How to Wire a 5 Pin Automotive Relay. Pins 87/30/85/86/87a . Bosch Style. Fans / Fuel Pump / Lights

Подписаться 96 тыс.

Просмотров 614 тыс.

50% 1

This is a how-to video for wiring a 5 pin Bosch-style Automotive relay. I’ve created an actual circuit for you to follow along with, and I explain how they work. Relays are important to have for Fuel Pumps, Electric Fans, Horns, Aftermarket Lights, etc. They protect the switch from damage by passing the higher amperage through the relay instead of the switch. In this specific diagram, it is wired as a "positive trigger" relay. That means that you are controlling the positive side of the circuit with a switch, rather than the negative side.
0:00 How to Wire a Relay
0:52 Pin 30 - Power goes into this from the battery.
1:05 Pin 87 - Power comes out of this and goes to your accessory with the switch ON.
1:23 Pin 86 - Power goes into this from the switch.
2:01 Pin 85 - Goes to ground.
2:15 Pin 87A - Power comes out of this with the switch OFF. It doesn't need to be used.
2:36 Relay Diagram Recap
How to Wire a Relay:
Pin 30 - Power goes INTO this pin from a 12v power source (This could be a battery or fuse box). You should always run a fuse in between the power source and the relay. The fuse size depends on what you are powering. See this video to learn about proper fuse sizing. • What Size Fuse and Wir...
Pin 87 - Power will come OUT of this pin. This pin needs to be connected to the power side of your accessory (LED light, fuel pump, radio, etc.)
Pin 86 - Power goes INTO this pin FROM the toggle switch. The other side of the switch should be connected to a power source (A battery or fuse box.) Theres should always be a fuse in between the power source and switch. See this video to learn about proper fuse sizing. • What Size Fuse and Wir...
Pin 85 - This connects to ground. The chassis, body, negative terminal on battery should all work if they are already grounded properly.
Pin 87a - Power will come OUT of this pin when the toggle switch is turned OFF. This pin is not always needed and can be ignored if so.
Relays from the video:
🔗 5-Pin Relays: amzn.to/3bbIhhO
🔗 10 Pack of Fuse Holders amzn.to/3k4vRgK
🔗 272 piece fuse variety pack amzn.to/3k48cNt
*As an Amazon associate I earn from qualifying purchases.
🔔 Subscribe to This RU-vid Channel: www.rattymusclecar.com/Subscribe
🔔 Follow me on Instagram: @Ratty_Muscle_Car www.rattymusclecar.com/Instagram
🔔 Join me on Facebook: www.rattymusclecar.com/Facebook
CHECK OUT WIRING RESCUE MERCH:
WiringRescue.myspreadshop.com/
Tags:
#RattyMuscleCar
#wiring
#WiringRescue
#Automotivewiring
Please Note: This video description contains affiliate links, which means that if you click on one of the product links above, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you kindly for your support!

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 918

@WiringRescue 4 года назад

Thank You for Watching the Relay wiring video! Subscribe To This RU-vid Channel: ru-vid.com See My Wiring Playlist: ru-vid.com/group/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh

@kankuro4ever960 4 года назад

I have a question about hooking up two screens with a 5 pin relay. Would really love the input if you can help plz.

@WiringRescue 4 года назад

Kankuro 4ever - what did you mean by “two screens”? Like video screens in a car?

@SamSam-us2fh 4 года назад

Great 👍🏻 thanks for your time to made this useful video 👍🏻

@WiringRescue 4 года назад

Sam Sam - thank you for watching!

@SamSam-us2fh 4 года назад

Jeremy N you are welcome, great teacher 😊

@oritrond 3 года назад

This is the BEST explanation on how to wire a relay that I have seen...I've watched a BUNCH of videos on how to do this. Thank you for putting this up. Well done!

@WiringRescue 3 года назад

Thank you for watching! I’m really glad that you found the video helpful!

@reubeng2110 3 года назад

Once you understand the concept its super simple

@starmc26 Год назад

Only thing i do different is wire the switch so that it triggers ground to the relay instead of power.

@keepnitsharp Год назад

Agreed!

