT THE BALL JOINT WORKING CORRECTLY!!! The Section Analysis tool helped me identify conflicts that prevented Contact Sets from working. I shrank the ball by 0.1mm, cut the right side of the mount path in the red stand 0.7mm, cut a new tangent arc through the bottom of the path, and chamfered the path edges 1mm. After that the contact set between the camera mount and red stand are working perfect! :D

@ProductDesignOnline 2 месяца назад

Well done. Great job sticking with it!! 💪

@igorodobetsky3769 3 месяца назад

Hi there! I've got a problem with joints. For example, try to make a body and name it Body1 or whatever you like. You can't move it till use "move" function and it's ok. After that make a component from the Body1 and then you can move it free just clicking on it the left mouse button and it's ok too. Next use "Ground" function with component and it will freeze his position. Now make the second clean project and insert your component Bosy1 in this new project using function "Insert into Current Design". You still can move it free just clicking mouse on Body1. And here we are close to something interesting. Use the "Ground" function for Body1 here to freeze it....... I CAN still move it after all ..... WTF ???!!!!

@SweetestWalrus 4 месяца назад

First let's gooo

@adminadmin8992 4 месяца назад

Additional task. I set pins to rigid and wing screw to revolute.

@mikawilliamson2863 2 месяца назад

Im struggling with the contact sets for the ball joint, i created a contact set for stand2:1 and stand camera:1 after creating a as-built joint

@mattshields8349 Месяц назад

The flag icons do not appear for me when attempting to set the Min/Max values in the "As-Built Joint" tool. Any suggestions?

@jonnysegway7866 Месяц назад

Make sure when you select the 'Snap' you highlight the interface between the two component and not the outer edge of the chamfer

@Yoggoth 4 месяца назад

It is better to make multiple components with rigid joints or one component with multiple bodies?

@ProductDesignOnline 4 месяца назад

Really depends on the design and your objective. My personal preference is to have multiple components with Rigid joints as it's more future proof if you do need to change joints/position/motion in the future.

@HenkJanBaard Месяц назад

First of, I love this series, so thanks for this! I have Fusion 2.0.19207 and the option 'Ground' is replaced by 'Ground to Parent'. Also there is an option called 'Pin' that wasn't there before. I'm not sure but I think, were you talk about 'Ground', I have to use 'Pin' now?

@maxfulmer3193 Месяц назад

Same for me

@jonnysegway7866 Месяц назад

Same, but when I use 'Ground to Parent' I can still drag this component, 'Pin' seems to do the trick

@broj 12 дней назад

Pin replaced ground

@erikwhitman 2 месяца назад

Do you have any videos on ball joints that have a threaded socket and collar?

@ProductDesignOnline 2 месяца назад

No videos on that currently. 😃

@scumdogoftheuniverse 4 месяца назад

Link to the selection set video to limit the motion of the gimbal ball-joint?

@ProductDesignOnline 4 месяца назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UkGdrTyAaBg.htmlsi=ZOwvDddZehrKbWuq

@jakhan3067 19 дней назад

Greetings - unable to d/l file to engage with training session. What is link to d/l this file. Thank You.

@ProductDesignOnline 19 дней назад

This specific file is in your Data Panel already. Open the Data Panel Scroll down and double-click on the ‘Basic Training‘ section which is included with the Autodesk Fusion download. Find and double-click on the ‘06 - Assemblies‘ folder. Find and double-click on the ‘06_tripod‘ file. Demo files are read-only by default. Select File > Save As, and save the design.

@jakhan3067 18 дней назад

Unable to see it - I have (not for commercial use) also limitations of 10 saves...please advise?@@ProductDesignOnline

@HighExplosiveOP 4 месяца назад

Can you do a pilot seat , oxygen canister or ejection mechanism?

@Ridingrules10000 2 месяца назад

Anybody else having trouble with the revolute joint on the last leg? The limits are tied to each other somehow and I can't set them where I want them. As if there's another constraint or a defined parameter that I don't see. *Edit*...Figured out how to get past it, but still not sure why that was the case. I had to change the z-axis to a different circle center.

@ProductDesignOnline Месяц назад

Thanks for watching 😎