Wideband Install Using Serial Connection and HP Tuners, AEM X-Series

Подписаться 114 тыс.

Просмотров 78 тыс.

50% 1

Support Those Who Support The Garage
For more tuning content check out our partner Elite Tuned School:
www.elitetuneds...
Check out the latest tuning courses and classes and don't forget to use code "goatrope" to save 5%
QA1 Motorsports: www.qa1.net/
Nitrous Express and Snow Performance:
www.nitrousexp...
Check out HP Academy: bit.ly/3kobFJZ
Use Code GOAT75 for $75 off!
We use ICT Billet for brackets and more, the best prices for the highest quality parts:
www.ictbillet.com
Links and Merch
Make sure to swing by the Garage's website and pick up your own "Tuned By Me" decal at www.goatropegar...
All Patreon members get early access to videos, special Patreon only videos, giveaways and merchandise. Tuner Tier Patrons gain one on one tuning assistance from the Garage, check it all out below:
/ goatropegarage
Check out our merch store for all your GRG gear!
teespring.com/...
The Garage uses AEM wideband sensors/gauges, grab one below:
amzn.to/33VU1T5
Get your own HP Tuners MPVI3:
amzn.to/3Wmt0pJ
Find the whole Tuning Series Playlist here:
• HP Tuners 101, Tutoria...
Check out the Quick Tuning Tips Playlist here:
• Quick Tuning Tips
Business inquiries can reach us at: info@goatropegarage.com
E-mails requesting tune support will be ignored, please use the Patreon for tune assistance. / goatropegarage
Goat Rope Garage is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 329

@jeremyrobertson81 4 года назад

What terminals do you put the wires into on the RS232?

@MJW59 4 года назад

I was going to ask same thing.

@GoatRopeGarage 4 года назад

Blue to 2, ground to 5

@TheSmokeattack 4 года назад

What about the others wires I got the connecter but I don't what pos to run to and can I run power from fuse box for guage.

@jeremyrobertson81 4 года назад

@@TheSmokeattack I ended up just using the egr signal wire instead, much cleaner and easier

@GoatRopeGarage 4 года назад

@@TheSmokeattack Should be in the manual

@dsmubz Месяц назад

This video is still helping people, thank you.

@brandonpylant9349 5 лет назад

If this guy keeps on he is going to make a fortune and help tons of people. Keep up the good work

@GoatRopeGarage 5 лет назад

Let's just start with helping tons of people!

@brandonpylant9349 5 лет назад

@@GoatRopeGarage and that's why you will go far my friend

@mkstewet2 5 лет назад

@@GoatRopeGarage Hey, good deeds should be rewarded ! ! ! !

@RotaryTurbo 4 года назад

I thought I needed the pro features of the MPVI2 to log my wideband originally, so this video just saved me $250! That's some fine help.

@rollandsaxton 4 года назад

@@RotaryTurbo so I'm new to tuning and just bought hptuner mpvi2 standard and I dont see some of the features that I hear others working with and thought i had to upgrade to pro. But after reading your post I think I just saved 250. Thanks

@wereexpertstoo3795 5 лет назад

I ran across this video a few days ago but didn't realize it was what I was looking for . . . after some more research about getting the a wideband into an MPVI2 someone linked back to this and I knew enough to know this is what I needed. And the new LC-1 I have in a box from years ago is going to work perfectly for this. Thanks for taking the time to explain - a huge help.

@markpollard500 3 года назад

Love the videos so much knowlege. But man slow down a bit. Got newbies following you. Specially when showing your setup. Some of use trying to copy this.

@RAWRMotorsports 2 года назад

Facts ¿ he blast through so fast gotta rewind it 10x's

@jelenekoutdoors9023 Год назад

Hope you and the family are doing well, thanks again, you da man!!!!

@QuigzDrifts 3 года назад

I've tuned on hondata before successfully but HPtuners is new to me and I'm trying to learn. Thanks much for your video, you have taught me a lot

@blairanthony3801 2 года назад

Dude, you’re awesome I finally got one of your process videos to work. You go so fast it’s hard to keep up. Thank you!!