@maneateroftsavo1757 Год назад

You can tell how well someone understands a subject by how well they can simplify it... you sir have made relays (an intimidating subject) easy to understand to an average joe. Thank you!

@WiringRescue Год назад

Thank you so much! I really appreciate that!

@davidyoung1610 6 месяцев назад

Excellent video. Clear and concise with no annoying splash openings or music.

@WiringRescue 6 месяцев назад

Thanks for watching! I’m glad you like the format. I try not to waste anyone’s time. :)

@dallas4616 3 года назад

I can’t believe I actually kind of understood this. I’ve been having such a hard time. Thanks

@WiringRescue 3 года назад

Fantastic! I’m glad you find the video helpful! Thank you for watching!

@TheFixerHomeRepair 4 года назад

This is a fantastic explanation! And a very cool little display, so much easier to understand. Please keep this setup and put it in a shadow box in your garage!

@WiringRescue 4 года назад

The Fixer - oh I’m definitely keeping this. It’s fun to play with! Plus you never know when I’ll have to make another one of these videos.

@dennislecompte5297 2 года назад

This is by far the best example I’ve seen. Thanks for making this so simple!!

@WiringRescue 2 года назад

Thank you! I’m happy to hear that people like the wiring videos I make!

@jimmyflint6153 9 месяцев назад

Definitely the best explanation of a 5 pin relay . I’m tryna wire my DRL on my car like the Kia tellurides’ DRL.

@Xpired_PCP 4 дня назад

This is perfect, thank you. I installed aftermarket fog lights I need to have them turn off when I turn on high beams to make them pass inspection and to be in compliance with the law

@WiringRescue 3 дня назад

I’m happy that you found the video helpful! Thank you for watching!

@charlesterwilliams1736 3 года назад

This by far is the best relay instructional on the internet. You are clear and to the point. Love the presentation. Your diagram or char was superb. For the first time I can say I now understand relays all thanks to your efforts.

@WiringRescue 3 года назад

That’s a incredibly nice to say! Thank YOU for watching the video! Share it with some friends if you can! :)

@waynep343 2 года назад

I love it. I wire relays in as kill switches. Looking at the wiring diagrams for that car. Cutting into the power to the fuel pump from the fuel pump relay to pins 30 and 86. Pin 87 continues the circuit to the pump. Pin 85 goes to the hidden switch , the other side of the switch is hooked to ground. On some I use 87A to power a horn under the drivers seat so if the ignition is turned on with the kill switch off the horn under the drivers seat goes off. I normally try to get the 130db horns from the cheap tool store.

@WiringRescue 2 года назад

That sounds absolutely awesome! Haha!

@MKlukowski Год назад

Jawdroppingly simple yet informative. A 4 minute video on something that would be extended to 1,5 hours in school (if even taught)

@DavidSmith-sw5kg 2 года назад

All I have is a relay in hand with no packaging. It was given to me by a mechanic because I was burning up switches to the electric fan in my Jeep. Laid out like a elementary school project makes all the difference in understanding. Labeling the colors functions and placements is a blessing. Thank you so much for your video.👍

@WiringRescue 2 года назад

That’s fantastic! You may like a few of my other videos too about choosing the right wire sizes and fuse sizes. It’s all really important if you want to prevent wires from burning! Good luck with the Jeep! They rule!

@jacobkuehn2440 4 года назад

Jeremy, I've been looking for a video like this for 3 days! Thank you for making this. It cleared up a lot for me.

@WiringRescue 4 года назад

I’m so glad it was able to help you out! Thank you so much for watching!

@lionridds Год назад

Best video I've seen by far! Simple, concise and clear!

@WiringRescue Год назад

That’s awesome! Thank you so much for the kind words!

@rayleeson6135 2 месяца назад

Well I have struggled with the relay I’m using ….that is until I saw this video, really the best explanation after watching loads of videos. My switch is a D+ input and my accessories are a power distribution box and a Dc-Dc charger. Wish I could send you my wiring diagram

@Kevinrowland-dz2ut 7 дней назад

THANKS MUCH-VERY WELL explaned. I bought 5 pin by accident, and now i just wont use 87-a.

@bobhunt3197 3 года назад

Learned a ton here, thank you very much for sharing.

