How to Use The Angle Grinder | Stone Carving Tutorial 

Your videos have been so helpful. Thankyou so much!

A very comprehensive set of safety measures. The best I've come across. Thank you very much!

This artist is an excellent teacher. I'm learning a lot and will scour his other videos before I start cutting and carving in stone. Thank you Athar for sharing this knowledge and experience. Also, very curious where you get your marble (or any other stone) that is large enough to make portrait busts with? If you are living near Venice, it is obvious where, but in the US, I have yet to find any marble suppliers and only one soft stone supplier, just north of me near Vancouver. Hopefully I can acquire some marble someday to push my work further. Thanks.

Thank you very much for so carefully explaining all the safety measures, appreciated.

Everybody can use a refresher on safety-you covered very well-thank you-from a beginner!

This was a really really good video! From safety procedures to technique and everything else that goes along with it! Gave this one a special tag so I can go back and watch it again! Many thanks!

Thank you so much. I have been looking for a video that goes in to detail and especially about safety with the angle grinder. I am new to using one, and I have, but I still am wary of it and I need to get to work. So thank you once again and yes I would like to know how to use, and set up the other discs you showed. Stevie

I just bought a 9” 15amp, 6400rpm monster to mostly cut metal and was looking for safety and explanation videos. This video is awesome, thanks bro, just subbed!!

Excellent communication skills and essential safety instructions!

Very thorough explanations, thank you! Towards the end of the video you asked for comments if folks are interested in an additional video about the rest of the discs. Such a video would be great to check out esp with your approach to detail and attention to safety. Thank you

Thanks for so professional video. As a beginner I feel more safe now 🙏

This very sensible and well thought out advice. Thank you.

You are exemplary in the sculptors mentors......

Brilliant succinct advice!!! Do regret that I live so far from all my brilliant U Tube instructors! But do appreciate what the service offers! R N Scott. Kwazulu Natal

Thank you very much. I learned a lot from your videos. I hope you will provide us with more in the different methods of direct sculpture.and in using pneumatic hammers .

I’m thinking of getting an angle grinder to cut some paving stones for a patio, but a little anxious about safety. This was a really helpful and reassuring video - thanks!

Very thorough explanation about safety. Thank you!

Very useful safety information Athar on how to use an angle grinder. Grateful for the video. But in the spirit of Oliver twist, can you please make videos on how to use the other discs, such as sanding and polishing?

great video...safety first a great principle...i greatly appreciate your wisdom..thanks..

Nice Mate, I Want to star cutting and carving stone, I was afraid a bit with the grainders this is the best way to get confidence, its god to know the risk and safety of this beautiful art, thank so much, I wolud like to know about differents kinds of discs.

Excellent in every respect. Thank you.

Excellent video. Thank you

Nice safety video. I grew up working with my father and uncle, who had a marble flooring business and i have seen all kinds of accidents. Fingers cuted, etc. I personally have broken my middle finger from a grinder. Something that im sure you know but forgot to mention, is the quality if the cutting discs. Nowadays you can find cheap ,cutting discs that tend to get destroyed really easy and can hurt you , even when wearing protective gear. I think when we come across a piece of equipment that is cheaper than usual we don't think about what can go wrong. But it only takes a second when you are tired , distracted or not in balance while working to end up with a piece of cheap disc stuck in your forehead, leg etc.

MOST IMPORTANT SUGGESTION BEFORE DO ANGLE GRINDER.THANK YOU.

Love this video. Some great tips thanks Athar. I was wondering if you still cut vertically with the course carbide blade or if that is used to cut chamfers by holding it horizontally?

Great tips - which I all follow regularly working professionally as a granite sculptor. However, I find it too dangerous to have the wheel turn toward me. My trick to avoid dust blocking view and clogging the breathing mask: 1) I have an electric air blower mounted on a tripod and have it blow the dust from the point of action away from me. OR - not as practical and universal - 2) I attached a water drip system to my 230mm Makita guard, releasing a thin flow of water to the center of the wheel. I added a spray shield to protect the machine from muddy dust. No dust, no muddy spray in the machine. No electric shock. Flipside: works only when machine is held straight and upwards. However, I strongly recommend version1! An I would not remove the guard! If a piece of the wheel breaks off and flies to your head or body even the plastic shield (which you recommended but didn't wear) and regular work cloths won't avoid serious injuries. Use the guard. And if not get a steel screen shield like it's used by chainsaw pros. You only have two eyes - and they should last a lifetime.

Thanks again that was awesome to see keep up the good work we love you

so clear and concise

Excellent presentation of essential information. Thank you very much

Thank you. Very informative! I'd love to see a video of how you use the copper-colored disk with coarse carbide grains.

I'm on the verge of hacking lumps out of ( or, as my wife calls it, remodelling) a stone hearthplace, and have found this video hugely informative. Un milione grazie a te .

You are so brilliant man I agree to your all sentence

Well done piece about safety with an angle grinder.

Athar great video, very well made and edited. You are a natural born instructor. You should be teaching at art college or trade school level. Thank you for the informative video.

i love your videos love to see a video about the other discs!

Great job and fantastic video. Safety first

Thank you sir I should have learn this long time before

Really very helpful. Thank you.

Thanks Mr.Athar jabir ... it was very useful video 👍

Superb, simply superb.

Another great informative video

Thank you so much.

WELL DONE SIR...THANK YOU.

Impressive

Very nice. Thank you.

Ustad ji tusi great ho

Great video! Thank you so much! Do you have the links to buy the grinding discs online?

ok. thank you very much. Mr. athar¡!

YIKES! The huge blade on that grinder made me nervous just by seeing it! Thanks for the instructive content!

Thank you.

I hope to attend lessons with you to learn more about the field of sculpture sculpture

thank you

This helped me a lot Athar! This made me subscribe :)

Great vid! I want to make grind stones for wheat but have no experience with angle grinder😅

Een hele goede video. Dit is een onderwerp waar je wel een video van een uur over kunt maken. Top werk!

what if we want to cut part of the stone wall. example want to make a door. from the stone wall. and the position of how the grinder way

hey mate, great video. any chance you can send me a link to buy the grinding discs? thanks

Hi, thanks for the video. I would like to turn my stone slabbed back yard into grass turf. After watching your video I think I better leave it to the professional. Do you know what job title I should search for people who can do the job? Thank you!

can you please make a video on polishing

Great video! What respirator do you recommend?

very helpful video! I was wondering if you have any suggestions as to how make sure the cut is straight and angular? Is there a trick I might employ? thanks in advance!

What make of angle grinder is that?

Thank you Athar. Important question for you - where did you get those excellent coveralls?

Hi Athar. Can you put a link in the description where you buy your discs? Especially the cutting one and the heavier grit wheel. Thanks a lot. :)

Good advice ,very dangerous

Hii I'm happy to see of what I have been trying to find please,how or where can I get those dics

Compliments!

When you did the cutting you did not have the protective guard on the grinder. Your video mentioned that you never use the tool without the guard. Im curious if there is a reason to remove the guard in this demo. Thank you!

Greetings from Bonny Scotland. (Gods occasional holiday destination). Your stuff I've just found, and I can honestly say it's the dogs fucking bollocks, well done my chum, your stuff is like a breath of fucking fresh air simply wonderful. Thanyou so much. All the best tha nooo. Love an Light Chris

Can I use that blade on Granite?

Excellent but a bit ridiculous you haven't got the half blde guard attached. If the blade shatters you'll be very vulnerable.

You talk about how dangerous angle grinders are, but yet you use a grinder with no safety guard. How irresponsible can you be??

Great. Thank you for the kind and detailed explanation. Super.

Thank you!!!