Hoyt Axia Syntactic Foam Limbs Review | GMX 3 Series

Подписаться 94 тыс.

Просмотров 14 тыс.

50% 1

How do the new Hoyt AXIA Foam Limbs feel? Are the syntactic foam cores better than bamboo on recurve limbs? I review the new @hoytarcheryofficial GMX 3 Series Riser and AXIA Foam Limbs in this video.
Link to AXIA Foam Limbs: collabs.shop/fo38nm
GMX 3: collabs.shop/zymbpt
Limb Gauges: collabs.shop/tropl6
Bow Vise: collabs.shop/j5meox
Get Precision Tiller Bolts and Tuning for Performance at jakekaminski.com
R Core Custom Grips can be found at the following link:
rcore.co?aff=5 Use Code: KAMINSKI for 10% off any R Core Custom Grip!
Chapters:
00:00-00:55 Intro
00:55-11:21 Unboxing, First Look
11:21-16:50 Setup
16:50-29:20 Tuning
29:20-34:32 Final Thoughts
Consider Supporting My Channel!
Join my RU-vid Membership for exclusive perks: / @jakekaminskiarchery
Become a Patron on Patreon: / jakekaminski
Visit my website jakekaminski.com to explore various ways to support my channel, including purchasing books, apparel, digital coaching, and more!
Send Cool Stuff To:
Jake Kaminski
P.O. Box 742
Micanopy, FL 32667
For business inquiries, please email me using the address provided in the channel info.
**Disclaimer: Jake Kaminski is a participant in the Amazon Associates Program. By clicking on Amazon links and making purchases, you can support this channel without spending any extra money.
*Please note that items sent to my P.O. Box cannot be returned.

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@MushuSpung 10 месяцев назад

Hey man thanks for the uploads. Buying my first bow tomorrow morning and cant be more excited.

@TracyPicabia 10 месяцев назад

Again, really terrific useful content. Jake's openness to throw his own subjective biases into the equation speaks volumes, eg @26:38. That's a rare talent among experts unfortunately imo.

@moltenbullet 2 дня назад

I guess my biggest concern would be all the white printing, which I just know will turn yellow with time due to the acid used in white print (unless they've anticipated this and used some kind of acid free print)

@xDmyfavouritevideos 10 месяцев назад

Hey Jake, hope you get well soon :), can’t wait for the 70m scoring and full review of gmx 3 and axia foam Just curious if you could explore the draw chart curve of the Hoyt axia ilf and compare to the wiawis MXT XP ilf? I think it would be interesting to see the difference between the two brands

@Death_Spot 10 месяцев назад

Where can we found this type of data (draw chart curve of different limb's manufacturer). I'm interested in. I'm a long draw lenght guy (31"~31,5") with a moderate strenght (my max weight will be 38 # at full draw I think). I'm searching for maximum confort at full draw. I use 70" bow for the moment, perhaps i'll go to 27" riser. Thanks.

@pufti9153 10 месяцев назад

Hey Jake great video. since you have tried and reviewed so many different bows over the years. What would be the most "bang for the buck" olympic recurve bow setup you would recomend? You know without going all out and buying the latest and greatest.

@eyehorus2328 10 месяцев назад

Hi Jake, thanks, great content again! I‘ve got the same set-up (GMX3 and Axia syntatic limbs). I wonder if your limbs reach (enclose) the tiller bolts? I have ~1 mm space between the bolt and the bottom of the limbs semi-circle (whatever that is called). I can shoot, but hear also a kind of „cracking“ when pulling the bow, similar to your testing of the older Axia limbs, but louder.

@TomasPruzina-uw9ql 10 месяцев назад

Hi Jake, have you tried using thread lock glue instead of raw torque to fix screw threads in place? These things work great for bike suspension, I would imagine they will work great for bows as well.

@berryreijseger8200 10 месяцев назад

Hi Jake, will you review the new barebow weight for the gmx?

@aznkid248 10 месяцев назад

curious on your thoughts of the Hoyt Axia wood and foam. If you could provide your thoughts on both limbs?

@peterxyz3541 10 месяцев назад

I thought about adding a Teflon or nylon washer in the tiller bolt to soften the crush on the limb edge.