@WiringRescue 3 года назад

That’s so awesome! Thank you for watching!

@spiderrobotheavyduty5028 4 года назад

so cool , thanks for sharing this video.

@babelonchabalala1690 3 месяца назад

Thanks alot man..... I watched another guys video with another diagram for this..... According to him the fuse line goes straight to 86 and 30 and 85 goes to the switch...... Thats why my headlights only shine on high beams when i flip the switch both sides..... I will rectify this tomorrow thanks to you..... Good explanation 👍

@Sr_iRL 2 года назад

Your way of showing us is as the older folks at the car shows would say: KiSS, Keep it stupid simple! Subbed!

@WiringRescue 2 года назад

Thank you! If you like this one, you may like some others I have!

@Sr_iRL 2 года назад

@@WiringRescue I have already checked out some more videos of yours, excellent way of demonstrating how to do it. I already learned a lot from your videos.

@WiringRescue 2 года назад

@@Sr_iRL - excellent! I’ll keep making them!

@oterwill 2 года назад

Incredibly helpful for applying to exactly the application I was looking for! And echo those who have said it's one of the best and clearer explanations out there!

@WiringRescue 2 года назад

Thank you kindly! That’s extremely awesome to hear and I’m happy that people find it educational! I have lots more of you find yourself yearning for more electrical knowledge!

@EndoftheRd 3 года назад

so far the best explanation hands down all over the youtube . thank you soo much VERY detailed video friend , you must be someone off the chain being so committed for your viewers

@WiringRescue 3 года назад

Thanks for watching the video! I’m just a car-guy trying to help out as many people as I can. Consider sharing and subscribing if you’re feeling nice :) I have more wiring videos on the way!

@albertmichau8044 2 года назад

The Best video, not 20 min long talking about birds and what... Great video and explanation THANKS

@WiringRescue 2 года назад

Thank you! I’m glad you enjoyed it! I appreciate you watching.

@UFOGHOSTHUNTER 5 месяцев назад

🐦🕊️🦃🦅🦆🐓🦜🐥🦉🐦‍⬛🪿

@testorossa1989 2 года назад

I virtually never leave reviews but I logged in and everything because this video is that great. Amazing explanation thank you so much for explaining the missing pieces that everyone leaves out.

@WiringRescue 2 года назад

Heck yes! I’m glad you enjoyed it. I make tons of wiring related videos, so if you liked this, you may like some of my others as well! I appreciate you leaving the great review and taking the time to watch! Good luck with your project!

@gatesb24 2 года назад

You have absolutely made sense of this relay to me! Fantastic instruction and the use of the example diagram was exactly what my brain needed to finish a wiring project on my golf cart. Thank you, thank you, thank you!!!

@WiringRescue 2 года назад

You’re welcome! Thanks for watching!

@TVideoupload 3 года назад

Thanks I couldn’t figure out what pin 87a was for and now I know it’s for basically nothing lol.

@WiringRescue 3 года назад

Haha! It is often ignored! I’m glad the video was able to help you out. Thanks for watching!

@wertnwat 2 года назад

I've watched like 20 other videos trying to figure this out in a way that actually explains what 87a was for, thank you definitely helps

@SouthernCrossMotors 2 года назад

This is awesome. Thank you 🙏 I am putting late model headlights in my Lexus ISF. They are LED daylight runners. There are two wires to power. One is for 100% brightness, the other is for 50%. So, when I turn the ignition on, one wire gets the 100% led lights on. As soon as I turn the park lights in, it will switch to 50%. This helped me visually understand what I need to do 😀😀

@jimmycedillo1585 2 года назад

I really appreciate you creating this video. It helped me understand the typical relay circuit I needed for my project. An improvement to this demonstration could be showing the switch receiving power from a lower amp 12v source, say your fuse box, instead of (1:31) showing it coming out of the same fuse powering the light. You could use an 18ga wire to power the second fused line all the way to the switch and thru to the relay (coming from the same battery but routed outside of the video frame). The power feeding the light could be a 14ga wire from the battery clamp all the way to the light. This way, you could visually demonstrate how a low amp switch could power a higher amp device. Also, you could make the wire from the switch to the relay be really long and coiled up to demonstrate how you can use a single cheap long thin wire to control a device that requires a more expensive thicker shorter wire. I bought a 5-pin relay because that was all they had at the auto parts store. Thanks for explaining 87A. I won't need it for my project, but its good to know what it's for. This would have been a good time to introduce to your audience the terms "normally open" and "normally closed." Thanks for sharing your knowledge. -Jimmy