@davidchmelik6592 5 лет назад

goat rope. think I found my issue. after tinkering with it for about an hour while watching this video I looked over my wiring and I believe when I crimped the connection I crimped it at the rubber insulation and didn't get any of the actual wire because after crimping it in different spots it now works. thank you for making this video

@davidchmelik6592 5 лет назад

now ive run into another issue. I followed ur video to the T and in my scanner the aem eq ratio is set to read in lambda but it shows afr. I went into transform and changed it to my aem 30-4110 and I cant get it to read in lambda therefore my "maf error" table we setup is reading crazy high numbers.

@GoatRopeGarage 5 лет назад

Make sure your gauge is set to lambda, the data from it will always match the gauge and will show up as such no matter what you select, you can select AFR on the scanner and it will still read lambda when the gauge is set to lambda. Let me know!

@davidw.thatmsdguy8952 4 года назад

Awesome! This was something I wish I knew before! Always had my wideband pinned to the pcm in place of the egr.

@shanemiller9307 5 лет назад

I wish you were my neighbor!!!!

@fasnuf 4 года назад

Even Mr. Rogers didn't have this good a neighbor!

@jimmiemiller4327 5 лет назад

Instant sub. I was wondering if I could log my AFR in HPT without spending more money. I have the same AEM gauge. I am going to buy all the same stuff you bought and hook it all in at the same time. Thank you so much for this.

@rockroll9513 4 года назад

Same question here! Do you need MPVI2 Pro or can you use the standard?

@asb2106 2 года назад

greatly appreciate the content! Got my setup going recently again with my 1 pro and i was using analog to tune, Seen more than one person talking about this, one watch and im ready to go!

@MarnellBalmeo 3 года назад

2021 here. Thank you for posting this

@OGChadney 2 года назад

you are the GOAT of tuning my friend.

@tombogershausen7067 4 года назад

You Sir are my latest new Hero, brilliant information here, thank you.

@GoatRopeGarage 4 года назад

Thanks for watching and subscribing!

@xwxwx7500 5 лет назад

I didn't know that was a thing, thanks for sharing.

@jonathanrobinson8176 4 года назад

How do you connect AEM X to the HP tuner mpvi2?

@NN072288 4 года назад

Instrumentation tech here. Preach about the "good enough" attitude.

@RAWRMotorsports 2 года назад

I log my AEM wideband through the EGR port and setup user maths .. free and easy

@curry10 2 года назад

I have my rs232 signal reporting on a program called putty but HP tuners refuses to grab it. The channel disappears no matter what I try. So frustrating! Hp tuners sent me a link to your video

@katlynnisabella544 6 месяцев назад

so what if you're trying to tune something with true dual exhaust? do you have to run two widebands or will the single wideband be accurate for whichever bank it is on?

@bartoszduzen7215 4 месяца назад

Works! Great merch !

@bretm4u2 Год назад

I am having problems seeing wide band. Innovate duel wide band. Comes with plug in adapter to serial. I can add channel to pid list, but when I click the record button it goes away. Stop recording and it comes back. Any ideas?

@tdg276 2 месяца назад

A problem I ran into is the drivers were not installed for my serial to USB adapter. make sure you have those drivers are installed and you shouldn’t have an issue.

@reborn74nova 5 лет назад

First thank you for this video. I want to make sure I understand one thing. Basically the OBD port connects to MPVI2 with OBD extension cable or MPVI2 connects directly to the OBD port. Then the MPVI2 unit has a USB cable that I would connect to the USB hub. The AEM 30-4110 has a connector with bare wires. I use that to make the RS-232 Serial Device cable and connect the serial to USB adapter to the USB hub. The same USB hub that the MPVI2 is connected to. Then I connect the USB Hub to the computer. Am I correct with the setup? (Basically Wideband and MPVI2 are connected together and sent to computer via a USB hub.)

@GoatRopeGarage 5 лет назад

Yep, nailed it!

@fasnuf 4 года назад

Thanks for asking this question, this is my exact situation. Any advice?

@dustinlewis4521 4 года назад

Thanks! Was wondering why the gauge did that in lambda... but who cares if there is an easy fix to this. Tuning a 98 Grand Prix GTP, using it as my learning platform.

