This video shows you how to use the Truma Combi E heating system in a motorhome with manual control panels. Truma Combi E can heat the living unit with hot air and heat the water so that you have hot water available in the taps from one and the same unit. Truma Combi EH can be used on gas, electricity or possibly a combination of these. Use of the electric element requires that the car is connected to 230v.
_________________________________
Explanation of how the Truma panels work:
First use the ENERGY SOURCE panel (Symbols explained from top to bottom):
* || = Power 1800w (Requires 230v)
* | = Power 1800w (Requires 230v)* Flame = Gas (This is used when fricamping)
* | and flame = electricity 900w and gas (requires 230v)
* || and flame = electricity 900w and gas (requires 230v)
After you have set the energy source to what is most appropriate, you move on to the control panel.
CONTROL PANEL (symbols explained from top to bottom)
* Only hot water, 60 degrees* Only hot water, 40 degrees
* 0/Switch off the system
* Hot air only* Hot air AND hot water, 60 degrees
LIGHT:
GREEN LIGHT IN DISPLAY = EVERYTHING OK
RED LIGHT IN DISPLAY = ERROR
ORANGE LIGHT IN DISPLAY = WARM-UP PHASE
_________________________________
We at Bobilagenten have made videos that show you how to use the various functions in your motorhome. See our channel for more videos. Electric heating in a motor home. Hot water tank. Hot water. Hot water. #bobil #campingbil #truma #trumacombi #cppanel #elvarme #norsk
31 мар 2023