@Dana-hq9mi 3 года назад

Great explanation! I have a question, I want to wire my fans to continue to run as needed on a temp sensor after I turn my engine off. so when I shut off my engine the power to my fan relay is off, I want the secondary power to come on to continue to cool off my engine. Any suggestions/tips on how to wire that up?

@WiringRescue 3 года назад

Thanks for watching the video! I think you should consider one of these adjustable fan switches instead: shop.advanceautoparts.com/p/imperial-adjustable-thermostatic-fan-control-226204/3670006-p You can adjust them to turn on at any temp, and you can wire it to be on all the time (read below). One word of warning though. The reason that almost no cars come with this feature is because it’s dangerous when you are working on the car. If the fan decides to turn on when you are wrenching under the hood, it could really injure somebody. So - I would always recommend wiring it to the ignition power instead. That way it will never turn on when your car is off.

@Halscamp 2 года назад

The best explanation I have come across. You even showed that the same 12 v terminal can be used for the switch and relay. 87A will be used for the small light on my toggle switch when I turn the key on and 87 will make the big design on the same toggle switch glow when I turn the switch on. SWEET. Thanks for taking the time to mock up your wiring display. Subscribed

@WiringRescue 2 года назад

Thanks for watching the video! I'm glad that it was able to help you out!

@unitedcolors2920 3 года назад

Sir plz make video on,, low beam and high beam stay on at the same time with relay and on original car switch

@VinsaneOne 9 месяцев назад

Finally, a clear explanation and example of how 87a works!

@ronster6656 10 месяцев назад

EXCELLENT video. Short. Right to the point. Answered EVERY question quickly. Thank you.

@WiringRescue 10 месяцев назад

Thanks for the kind words! That’s my goal!

@richardflores3899 2 года назад

Now I understand how it works. So far this is the best explanation of how to wire a 12 volt relay with a fuse together. Thank you my good man.

@WiringRescue 2 года назад

Thank YOU for watching! I really appreciate it!

@SuperChriston 3 года назад

1 of the simplest explanations of how to wire an use a relay ,very good work

@WiringRescue 3 года назад

Thank you! I really appreciate that!

@tristancarrington9186 2 года назад

great description, great mapping of how to use relay... you did a great job... thankyou Tristan

@Sultaneous 2 года назад

Thanks! Came here on your recommendation about how 87A works, and was not disappointed. Again, I love the visuals, so essential for getting your point across clearly. Well done!

@WiringRescue 2 года назад

Awesome! I’m so glad that video was helpful in explaining that 87A. It can be confusing for sure. Thanks for watching and keep an eye out for the new wiring video on Friday night!

@AV40FORD 9 месяцев назад

Thank you for sharing your knowledge. Not a fancy presentation, but a very clear & understandable explanation.

@Samualninja 2 года назад

After watching a few boomers try to say it's 2 circuits that require 2 power sources, I'm glad to have stumbled across your video which confirms my suspicion that it can SIMPLY from the same power source. The video is SO simplified compared to others and well laid out. Can't wait to put it to practice. Cheers mate!

@gotbusch7 2 года назад

It should be simple. However you look at it, your relay and switch receive power from the battery, through 1 wire or 2, you choose how many wires you really want to run.

@WiringRescue 2 года назад

I'm glad I could help you out! This stuff is pretty fun to do to be honest!

@quiggybug5653 3 года назад

You explained a relay operation the best yet, great job.

@WiringRescue 3 года назад

Thank you! I appreciate that!

@masterofnone76 2 года назад

This is why i love RU-vid. This is the best instruction on how to wire a relay. Great job!

@WiringRescue 2 года назад

Thank you! Feel free to share it with a friend or subscribe! I have lots of wiring videos and I’m making more!