@MichaelGedies 4 года назад

Awesome video. One question though, could you clarify which step causes the signal to disappear from the scanner, and why this happens?

@hassanabas1549 3 года назад

Did i understand this right So if I have a mpvi2 with an aem wideband x series with obd2 harness I plug my new serial port USB side to the laptop and my db9 to another female db9 and through both of them will be the power and ground wires from my wideband gauge which used to go into a cigarette lighter wiring from the tuning school and now I can tune 3rd Gen gm vehicles without buying a pro feature and a pro link right? But now since I replaced the ciggerate lighter wiring to this serial db9 serial ports where is my wideband getting power from laptop ?

@1987WE4 Год назад

I'm trying to wire prolink+ to a AEM x-series 30-0310 what wires get connected to each other I can't find any directions on this

@trumanbuckley8526 3 года назад

Someone please help me out. I take the blue wire from the harness and put it on terminal 2 and the black wire from the harness to terminal 5? Or do I ground the black wire and separate ground to terminal 5?

@bsfc9 4 года назад

My wideband has a usb output and I connected into my laptops usb a slot and it shows up as serial com 3 in device manager. Is this the same kind of connection less the rs232 to usb adapter? Will the scanner find the wideband if setup as outlined in the video?

@Cobra427Veight 4 года назад

Hi , I have an AEM 30-0300 X wideband gauge , I just want to be able to log the AFR is there a simple plug in data logger for this ,so can then download to my laptop ? can suggest as may as possible that will work with this gauge Cheers .

@GoatRopeGarage 4 года назад

Doesn't AEM offer a simple software logger for that for free? If have to double check as I only run it with HP Tuners

@Elcoboyz Год назад

Damn ive tried every type of serial connector and just can not get my hptuners to see AFR. as soon as i start scanning the channel just disappears..

@gusprovance4201 4 года назад

I have a 2001 c5 corvette and I'm trying to connect the aem x series 30-0300 to hp tuners mpvi2 but cannot figure it out. Would this set up work for my application? Any help would be much appreciated

@zachm9912 3 года назад

When pinning out the rs232 connector, do you only use the Black & Blue wires (ground & signal)? Are there additional wires that need to be pinned? I'm getting the disappearing AEM channel issue when I start to record. Tried everything you mention and more. Still can't get it to work.

@timvandyke5358 5 лет назад

Thank you for this video and the links subbed.

@CrimsonHawk09 4 года назад

Still not quite clear on the ground. I have the black and blue wires hooked to serial. Diagram shows a spliced ground of sorts to the battery. Do I just tap an extra long ground wire to the battery from the serial?

@GoatRopeGarage 4 года назад

No, any chassis ground will work

@richardi9696 2 месяца назад

Do I need the pro link cable to use the aem wideband 0300 with mpvi3 for the serial hookup for logging?

@dsmubz Месяц назад

No you don't, don't even waste your money on the Prolink. This will work fine via serial using this method.

@kimble005 2 года назад

Hello. Just found your channel and am loving your tutorials. Thank you. My question is, Would I need 2 wideband sensors and gauges if I am running true dual exhaust? I have speed engineer headers and each have an O2 bung to use for narrow band. Also, once done tuning, would i then replace widebands with narrow bands for cruising? Thanks in advance.

@Therace-qz8ik 5 лет назад

Somewhere i think I remember you stating that if you are taking your readings post CAT that the reading will be off by (0.5). I have recently hooked up an Aem wb and am using the serial method like you have outlined. And i have it reading from the tailpipe adapter tube and my reading at idle is 1.48 lambda. Is this what you were talking about? I was wondering if under transform where it says (input/10+0=output) could correct this by making the (0) a (-0.5) so that it read (input/10+ - .5 = output)??Is this how you would accurately correct for this ?

@kurtperdew5601 4 года назад

How do I wire into the 232 port? Should I buy a male 232 and lop the end off so I can splice into the appropriate wire from my gauge so I have something to plug into the adapter cable?

@waynesworld5657 2 года назад

Is this wideband & lambda tuning set up an ideal path for dialing in a gen III lq4 vs narrow band afr ? I have an OG mvpi looking to get my feet wet tuning my wife’s 01 denali.