@TracyPicabia 10 месяцев назад

I've done that on my barebow set up to get a small amount more weight with the bolts maxed down. Got to be careful not to havr the limbs go beyond flat against the bolt though

@dodo9595 10 месяцев назад

Are you really coming to Puerto Rico? 🙏🏼 🙌🏼💪🏼🏹

@longbow46 10 месяцев назад

With the delrin pads at the end of the limb, does that now mean you could also turn tiller bolts in further than other limbs before the bolts contact flat on the limb surface? Or is extra care needed to not overtighten them?

@rogercastillo6547 10 месяцев назад

Have you ever considered trying the AXIO360 for your shoulders?😊

@ZephrusPrime 9 месяцев назад

Do you think the new geometry of the GMX3 and XD are an improvement and or has effected the balance and action? I noticed that a lot of the Koreans switched back to the Xceed after using the XD.

@jktous 10 месяцев назад

Hi Jake is there any coaching video for beginner on the Archery, thanks

@thomasstrasser3318 7 месяцев назад

Hey Jake, what is the nockpoint high you meassured?

@janickgonzalez8900 10 месяцев назад

hey jake, is it true. you were in columbia or mexico recently for an archery event?

@manuelnunes8415 3 месяца назад

I would like to know you opinion on bamboo on recurve limbs?

@russellscharman6746 9 месяцев назад

For a Barebow Recurve Archer: With tiller split as measured would it be advisable to reverse limbs (bottom on top/ top on bottom) to get a negative tiller to start a tune?

@leeandmayuedwards7061 18 дней назад

Jake just a quick question currently transitioning from a win win ATF dx to a gmx3 I shoot 47lb on the fingers with 30in draw and 70 limbs trying to work out what poundage limbs I need to maintain that draw weight on the fingers So is it possible for you to tell me min and max weight achievable on the fingers with 70 42lb limbs

@typhoon2827 10 месяцев назад

Morning, Legend. What's the three thou difference in limb bolt diameter look like on a 70m round score, everything else being equal? Is it within the standard deviation around your current 720 mean score or is it significantly different? Apols if you've done a video on this and I've missed it.

@JakeKaminskiArchery 10 месяцев назад

Product Announcement: Precision Tiller Bolts | A Passion for Precision ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZirD-3jSzt0.html here is a video showing how much of a difference it can make. IIRC the gap between the limb and the tiller bolt was in the .008” neighborhood and the groups could be shifted around 10” or so down at 70m by bumping the limbs. This bow had .0035” gap so it would shift the groups less but to me, still potentially significant.

@typhoon2827 10 месяцев назад

@@JakeKaminskiArchery thanks 👍🏻

@-fazik-3713 10 месяцев назад

Why not make "washers" for tiller bolts instead? Easier to use, replace and would fit all ILF limbs. I like HOYT limbs because they are not that "snappy" as W&W. They feel more like I'm used to - traditional wooden limbs :D.

@Hatchet898 8 месяцев назад

Do any of the precision tiller bolts fit mk beta risers?

@andreask.654 10 месяцев назад

What material is "foam" actually made of?

@THECOFFEEPOT 10 месяцев назад

You could hear your shoulder click at the end of the video. Hope you get it sorted out.

@chesterclark5099 10 месяцев назад

Those are pretty loud limbs compared to my mxt 10. The mxt 10 are silent and fast as hell

@n.k5000 10 месяцев назад

Mxt 10s are an absolutely unbelievable limb, probable one of the best ever. Unfortunately a lot blew up so it seems win and win have played it safe and made a slower limb in their new mxt xps. Sad really the mxt 10s we’re stunning to look at and so quiet and smooth and lightning quick. The axias feel close, and they’re a really good limb too, but the mxt 10s we’re just in a league of their own.

@JoeTheBeanVR 8 месяцев назад

MERCA riser

@mikemace4435 10 месяцев назад

Omg .. your putting the limbs in backwards

@blackspeed69007 10 месяцев назад

An ither awesome review.🫡 @Jake would you recommend using the highest vertatune plate when we shoot your LPP grip? I have one on 2 risers and can adjust plunger height on both. Cheers :-)

@JakeKaminskiArchery 10 месяцев назад

Personally, I would and did in Rio.