@JRHoye 7 месяцев назад

This is the exact explanation I needed. Thank you so much 🙏🙏

@WiringRescue 7 месяцев назад

Excellent! I’m glad you found it helpful!

@ukbirmingham1212 2 года назад

now i became a full engineer hahaha i am happy i learnt it was in search badly thankk u so much

@chrisyoung2511 2 года назад

Nice and simple. Thanks for posting. Great description and I love the example board - exactly what a DIYer needs. Cheers from down under mate.

@markpalmer9280 2 года назад

Excellent video for those of us who are electrically shorted.

@WiringRescue 2 года назад

Haha - great phrase! I'm glad you enjoy the videos!

@mariobragaiii4763 3 года назад

Straight forward, Direct and to the point ! 👍

@WiringRescue 3 года назад

Thanks! Glad you enjoyed it!

@dennisbaliton7833 2 года назад

Best video explaining 5-pin relays. Thank you

@WiringRescue 2 года назад

Thank you for watching! I’m glad you liked it!

@jamesfarmer6648 3 года назад

Years ago I drew a relay inside my electrical tool box. To this day I still use this diagram.

@WiringRescue 3 года назад

It’s great info to have handy! Thanks for watching!

@TheWaterman1000 3 года назад

I left a comment that i built a remote control lawn mower. Now I used a 5 pin relay tied to a single 120amp 4 pin relay. This relay is for power and 5 pin relay for grounding engine to shut down via Transmitter. Every thing wired up as the original main wire from coil to enigine break lever on the engine to bteak and short the engine to shut down. I left it intact as plan B. Yank an attached wire to the lever to kill engine. I tapped into this wire and ran it to 87a then wired another wire to ground and ran to pin 87. When rc relay is swiched on by the switch on the transmiter the pin 30 on 5 pin relay will ground out. Not good when you need the engine running, but when power is turned off pin 87a is now ground and the engine shuts down. It works !!! But when power back on throwing ground back to pin 30 ( nothing is attached to it ) engine wont start un less i unplug pin 87a and cycle power on and off plug wire back onto 87a after restartin engine. Will function again as a kill switch. Thinking of installing a arm switch to turn 87a off to grnd then turn on after starting engine. Failsafe on receaver is set to shut down power and engine if loss of signal and power don't want it taking off. If you or others have any further ideas thanks.

@arielban1 4 года назад

OMG.. May I buy you drinks on me? This is the BEST explanation I have found after searching youtube all day that explains relay and 87a. Thank you for educating me. Now I know how to wire up my adventure motorcycle. Going to tour all Philippines on a motorcycle this year. Thank you

@WiringRescue 4 года назад

Wow! That was super nice! I’ll gladly accept free drinks! But if we can’t make that happen - feel free to share the video with a friend so I get another view or two! Also - motorcycle adventure sounds absolutely amazing! Get it on video or Instagram, post a link, and I’ll follow along!

@steveswain3577 3 года назад

this right here is how i use a relay to control a strobe module on a tow truck. some customers want to have all of their clearance lights strobe so i put the clearance lights into pin 30 and use 87a to control the lights on steady burn then i wire a switch from the dash which turns on and activates 87 that powers the strobe module. the output of the strobe module is then wired to the same spot in the junctionbox where my 87a goes to and viola all the clearance lights strobe! just figured id throw in another use for 5 pin relay

@WiringRescue 3 года назад

That’s great info! Thanks for posting it!

@davidanthony9530 3 года назад

Best description of a relay.. well done. Thank!

@WiringRescue 3 года назад

Thank you! I’m working on a bunch more wiring videos, subscribe for more, and thanks for watching!

@Wardy75 2 года назад

Brilliant video, great to visually see a system working.

@WiringRescue 2 года назад

Thank you! If you like this, you may like my other wiring videos too! If you’re bored, check ‘em out! Thanks for watching!

@americancastles Год назад

Thank you so much for simplifying the 5 pin relay set up. You answered all of my questions.

@WiringRescue Год назад

Perfect! That was my goal! I have a few other videos on this topic too if you are bored! :) ru-vid.com/group/PLsF7T1tRFy2hmiiUUfMZNyV-BUA_yrPIh

@VadimNYC Год назад

Thank you so much! Could never really understand this relay thingy magingy until now.