@tnroyal3778 4 года назад

So if I want to tune in AFR would I still divide by 10 instead of 1...? Do I do the exact same settings also?

@christopherhubbard9490 4 года назад

Thanks for all the videos! I have a 2015 Sierra 5.3, and I just bought the MPVI2 and want to get started. I would like to use the tuner on my buddy?s truck as well, and so I am wondering if it is possible to only temporarily install the wideband in a factory O2 bung during logging and tuning. Then replace the factory sensor for normal use, I realize after every modification I would need to reinstall it to update the tune. I don't particularly want to get a bung welded on, and as I said I want to be able to tune other vehicles. If I go down this route, what steps would I need to take in order to tune? I'm assuming force Open Loop. Are there any SES/DTCs to disable? Do I leave the factory narrowband connected to its harness but loose, or should I remove it? Many thanks! Chris

@aleksmijakoski4281 4 года назад

To connect up my AEM x series 30-300 to my MPVI2 will I need the pro feature or just the pro link cable thanks.

@Eric-lf6yx 3 года назад

So does this mean I could have just the mpvi2 without the pro feature package and connect my innovate DLG-1 dual widebands via serial-to-usb into my laptop and add an external serial channel in vcm?

@justinridenour4277 4 года назад

Can you send me everything I need from the tuner standard or pro ? 5he whole parts list if possible this gets confusing with this one says this and another saying something else thanks in advance

@dinkplayer3238 5 лет назад

On a v8 with a long y pipe, do u need 2 wideband sensors, one for each side, or can u use just one where the pipe connects together about 4' down the pipe?

@GoatRopeGarage 5 лет назад

Just one, and you don't need to put it near the Y pipe, just keep it before any cats of you have them. It doesn't need exhaust flow from both banks, your changing fueling to the engine as a whole so either side is representative of the total AFR.

@j.finesseflights1403 2 года назад

Question, you speak about the noise coming from the power source can affect the gauge readings, would it be better if I powered it from a filtered 12v source like a pololu?

@israellujan8432 2 года назад

is there a way to run other gauges similar to the wideband using the serial input instead of using the analog on the side of the mpvi1

@michaelprochaska9755 4 года назад

Do you know a software that will log a serial input on Windows 10? The AEM Data Viewer/Serial monitor won't run on 10 and neither will Hyperterminal. This is so I can log AFR on engines without a PCM

@chrisbryant1657 3 года назад

I purchased the exact same WB O2 sensor you have. Will the setup your describing work with the original HPTuners version 2.2 that was discontinued a long time ago? My laptop os is windows 10 with usb 2 ports. 1998 z28 Camaro.

@theschultz-ster 3 года назад

If I use an o2 bung i already installed, replacing my narrow ban. Is there a way to wire from the gauge back to my Narrow band for the ECU to read it or is that not necessary

@GoatRopeGarage 3 года назад

Nope, we disable then during the tuning process

@will485948 3 года назад

It doesn't go away when I connect it goes away when I start logging do you have any ideas thank you

@GoatRopeGarage 3 года назад

Check your device manager and delete any other com ports besides the USB one

@chill_chewy 3 года назад

My serial port worked for a little bit, but then on my dyno day would only read 99.99 idk if my rs32 serial just gave out or what. So idk its driving me crazy

@Busa0069 3 года назад

Why does AFR only show only in tenths in serial mode when my gauge will show the hundredths decimal ? Is that why you tune in Lambda ?

@jozefhermanson6728 4 года назад

I'm normally very good about figuring stuff out like this but i'm at a loss. I have an innovate motorsports PSN-1. I used to be able to just use its included cable with a com port to usb adapter cable and log my data very easily. However that no longer works. so I bought the same DB9 connector here and hooked up the psn out signal to pin 2 and grounded pin 5 and nothing. Anyone have any ideas?

@dennisbrule9664 4 года назад

Just a quick question . WHY did you use the transform instead of the decimal add or subtract ?

@GoatRopeGarage 4 года назад

Decimal add or subtract just adds digits behind the decimal point

@13iker13oy 4 года назад

The two wires coming from the Wideband to the serial adapter. Does it matter where they go in the serial adapter?

