No video :(

HP Tuners MPVI2 Pro Link analog inputs AEM X-series 30-0334 Wideband 30-0300

Подписаться 2,5 тыс.

Просмотров 26 тыс.

50% 1

I purchased the MPVI2 and the AEM X series wideband with OBD CAN BUS integration # 30-0334 when the MPVI2 was released. Originally the AEM 30-0334 wideband was the only wideband available that worked with the MPVI2 but was limited to 2007 and newer. When the Pro Link and Pro Feature set was released I converted it to use analog input on the HP Tuners Pro Link like you would find with the 30-0300 AEM X-series. So I can data log a wideband O2 signal on any vehicle I'm tuning with Hptuners MPVI2 Pro Link. After this modification it works perfectly with the Pro Link and eliminates the OBD port adapter it originally came with. Also allows me to data log wideband signal on any vehicle I tune with HP tuners even if it is older than 2007.
Pin part # ... SPUD-001T-P0.5
Wire type ... 22 AWG stranded wire
Follow us and the shop projects on
RU-vid.... you can like and subscribe here
Entire G35 LSx Swap Playlist:
• G35 LS Swap BUDGET bui...
C10 LS7 vette engine swap
• C10 LS7
Tired Creek Lake aka TURKEY FOOT Lake Cairo ga
ru-vid.com?list...
Follow us and the shop projects on
RU-vid.... you can like and/or subscribe here
Also! Follow us on Facebook and Instagram:
/ ridleyautomotive
Instagram/ridleysautomotive
Or! visit our websites...
www.ridleysautomotive.com
www.section8performance.com www.tubebuddy.com/S8Auto
Music by Retnik Beats:
(www.youtube/c/retnikbeatsbe/)

Опубликовано:

12 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@LiveeviL6969 3 года назад

The blue wire from the Pro Link is Analog 2, not 1 as described at 9:00.

@franco804 5 лет назад

This video is GOLD!

@joshuas.4967 3 года назад

The EXACT video i needed to see! THANK YOU!!!!!!!!!!!!!!!

@downsouth4-doorcaddy242 5 лет назад

Amazing your awwesome great educational content

@GonzosGarage 5 лет назад

thanks man

@stevevalenzuela5138 2 года назад

Thank you very much

@RadicalHippy 4 года назад

I had to use perimeters in instructions to make mine read same in hp tuners as it did on gauge.

@Protect_ya_n3ck 4 года назад

life saver

@precisiononeserviceselectr6105 4 года назад

When I cut my obd port of it had about 15 extra wires in there lol. Just tied them back. We'll see if it connects to software tomorrow 🤞 good video

@nastyz2882 4 года назад

Did you get it too work?

@GonzosGarage 4 года назад

how did it go? everthing working now?

@precisiononeserviceselectr6105 4 года назад

Yes got it to work 🤙

@lordandprotector 5 лет назад

Only thing is, the OBDII version of the gauge (30-0334) "speaks" OBDII CAN protocol, instead of the AEMNet CAN protocol, like to 30-0300/0310. So, it MAY not work with the ProLink CAN input without being re-flashed back to the 30-0300 firmware. Depending on how HPTuners implements the interface.

@GonzosGarage 4 года назад

it worked perfect first try this way when i did it on the MPVI2 and the latest software update as of when this was recorded. i have had some viewers say they needed to adjust parameters to what AEM had in the instruction... not sure why tho unless they were wonky before they started this process or were not on the latest HP tuners update.

@mmratinez 3 года назад

How to I connect pro link cable to my aem 30-0300? Not quite understood as to how do it properly .

@utubeacount10 4 года назад

Okay so ive got the AEM 30-0300 x series gauge. Can i use the CAN high and low wires instead of analog inputs to connect to my ProLink? I will have the whole Pro Features Kit.

@justinjurica6455 5 лет назад

Or you can use the AEM 30-0300 and connect it through the EGR or other unused sensor in HP without buying ProLink stuff.

@GonzosGarage 5 лет назад

This is true but when you start tuning multiple vehicles a week and its not your car you dont want to start rigging up stuff to there harness.