@WiringRescue Год назад

Haha! I’m glad that you found the video helpful. Knowing how thingys work is key!

@omnisurplus7326 3 года назад

You made a world of easy to fresh up high-school day 1989 long time forgot more than I know but it all came back with your schooling thanks a lot for clearing up the mind fig lol..

@WiringRescue 3 года назад

I’m glad that the video was able to refresh your memory! Thanks for watching!

@KuyaKyleVlogs 2 года назад

By far this is the best explanation i have seen👍👍👍

@WiringRescue 2 года назад

Thank you much! I’m really glad you found it helpful!

@rod1133 3 года назад

By far the EASIEST explanation of wiring a relay, there are 57 dislikes at the time of this comment and let me tell you that they are letting you know you are doing your job cause without them you wouldn't have any stepping stones to stay on top. New sub here!!! Keep the videos coming.

@WiringRescue 3 года назад

Thank you for subscribing! I am really glad that people find these wiring videos helpful. It motivates me to make more!

@rod1133 3 года назад

@@WiringRescue I will be back and forth to your page, I too have sum blessed hands and its always nice to see other people's hands at work

@andi2015 2 месяца назад

That was exactly what i was looking for. Thanks so much ☺️

@WiringRescue 2 месяца назад

You’re very welcome

@yrigoyen0108 2 года назад

Very helpful!! Now I understand 87a

@WiringRescue 2 года назад

Excellent! I’m glad the video helped you out.

@larryarcher4502 4 года назад

That is indeed the best explanation of a 5-pin relay I wish I had a had that 5 months ago busted my brain is trying to find a relay on a 96 Toyota pick up they hid mine all the way up by the speedo Toyota didn't believe me until I sent the photo needless to say I put extension wires on it and put it behind the kickboard :-) no more tearing my Dash apart

@WiringRescue 4 года назад

Thank you!! I really appreciate that! Nice move on moving the relay!

@bmw-e30 Год назад

Excellent demonstration and explanation.

@WiringRescue Год назад

Thank you! I’m glad that you enjoyed it!!

@jaygaray4100 2 года назад

Wow this helped a lot using this exact system to wire interrupt a nitrous system for a 2 step thanks

@WiringRescue 2 года назад

Mint! I’m glad my videos are being put to good use. I’m actually working on a cool one next that will be adding turn signal, lights, and a horn to a race car - super cheap and easy. Stay tuned!

@moetimotseki7141 2 года назад

Thank you for this basic and simplified video.

@WiringRescue 2 года назад

Thank you for watching! I really appreciate it!

@brokenwrench404 2 года назад

Thanks for the tutorial. I’m wiring up a pair of back up lights that will be triggered by the back up circuit at the reverse light and with a switch. 👍🏼

@lynskyrd 2 года назад

EXCELLENT job on this video. The cardboard working model was a great way to explain the relay concept.

@WiringRescue 2 года назад

Thank you! If you like this, you’ll probably like my other wiring videos too. Thanks for watching!

@Later2u 3 года назад

Thank you for the explanation and diagram. Very helpful.

@WiringRescue 3 года назад

Thank you for watching! I’m happy to hear the video helped you out!

@luckyramashala6229 2 года назад

The best ever,some guys are confusing but this one

@WiringRescue 2 года назад

Thank you so much! I really appreciate that!

@randyjamesvernon 8 месяцев назад

Fantastic visual and explanation. Thank you

@anthonycastille4753 2 года назад

The best explanation ever!! Well done !! I totally understand the pins now THANK YOU SOO MUCH!!

@WiringRescue 2 года назад

Thank you for watching!

@kcmcCrocker 5 месяцев назад

Great video how to wire a relay- I'm adding a relay to connect power from my radio harness to a back up camera on accessory.

@wtaylor688 6 месяцев назад

Watched all 35 videos,they were great,subscribing to your channel.

@WiringRescue 5 месяцев назад

I appreciate it! Thank you! More videos on the way!

@TheRoostersGarage 11 месяцев назад

Great explanation! I wanted to verify 87a would work this way. I'm adding an auxiliary fan triggered by my A/C switch which provides 12v when it's off and 0v when it's on.

