Get the DolphinBar here- www.amazon.com/Mayflash-W010-... My Main Channel! ⇨ bit.ly/hj0TIm My Gaming Channel! ⇨ bit.ly/Ok40sB My Facebook! ⇨ on. 10oBUkl My Twitter! ⇨ bit.ly/WKAb45
The only thing I tried that worked. THANK YOU! Side note. If any plays with the updated versions like 5.0-9494 for example and is having trouble getting this to work, just get it running in 5.0 first and then open your newer version afterward. Run your game in the newer version of Dolphin(for better performance in my case) but keep 5.0 open in the background idle. The Wiimote will work for current versions of Dolphin as long as you at least have 5.0 open at the same time. Hope that's helpful to some of you. =]
5:02 For people using version 5.0-9500 and beyond, your Wiimote will vibrant each time you start the emulator, the refresh function indicated here will not be available. Best way to check is to restart the Dolphin emulator and wait for the vibration.
Seen many videos, and been on Dolphin's web but... this video was the solution! Adding this to my favourite for future configurations! Thank you very much! :D
THANK YOU SOOOO MUCH! i don't even know how you translated the "chinglish" instructions they provided but you're a godsend man. I swear i thought my bar was busted
Have to check which version I have installed but I followed your video And it seems to work! I tested mario kart and I could use the wiimote to point and select in the menu of this game. also when driving I could go to left and right with the wiimote. The refresh button didn't worked under dolphin controller configuration? It's in mode 4.
Thanks for a very to-the-point video. The input lag on Wiimote sensor motion isn't tiny but masssive! Easily over ten frames. And for me a deal breaker.
Honestly on PC it's going to be better than on a real wii. Because LCDs TVs had absolutely fucking awful input latency at the time of the console. They still do tbh. With my 1ms monitor it feels like nothing. Get a good monitor and input lag becomes a thing of the past.
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FPP0ANi1-PY.html Just found this, gets rid lag using internal bluetooth. You can use old sensor bar, just need to power it or buy a usb one. www.aliexpress.com/item/4001093553263.html?spm=a2g0o.productlist.0.0.1a5d43dc9klKgM&algo_pvid=b2e787a7-b8cb-4802-adc9-28ed856d5f3d&algo_expid=b2e787a7-b8cb-4802-adc9-28ed856d5f3d-14&btsid=0ab50f0815924665756305508ed2e5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
so still cant get the speaker to work properly but seems pass through is the way to go ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oV4hZxbOkXI.html
I've bought the bar and downloaded a rom for skyward sword but even if the remote is vibrating when I open the game it tells me that the emulator disconnected the wii mote, I've tried everything and I'm kinda going crazy to make this work. Can you help?
Do you know if not-original controllers, those not signed by Nintendo but still looking like ones (Wii Remote and Nunchuk) , will work with Mayflash bar?
Funny thing about Skywars Sword, th egame does not use a sensor bar for aiming, all done with the motion plus. Awesome evice, I just got mine and not set it up yet
Hi, i ordered the controlers with nunchak, but do I realy need the sensorbar to use it with emulator ? Does the cheap sensorbar from ebay work ? Thanks
Hello, excuse me i have a question, i have ordered in internet a Wiimote Plus with nunchuk. Is it possible to play games without Sensor Bar or we must buy the sensor bar. I would like to play Games Like Skyward Sword & Mario Galaxy.
I saw I have dolphin 3.5. My mame cabinet start directly into my mgalaxy fronted. With the mayflash also plugged in it disturbes my usb controller from my pc that controls my cabinet. So my joysticks and buttond didn't work. When unplugging the mayflash and restarting my pc it worked again. Is there a solution for this?
Hello i got question Do you always have a diode on your belt even when you switch off wiimote and you too have Sensor on 2 switch in back i you have this bar plis tell me why is this 2 switch in the back ??
I just bought a Mayflash Bar and the sensor range for my wiimote is only ~24 inches (i measured with a ruler). Any farther than that and the wiimote is unresponsive on the screen. Is his normal?
I plugged with mayflash bar into my xbox to play games. The button inputs work just fine, but the IR sensitivity is way too high. Is there a way to lower my sensitivity?
Is there any way to use more than one wii remote? On their website it says you can, but it just doesnt work for me. Do you use mode 4, or a different mode?
I Have a problem. When I start the game it tells me that the connection with the wiimote was lost. But if I press the home button it works, but it's like I'm not aiming with the wiimote.
Hey I know this video is ancient at this point, but I found my Mayflash Dolphinbar in a box and wanted to get it working with the latest Dolphin, I can't figure it out though. I have Real Wiimote selected, the Wiimote is paired to the bar, it's in Mode 4, and Continuous Scanning is enabled. But, no vibration, and the controller doesn't seem to be working in Dolphin. Any thoughts?
very nice and understandable video.i have in m hands the dolpin bar and i am waiting the order of wii remotes and nuncunks to connect .can you tell me plz,i have readen this : Mode 3: Game Controller Mode - Supports up to 4 Wii controllers+Nunchuck or Classic controller Mode 4: Wii Emulator Mode: Supports up to 4 wiimotes. 1) so do you use mode 4 to play WITH nunchucnk or do i have to place it in mode 3? in mode 4 you have tested and playw wii remote with nunchunk and it's ok? 2)( do i need yo update firmware of mayflash bar ? today i get that bar 3) i read the manual and writes to the wii remote you press home+directon mode right to get mode 4 (as mayflash dolphin) cause by default is in mode 1 (keyboard and mouse)..is that nessecary to do? or by syncronization get iin mode 4? cause you didint change wii remote mode in that video.. tyvm
I ordered an Oem Nintendo Wii Motion Plus and Nunchuk just so I can play Skyward Sword in 4k here's hoping it turns out nicely and im expecting my order to arrive by Monday.
