I have replace abs unit for my car santa fe 2007, 2.7, 4WD, EPS, abs type s/w 60303 ver 0204. And bleed air from wheels. The problem. Is clunk sound Inside abs unit when press break at low speed. No signal abs light, the abs working good as break, the problem only the clunk sound. So please could you advice me how solve this problem. Thank you very much for your help.
I found my front right outlet valve is stuck (not opening with nt630 obd2 reader). Am I able to clean or force the valve to be unstuck? All others are able to be turned on and off on the ABS module. Causing sinking pedal, only brakes at the end 1/4. Changed master cylinder and bled already.
How are you sir, I have a question please... How can I install the motor indoors? I mean, how can I put the small motor back in? Because I see two pieces inside that prevent the motor from being inserted?
Really nice video , I have a question , my abs pump has the connections full corrosion , some pins are gone , if I remove the "computer module" does the coils contain any oil ? Or can I remove the module from the metal block without being worried with the brake fluid ? I already think it doesn't contain any fluid but it is just too make sure
Sr. Peter donde consiguió el módulo, tengo el mismo el mismo problema escape 2010. Gracias ! Mr. Peter where did you get the module, I have the same problem escape 2010. Thanks
nice one .. I have been attempting to solve my sinking brake pedal on Citroen C5 saloon car .Learning to operate the Foxwell NT 630 plus scan tool has been the biggest challenge for lil old 77 yrs me . I am getting there SLOWLY . third session of ABS bleeding coming up soon .
@@PeterFinnTheCarDoctor Hi from Richard . I have resealed the master Cylinder and bought a Foxwell NT630 Plus abs bleed scan tool . Once I had got my 77 year old mechanics brain around the scanners instructions . I am please to confirm that My sinking brake pedal problems are a thing of the past . In 1980 I was the Donnington GT championship class winner .. I manufactured my own space frame chassis and Fiberglass body work . I incorporated GROUND EFFECTS into my self made race car . My car was the only car with ground effects .. I used to lap most of the opposition . All good memories .