@readplanet23 6 месяцев назад

Thank You sir for the complete open explanation of a 5 pin relay. Your method of “science fair” working board example does clarify a lot. Keep up the good videos. Have A Productive Day! 🛻🚚🚛

@ThomasMampuru-kn9rj Год назад

One of the best examples

@WiringRescue Год назад

Thank you! You should check out my newer wiring videos too if you liked this one! Thanks for watching!

@thetoolwallchannel 2 года назад

Excellent 12v relay demonstrate

@WiringRescue 2 года назад

Thank you much! I really appreciate you taking the time to watch my video!

@ukbirmingham1212 2 года назад

i search a lot but i could not find such an amazing video I now got pull xplaination learnt by heart with this awsome vide

@wlindenlaub 2 года назад

Thank you for all these videos on wiring. They've helped a lot of people out.

@WiringRescue 2 года назад

Thank you for watching! I am thrilled that the videos are able to help people out with their projects!

@wlindenlaub 2 года назад

@@WiringRescue I believe it is safe to say that the vast majority of mechanics would claim that the electrical system on any vehicle is the most difficult to fully understand and trouble shoot. Your videos help take the mystery out of it.

@WiringRescue 2 года назад

@@wlindenlaub - that made my night! Thank you!

@Ezequiel_00616 2 года назад

Omg I’ve been looking for a clear explanation video like this one.

@WiringRescue 2 года назад

Glad you liked it!!

@ibrahimkolade7218 Год назад

Wow! Impressive. Thanks for breaking it down and that example diagram that back it off,Top Top stuff. THANKS❤

@WiringRescue Год назад

If you like this one, you’d probably like my newer videos as well! Thanks for watching!

@cavaking92 3 года назад

Thanks bro it can't get more clear than this 💯🙌

@WiringRescue 3 года назад

Thank YOU for watching! I'm glad you found it helpful!

@miguelsoto9579 Год назад

Wow first time I see a good explanation . Really nice , thank u

@dansolo9978 3 года назад

Brilliant Great Explanation & Circuit Diagram/Model, Now I Know, its Just Constant Power from No5..! Cool..!

@WiringRescue 3 года назад

Thank you for watching! Share it with some friends! :)

@CjanFnd Год назад

thank u, very clear tutorial, with label and connection. thank you alot. God bless sir.

@WiringRescue Год назад

Thank you for watching! I’m glad you found it helpful!

@khimsophacarfixing 3 года назад

Thanks for your sharing knowledge!

@dvsdad1300 2 года назад

Thank you for doing this. Very much appreciated

@awesomearizona-dino Год назад

Thanks for all these videos, Super helpful, ive been in car business all my life, in the past i always avoided electric repairs/work, now im am more confident and do it myself. (Except for CAN bus).

@WiringRescue Год назад

That’s wonderful to hear! Thanks so much for watching! I’m really happy to see that these videos take the some of the fear away from wiring!

@ReneDiaz-nt8pi 6 месяцев назад

Awesome video you made my day I was in stuck mode THANK YOU!

@WiringRescue 6 месяцев назад

Glad the video helped you out! I appreciate you watching!

@danilotuazon5535 2 года назад

The best explanation in wiring.

@WiringRescue 2 года назад

Thank you! I'm glad you enjoyed the video!

@elblitzb 8 месяцев назад

Thanks for sharing mate. Very clear.

@strong_man. Год назад

Best explanation ever for 5pin relay

@martyz5418 3 года назад

Great Explanation ,Thank you.

@WiringRescue 3 года назад

Thanks Marty! I appreciate you watching!

@voxs77 2 года назад

Great video. Super simple diagram. Thank you!

@WiringRescue 2 года назад

Thanks for watching! I’m glad you liked it!

@ukbirmingham1212 2 года назад

in this video the pin 87 is yellow wire connected to bulb. if you cut the yellow wire the bulb goes off because it need a positive wire. I in don't know electrical works hardly i made it but i forgot the to connect pin 87 and i connected any other wire from the same circuit to the bulb and it was working same as in this video it works on/off. the circuit was functioning same like this video i am so much confused why this circuit working without pin 87? . is this normal or really strange?