@@jcalvarado07 it works 100% bro im at the last temple before demise and the dolphin bar allows up to 4 wiimotes to work DO NOT USE 3rd party only LEGIT NINTENDO wiimotes and you wont have an issue at all
I see, I have 2 problems, first, I have a Wii original sensor bar but a fake USB Bluetooth Dongle, and second my Winnie is a fake one as well so I think buying this and getting an original Wiimote will solve it all! 👌🏼 Thanks for your reply! By the way did you install the firmware? 😉
@@jcalvarado07 No as I use Windows 10 I simply bought the mayflash dolphin bar and wiimote motion plus and nunchuk from Amazon for 80$ CAD and both worked 100% with no issues.
Gracias (thanks) un dato más, para los que hablan español, tienes que estar a un metro de distancia para que trabaje bien la barra sensora. Ustedes prueben con la distancia. Yo pensé que la mía no servía hasta que me empeze a retirar de la pantalla
que tal el alacanze bro dicen que es un poco inestable el tema de la sensibilidad realmente vale la pena como para jugar juegos de tenis boxeo o incluso al doblar en mario kart es preciso o es muy inestable de controlar ? y funcionara a 2 metros? pienso jugar en una de 50 pulgadas gracias
I really can't recommend the DolphinBar. I was impressed at first but it stopped working after 3 weeks. I then found out that the left Infra-Red LED's broke. Many people on Amazon have reported this issue too.
You need to update the firmware. They fixed the burning LEDs in the firmware. You could replace the broken infrared LED with a new one after updating the firmware.
I literally just bought a pair of wii motes and that same bar just to play Mario Galaxy on Dolphin. I watched a guide about how to configure motion and aiming and I was like "fk this sht!" 😆
the wiimote pairs, the light is on, but when i launch the game supermario galaxy for example, its like the wiimote isn't plugged in. Wonder if i got a faulty bar. Update: I can use the wiimote as a mouse for my computer, but the dolphin doens't seem to work with it.
Hi, I have set my emulator and DolphinBar like you did, everytime I pressed Refresh my Wiimote rumble but when I started the game the message displayed "Wiimote 1 disconnected by emulated software". Do you know how to fix them?
To anyone who has a wii and sensor bar do not buy this just instal ur wii close to ur pc and plug ur bar in the wii and then place it under ur monitor it works because its the remote who senses the lights of the sensor bar
I wonder if the "alternative" Remote Plus + Nunchuk sold in the aliexpress.com (1set-Black-Wireless-Remote-Controller-For-Wii-with-Built-in-Motion-Plus-Remote) can work with this Mayflash bar.
To finally answer my own question, lol It works, but... I have a big tv, 40 inchs, and to calibrate the pointer for this kind of enviroment... It's not easy man. I tried the top, the buttom... it's not precise. The dude in the video is using a typical monitor, maybe the smaller radious makes the sensor more precise? At least that's the theory, I guess. Never played an actual wii in my entire life, I was assuming the mote worked if we pointed to the TV, not the actual bar. I have to point to the bar, I guide myself from there, I assumed we point out to the tv lol Maybe I was expecting too much. Still, it's playable.
***** Naah, the signal works fine. It's a matter of getting used to. I had the wrong impression watching other people playing this, they used the motion and the pointer as some kind of "extension" of the well know analog stick. In games like Metroid and Mario Galaxy, this shit works pretty well, almost on the same level of a mouse. At first, I imagined people simply pointing the thing to the tv itself, the pointer was super precise following the space ratio of the tv (not a small bar) etc... But the reality is far from this, lol This tech was launched 10 years ago, I was ingenous to believe nintendo achieved this kind of precision right at the get go.
***** It's because I have 15, 20 days to get accostumed with the motion thing. By no means it's more precise than a mouse, but it gets close. I was expecting some Minority Report shit, lol But what the tech actually does is pretty neat, serviceable. The materials is pretty cheap, but considering the opinion of a friend who actually owned a Wii years ago, the chinese control works exactly like the original.
I have a problem with the dolphin sensor bar! when i try to connect or sync with one original wii controller, it works fine! but when i try to sync a second original wii controller, it wont sync with the dolphin bar! i`m on modus 4 when i try to sync. in the description appears that the dolphin sensor bar works with up to 4 controllers! is there anything special what i must do to sync a second controller! i tried it like with the first controller, pressed the sync button on the dolphin sensor bar, and than i pressed the sync button on the wii controller. with this, i can sync one wii controller, but like i said it didnt work when i try to sync a second controller to play two player games in dolphin! i have also the latest firmware! when i tried to update it says that the latest firmware is already installed! i hope you can help me and sorry for my bad english, im from germany.
Looks like I lost my stand somehow! Time to get a new one. Too bad I already bought a nearly 50 dollar new wii remote and nunchuk since I read reviews from the fake ones for not working with Dolphin. I didn't even need to get a new remote and nunchuk, I just needed a new dolphin bar... fml. :D EDIT: For now, I have this going the total ghetto way. I literally used Scotch tape to stick it to the top of my TV. Unfortunately, it is covering the very top area, so I can't even see my browser tabs, lol.