No video :(

HowTo28: EASILY Replace a Reversing Valve + Tips & Tricks :)

Подписаться 7 тыс.

Просмотров 9 тыс.

50% 1

Please Subscribe and/or Like! It really helps out the channel! Thank you!
In this video I show how to replace a reversing valve the easy way! Plus, like always, I throw out some free tips and tricks :)
Related Videos...
Tools2: Making a Portable Vise and Other Vise Modifications
• Tools2: Making a Porta...
Related Playlists...
HVAC How To
• HVAC HowTo
*All sales, returns, etc. are handled by Teespring. If there are any issues please contact them directly at...
support.spri.n...
________________________________________________________________________
*All the information provided on and by this channel is for informational purposes only. This channel makes no representations as to accuracy, completeness, currentness, suitability, or validity of any information on this channel and will not be liable for any errors, or omissions in this information or any losses, injuries, or damages arising from its display or use. All information is provided on an as-is basis. Always follow OSHA guidelines and all other safety guidelines. Never attempt to do anything unsafe or beyond your skill level. Always hire a professional if you need to.

Опубликовано:

15 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@chrisgrantham7654 11 месяцев назад

No joke on the knee pad stuff. I spent too much of my career working harder, not smarter. Ruined my knees, worked in horrible conditions because I thought I was tough or something. HVAC/R is tough work, but it is important to make it as easy on your body as possible. 27 years in and still loving it. Great content - keep it up!

@matth.4932 День назад

Thank you so much for such a detailed video. I can tell you take pride in your work. Keep up the great work! You earned my subscription and like.

@Sakyn4 4 месяца назад

Brother, you're a genius. I had such a terrible time on a Ruud R-Valve. If I did what you did, I could've turned a 4-5 hour situation into a 2 hour one. Damn pipe wouldn't budge on the outlet sides and putting in a new one was nightmarish as well.

@HVACLife 4 месяца назад

Thanks buddy! 👍

@vincentgelles3805 11 месяцев назад

I’ve changed many reversing valves and that’s exactly how I do it. I cut at least two of the larger pipes with straight snips as close to the valve as possible, un-braze the discharge and true suction, then just un-braze the two stubs. It makes it so much easier then trying to find a place to cut with a small tubing cutter and then having to swage or coupling everything back together. I’m in heat pump country (Eastern North Carolina) and 99 percent of what I work on is heat pumps so I replace a lot of reversing valves inevitably, whether they are not shifting properly or leaking refrigerant.

@vincentgelles3805 11 месяцев назад

I also like that you used a rosebud tip. I always use a rosebud on reversing valves and I’ve gotten to where I use it on 90 percent of my brazing. I still use a number 2 tip sometimes but if you know how to control your heat, you can use a rosebud for everything even smaller tubing.

@rustygragg6317 4 месяца назад

i have worked in this field for over 20 years but never did this until a couple of years ago and it saves so much headache. also, it doesn't apply to this style of trane, but on a unit with the valve inside i started unsweating the condensor coil so i can get eye level with everthing. you can have most coils out in ten minutes but it saves an hour of bending over trying to braze

@HVACLife 4 месяца назад

Right on! Yes removing coil is normally not too bad 👍

@dmvhvactech 11 месяцев назад

Nice work on the rv install. I've done two in my career, 1st one on a carrier that took me two tries and then got it 1st go on a goodman. If I had to do one again, I would be tempted to try out these brazing rings I saw. I think they may have a spot in the torch kit, but I've never used them myself.

@dmvhvactech 11 месяцев назад

@@HVACLife From what I see you can press the rings flush into the fitting side and they hold in

@wolfhvac943 11 месяцев назад

This is going save future me some grief. Another great video!

@wolfhvac943 11 месяцев назад

Yup September is always good for a breather haha all good here, just getting loose ends wrapped up. Have you ever looked into jewelers torch’s? I have one and it’s nice for these things. It’s smaller but light weight and much more flexible. Works nice with a rosebud.

@wolfhvac943 11 месяцев назад

@@HVACLife smith quick braze is what I’m running.

@victork3397 5 месяцев назад

Love the knee pad. I’ve been using the same one for about a year.

@HVACLife 5 месяцев назад

Yeah too many people in the trades don’t take care of their knees 👍

@MariosACandRefrigeration 11 месяцев назад

nice work.

@Christopher-li7uc 11 месяцев назад

Job Well done broski

@pochikyanharutyun4511 11 месяцев назад

Very helpful Thank you

@johnerway7255 6 месяцев назад

Lots of great information here. Thanks for sharing. Great job.

@HVACLife 6 месяцев назад

Thank you my friend!

@ccthepope 11 месяцев назад

Great tips!!

@kc00 5 месяцев назад

You made that look easy.

@nadjibmahmoud9472 6 месяцев назад

great tips thank you for your great content that you share with us.

@HVACLife 6 месяцев назад

You’re welcome! Thank you for being a part of this community 😊👍

@mwdub02 11 месяцев назад

Lol it’s always the helper 😂😂

@sterlingarcher46 11 месяцев назад

If only i could find a bloody rosebud tip ! Bloody Nora and most of the brazing I do is on larger diameters too , yet when i mention it they look at me like I'm from another planet or something ... And very true about the knees , i always wear knee pad inserts that go directly inside the trousers, this way I never kneel directly on the floor 😎

@sterlingarcher46 11 месяцев назад

@@HVACLife They're a joke in my opinion unfortunately. We don't even get Nylog man !

@NROhvac 6 месяцев назад

Good job

@phillipjoy1305 4 месяца назад

That rosebud tip works great 😊 good job

@noahbrowning4293 5 месяцев назад

Heard your comment about knee pads, never used them when I first started and now I’m 22 and my knees pop when I stand up😂😅.

@HVACLife 5 месяцев назад

Yeah buddy take care of those knees lol 😅🍻

@MarkJones-no2zf 11 месяцев назад

Why can't they design a reversing valve with flares or roto locks so you don't have to braze them in save time and cost to the customers

@makswell6993 15 дней назад

Are you not worried about metal shavings from using the tin snips?

@HVACLife 14 дней назад

Good question! Not at all, when tin snips are used properly (ie the point never plunges into the material) there are no shavings only shearing. The cable cutter also shears, it doesn’t produce shavings either 👍

@Raulachu 6 месяцев назад

Yep, those steps are it.

@ride856 11 месяцев назад

@ 4:05 did you purposly dump water into the lineset?

@ride856 11 месяцев назад

would you attempt that with a turbo torch, the rosebud really seems to come in handy in them tight applications?!@@HVACLife

@jlsrr2577 3 месяца назад

Stabrite 8?

@HVACLife 3 месяца назад

I'm a huge fan of Stabrite 8! In this case my preference is braze, but stabrite is certainly easy to underestimate!

@nathanhurst5155 11 месяцев назад

I love using a rosebud. I’ve had people tell me I’m gonna burn shit up by using it. Jokes on them tho cuz those guys ruin stuff on the regular. Yet have I ruined anything since I started using one.