How to Wire a 48v 2000w Vevor Kit - JordyBuilds

Подписаться 1,5 тыс.

Просмотров 14 тыс.

50% 1

CHECK OUT MY NEW FACEBOOK PAGE TO STAY UP TO DATE -
www.facebook.c...
My builds will be posted there consistently. You will also be able to ask me questions directly. More coming soon on my plug and play kits!
Hey guys, today I go over how I wire my 2000w Vevor kit. Also same set up for the 1800w kits. If you have any questions feel free to ask!
My builds will be posted there consistently as well as ask me questions directly. Also stay up to date on my plug and play kits that are coming soon!
Vevor Kit : shorturl.at/bozV7
Small Pin connectors : a.co/d/gPqdhX9
Anti-Spark XT90 coonectors : a.co/d/7CTkEzm
MR60 connectors ( only use up to 40amp) : shorturl.at/irvLT

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 86

@hyp3rbowI Месяц назад

thank you so much for this video as my motor was not working and i was worried about why it wasnt then i watched this video and saw that i had a very similar throttle as you and because of you saying you need to use a paper clip to jump the power lock i made a cable with 2 pins on the end that would do the same thing then the motor worked i am so grateful thank you very much.

@JordyBuilds Месяц назад

I’m glad it helped !!

@Jsosodke 5 месяцев назад

How do you make the 3 speed wires go in order ? Instead of 132 make it go 123

@JordyBuilds 5 месяцев назад

Honestly haven’t figured it out

@beauparent8718 4 дня назад

What is that three pin connector called for the phase wires? I can find the two pin XT 90 but not the three pin

@JordyBuilds 3 дня назад

Mr60 I think

@desertrider325 Год назад

You should do a separate video on how to properly add Flux and temps, your setup etc. for soldering those connection. Would be cool if that was in here.

@ebRyder Год назад

Great video my dude...

@JordyBuilds Год назад

Thanks a ton!

@AdrianZuniga-vb8zk 3 месяца назад

is all the re wiring is it necessary? Not tryna be rude but i just had a question becuase im starting a build and im new and im wondering can this just be like a Plug n play? or is some re wiring like required to actually run?

@JordyBuilds 3 месяца назад

Depends which kit you bought etc. you should be able to make it work how it comes

@Manfr_ 25 дней назад

when you put this on a bike can i just get a 72v battery that doesnt need to be connected to a outlet. a

@JordyBuilds 19 дней назад

I’m not sure what you mean but no this is the 48v vevor kit. I’d recommend just getting a kunray my1020+ then a fardriver controller

@MaddConnekRecordz 5 месяцев назад

Terrible explanation need to describe it all in detail for us newbies who have no idea wtf you just said. Where’s the blue wire go?

@JordyBuilds 5 месяцев назад

Go watch another video then 😆

@desertrider325 Год назад

What display is that. Link if possible? Looks bad ass having percentage and Voltage! Game changer! Power has heat shrink added but you skipped how or what you used to properly and safely tap into it. Can you elaborate? Did you cut the XT 90 you wired in and than add the wires with just heat shrink?

@JordyBuilds Год назад

I had the wires soldered to the power wires for my gauge. There’s other ways to do it though. a.aliexpress.com/_msbxcn2

@kittygrey2181 4 месяца назад

Can. Yo u tel me where to find the 3speed button to buy it?

@JordyBuilds 3 месяца назад

Amazon!

@plane-nerd61 28 дней назад

is it a good motor to buy?

@JordyBuilds 25 дней назад

It’s a decent beginner kit if you know how to DIY and solder

@chrisblair3081 Год назад

3 speed seems like a well worth it upgrade

@JordyBuilds Год назад

I definitely agree!

@BrandonJones-co4ce 7 месяцев назад

Do you have a recommendation for a brand lithium battery, ive built a ton of powerwheels but my first razor im building and new to the cintroller and lithium scene, will any 48v 15ish ah lithium battery be ok

@JordyBuilds 7 месяцев назад

Amorge! Join modified razors on facebook and look up amorge. You’ll find a guy by the name of allen and there instructions on how to order

@farrahlyn 5 месяцев назад

I just want to know the best way to put a gear on left side so I'm no spinning the crank

@JordyBuilds 5 месяцев назад

Not sure what you mean. Flip the wheel and weld freewheel

@rod8652 Год назад

seen you on tiktok and i’m building a 48v 2000w mx350. when i checked my hall sensors i saw one missing wire and i was wondering if there’s one missing as well for you?

@JordyBuilds Год назад

I’ll double check today!

@rod8652 Год назад

@@JordyBuilds it’s okay man i figured it out. however i am struggling on wiring this caomm battery

@JordyBuilds Год назад

What’s the struggle ?

@rod8652 Год назад

@@JordyBuilds so for the vevor it has the positive and negative wires like the motor phase wires (they have holes) but my coamms battery has a connecter

@JordyBuilds Год назад

The plug is called a Dean connector, you can cut ring terminals and put the opposite Dean connector on to match battery

@ertynh6004 2 месяца назад

My moter feels like the e brake is on what shuold i do

@JordyBuilds 2 месяца назад

What’s your set up? Also make sure your chain isn’t too tight and also make sure your brakes are actually not sticking.