@YUTALATEUS69 3 года назад

So you're using two wires out of the prolink what do you do with the others

@1stedfast 4 года назад

thank you for this very good video,I have a 300c srt8 06. I did no pay attention and i got AEM 30-0333 X-Series Wideband with out using the obd2 Is it possible to send a signal like CONN A 3can L 4can H directly on the canL and canH on the car, or using rs232 connector pasthrought my MPVI and be on my computer to dataloging HPTuners please help i d'ont wont to buy a MPVI2 thank's

@GonzosGarage 4 года назад

in theory yes that should work but i havent tried it that way. sorry i didnt get back to you sooner. did you get it all sorted out?

@franco804 5 лет назад

Okay, so let me get this right. If I have the original mvpi2 non pro, and buy that $34 USB cable from hp tuners, follow your video, the aem wideband will work and log afr on my non canbus 2000 Corvette??

@GonzosGarage 5 лет назад

No... well not sure... I dont think it will work with out purchasing the pro feature. I purchased the pro feature and then did this because I wanted the MPVI2 to match the ease of the original MPVI Pro so I could quickly go from car to car.

@TwinTurboRamAir 4 года назад

I got a 2002 Ws6 Trans Am. I bought a new HP tuners MPVI2 standard and a new AEM 30-0300 wideband. So If i buy this HP tuners pro link and wire it up like you shown in this video, I will be able to data log?

@GonzosGarage 3 года назад

only if u have the pro feature set purchased for ur mpvi2. u can use the same wires but run it to ur Serial port on ur laptop.

@wakelifeassociation4993 5 лет назад

Dude I bought the mpvi2,pro link and aem 30-300 and did exactly what you did and for some reason when I connect my car it disappears

@GonzosGarage 5 лет назад

did you just purchase the pro link pig tail or the complete Pro Feature Set?

@bretroe5183 4 года назад

Did you need to purchase the pro software as well or just the pro link cable

@zachpijanowski 3 года назад

You'll need to purchase the Pro Features Set for the MPVI2. It includes the software and the pro link cable for $249.99. I just bought mine.

@ahmedalhameli8732 4 года назад

Where I should connect the black and red wires that are in the other side of the connector

@greggorham5257 4 года назад

I was just about to type the same. I'm assuming based on instructions they need to be on a key on wire and ground. My confusion is that the MPVI2 already has power so I'm assuming this power is for the gauge if you install. I will try without and then if something is off I will know to connect these.

@sergiogabriel643 5 лет назад

hey I followed your video step by step but its not working on my fbody. everytime I start the scan, the WB info disappears. any advice?

@GonzosGarage 5 лет назад

did you just purchase the pro link pig tail or the complete Pro Feature Set?

@chrisbryant1657 3 года назад

@@GonzosGarage Which do you purchase for aem 30-030 complete pro link feature set or pigtail harness you're referring to? Or both?

@lawadm1 5 лет назад

What if you have the AEM 30-4110?

@GonzosGarage 5 лет назад

works the same.

@lordandprotector 5 лет назад

Nice surgery :) Keep those spare pins, though... The ProLink will eventually be able to read the 30-0300/0310 CAN data directly. Which is better than either the analog or OBDII data connection :)

@GonzosGarage 5 лет назад

Yeah I know. Cant wait for them to get all the Pro Link software finish.

@utubeacount10 4 года назад

Have they came out with this capability yet?

@lordandprotector 4 года назад

@@utubeacount10 Yes,

@Teknickel_ftw 5 лет назад

I would rather buy a serial adapter and use that instead way cheaper than a pro upgrade

@GonzosGarage 5 лет назад

that is very true sir but I got purchase happy when the MPVI2 was released so I wanted to get the Pro Feature like my original MPVI I have and in the long run its proved to be a much simpler set up when im using it daily in multiple vehicles

@Teknickel_ftw 5 лет назад

@@GonzosGarage I only have one car that uses the tuner so it dose not makes sense for me but if I use standalone data logging then it would be worth it.

@TwinTurboRamAir 4 года назад

do you have a tutorial for that?