Hozelock Garden Hose Connector Review Standard Vs Plus Vs Pro 

I found this video after getting totally fed up with hozelock at mums place where the water pressure is very high. Perhaps not fair on Hozelock due to that pressure but I find the connections to be pathetically weak. I didn't know about the Pro so I suppose I'll give that a go. I'll also look for alternatives but my hopes are low. Thanks for posting your video.

Just the video I needed, thank you fella

Useful video, many thanks I think I will upgrade from the cheap Plarstick to the mid range.

For me hozelock constantly leaked between tap and short hose from tape to reel at various places , no amount of tightening fixed it , new ones the same , they would pop out of the connections now and then , I needed to keep the water on to squirt cats in the garden but could not risk flooding the garden. Replaced with brass ones and so far seems to work.

Very informative video, thanks. What is plaustic? Just an addtional point worth mentioning, don't use the aquastop type connectors if connecting your hosepipe to a pressure washer as this can damage the motor.

This was a good watch, thank you good sir. 👍

Thank you for this informative video!! 😁

Great review Charles

useful review. Thanks!

thank you

Nice video,

Isn’t it plastic not plarstic?

Really useful video. I just buy a hazelock, and what ? There comes no water, now i know, it has a autolock.

If you want to change couplings every few years go for it. Some people like a change. Otherwise checkout Geka and water profi's stuff. Geka couplings dont reduce the diameter like hozelock too so you get full flow and full pressure! These will last decades. Get a rubber hose (not PVC) and your set for more than 10 years. Plant nurseries use this rationale. Plastic hozelock stuff is for people who buy Ikea furniture, they all spend more and get less appreciation of it in the longrun :0( If you want a change every few years with these couplings you can always polish the brass up!

hi , i have the hozelock 40m autoreel,recently my water pressure has dropped,ive noticed if i push the aqua stop connector towards the gun the pressure increases, any idea what the problem is please? thanks

what would you do if the connector leaks water? I've already tighten it up as much as I can

do hoselock make a connection.I have 2 outside taps hot and cold and want to make them join into 1 in order to use as shower for outdoor use

Made of PLARRSTIC aye ? Is it a new material

I wonder if they use inferior plaaarstic on the Gardenierre products?

In summary, go for the meetel one, not the plarstik.

Hi mate, I got the hozelock 100 pressure washer (7900). I lost the water stop connectors. When I just plug the standard connector to the washer, it doesn’t look like it is fitted perfectly. Do I really need to buy the plus connector? Is there any difference between the deep of the standard and plus connectors for plugging different length of the inlet into them? Thanks

Thumbs down just for putting a R in "plastic!

Will this fit a 19mm hose

I replaced the

You should think yourself lucky that you have that much sun.

PLARSTIC.

PLARSTIC....Really?