@ertynh6004 2 месяца назад

@JordyBuilds no it's my moter and it won't turn on either

@ertynh6004 2 месяца назад

@JordyBuilds and when I turn the motor it feels like regen is on

@JordyBuilds 2 месяца назад

@@ertynh6004 hang turning motor won’t be super smooth

@beemerkon 9 месяцев назад

Are you really doing solder vids do you even know what flux capacitor is

@JordyBuilds 9 месяцев назад

lol

@JordanDenn 4 месяца назад

Do you know what wires you would switch to change the direction of the motor

@JordyBuilds 4 месяца назад

Swap two of the phase wires until it goes correct direction. Two of the three motor wires the blue green yellow

@JordanDenn 4 месяца назад

@@JordyBuildsok I swapped the blue and green wires and it goes the correct direction but under load it jerks at take off and won’t go unless have rolling start

@JordyBuilds 4 месяца назад

@user-yp6nl9sh5b swap a different two

@JordanDenn 4 месяца назад

@@JordyBuildsI think I tried every combination but it’s still jerkin

@JordyBuilds 4 месяца назад

@user-yp6nl9sh5b make sure there’s no reverse that’s automatically enabled or something I’m not too sure

@mrkeopele 4 месяца назад

i've got that same controller, I hooked it up to a hall sensor motor and battery lock out and throttle, i was getting a throttle output signal but my motor was not turning! is there any other jumpers necessary to turn this controller on? or maybe is my controller bad? or my motor bad

@JordyBuilds 4 месяца назад

Do you have your electric lock/ key switch set up ?

@mrkeopele 4 месяца назад

@@JordyBuilds I put a jumper wire across it, I was getting throttle output above 4 volts. I'm dealing with a 2014 Bionx 500w 36v motor that I have to remove all the spokes to get it apart to check inside.

@desertrider325 Год назад

How did you come off the battery for power? Need details on that.

@JordyBuilds Год назад

Anti spark xt90!

@billyhendrix 11 месяцев назад

How long of ride times do you get out of that battery setup?

@JordyBuilds 11 месяцев назад

12-14 miles

@DemseyDee Год назад

what batteries do you have and how long do they last?

@JordyBuilds Год назад

48v 15ah about 15 miles

@kids832 5 месяцев назад

how do you charge the battery?

@JordyBuilds 5 месяцев назад

Plug my charger into the battery

@kids832 5 месяцев назад

@@JordyBuilds I didn’t see a charging port

@JordyBuilds 5 месяцев назад

@@kids832 what battery do you have

@kids832 5 месяцев назад

@@JordyBuilds I’m building my own. But I didn’t see a charging port on yours.

@Jyoosh_ 7 месяцев назад

Do you have a link to that fuse ?

@JordyBuilds 6 месяцев назад

Just a standard 12awg 30a fuse

@ashkonrafie5675 Год назад

can you send the link to the throttle?

@JordyBuilds Год назад

Just electric twist throttle on amazon or ebay

@salfred1027 6 месяцев назад

When I plug the motor into the battery and roll the throttle the motor will do like 4 rotations then it stops

@salfred1027 6 месяцев назад

I still have power going through the controller and after the 4 rotations the gear inches forward then goes back to stationary do you know what the problem could be?

@salfred1027 6 месяцев назад

Do you know what the problem could be?

@JordyBuilds 6 месяцев назад

Check your phase wires Try swapping two

@salfred1027 6 месяцев назад

@@JordyBuilds is that the electric lock wires?

@JordyBuilds 6 месяцев назад

@@salfred1027 nope it’s the phase wires

@AndySlug 9 месяцев назад

May i ask what fuse u used? 30A?

@JordyBuilds 9 месяцев назад

30 or 35!

@AndySlug 9 месяцев назад

@@JordyBuildsdamn, thanks for such a quick response mate

@UpNorthProductions 9 месяцев назад

Awesome!

@JordyBuilds 9 месяцев назад

Thanks!

@MaddConnekRecordz 5 месяцев назад

You go by through this so fast because you know it some people here are trying to figure it out for the first time explain the colors you covered the colors up and didn’t explain them. What’s the blue wire go to the thick one you got red, black and blue. What’s the blue one? You don’t show where that goesand you don’t mention it so far that I noticed

@JordyBuilds 5 месяцев назад

I go over it. Blue green yellow is phase wires Red and black or power

@MaddConnekRecordz 5 месяцев назад

Which is the high speed switch it’s all Chinese

@desertrider325 Год назад

Bro! Clean work bench and clarity! Top level RU-vidr man. I already built these and XT90. But wish I had this video first! Would of saved me so much trouble. Cheers.

@JordyBuilds Год назад

I appreciate this comment so much. Thank you truly. Working on a more professional set up. Wanting to get a better work bench and a custom banner for the background! Also will have a Shopify with some custom parts posted soon!