@GoatRopeGarage 4 года назад

Yeah, it will be on pin 2 and 3, if it doesn't work try switching them

@13iker13oy 4 года назад

Cool thank you

@ASEWorldClassTech 5 месяцев назад

Repoll! Repoll! REPOLL!!!! Finally it doesn't disappear! lol!!!

@Cambo540 2 года назад

Hey man, got my AEM connected to rs232 to HP and the gauge and computer are reading different values. Gauge is reading rich at 13 and HP is reading 1.35 lambda. Any ideas? You been a huge help. Thanks.

@shakenfake 3 года назад

Hey Kyle quick question about my serial input. Whenever I begin scanning it disappears until I close the scanner out and reopen it. I do not have any other usb to serial com ports listed in device manager. Any ideas?

@shakenfake 3 года назад

I've seen a few different thoughts on how to try to get this to work so I will do some of the suggestions. I will see if I can get something working tonight possibly and update this on what I did.

@shakenfake 3 года назад

So I tried to just run the cable first, truck on, plug everything in and then turn on the laptop. Still nothing. Someone says I should switch to pin 3 which does not make sense to me.

@jpfiero 2 года назад

I have this same problem

@mohammadalshirawi3239 4 года назад

I have a custom wideband and I did what you did in this video and as soon as I start monitoring it is disappeared from the channel and the wideband have no value in the chart. I have checked the wide band it is working properly and downloaded and applicant to check if it was connected to the pc and it was connected so therefore there is no issue with the wiring and the connect. tried to reboot while the serial to usb pluged into laptop nothing happened.

@GoatRopeGarage 4 года назад

Which wideband are you using?

@ians2920 2 года назад

Awesome Videos, been binge watching them all day. Quick question……. Instead of using the RS-232 to USB interface cable. Could you not direct wire the AEM Blue wire directly to Pin#3 and the ground to Pin#4 of the USB cable and eliminate the male/female RS-232 connectors. I’m not and electronics expert but we just curious. Thanks

@_Simple. 2 года назад

i was wondering the same thing

@jpfiero 2 года назад

I believe this won't work because of the signal types.

@Go4BrokeOffroad 2 года назад

If you are deleting rear o2's, can you just take the power and signal return from one of those channels and data log it that way? I'm just getting started with mine.

@YZFoFittie 5 месяцев назад

I have an MPVI2 Pro with the Pro- Link. I am trying to hook up 2 AEM FAE 02's. Is it better to use the analog on the Pro-Link or the canbus option?

@dsmubz Месяц назад

Can bus is 10x better and more accurate.

@YZFoFittie Месяц назад

@dsmubz the problem is you can only hook up 1 canbus at a time. =(

@JeremyMichaelJordanDIY 3 года назад

Is a 12v positive needed? I’m guessing just hook to the red wire from cigarette lighter if so?

@leroyhart1368 9 месяцев назад

Is there an updated version for the MPVI3 by chance? Seems it is kind of done differently. On you advice I did pick up the AEM gauge for tuning my Suburban.

@lsxjunkie 5 лет назад

@GoatRopeGarage I have the pro version MPVI. With the 30-300 AEM just put the white wire to terminal 1 and brown(ground) to terminal 5. After that how do I find it in the scanner?

@GoatRopeGarage 5 лет назад

There are options for the analog in channels on the parameter list.

@brianborg 11 месяцев назад

I there a way to hook up the aem x series to log data to tuner pro ADX?

@chrisarriazola1592 4 года назад

My wide band still doesn’t work on mine, it shows up then disappears, I don’t know what to try next

@GoatRopeGarage 4 года назад

Remove any other comm ports other than your serial to USB adapter.

@cashlessracing 3 года назад

Where should I put the sensor. I have three spot on my long tube headers. Speed engineering the two front and one in the y pipe? Can I use the y pipe for a wideband and still get an accurate reading?

@GoatRopeGarage 3 года назад

Yep

@charleschatterley7947 3 года назад

New to the tuning world. Would I ever need 2 widebands? Or can all this be done with just the single wideband setup? If a single will do, is there a preference on which bank to put it on?

@mohammadalshirawi3239 4 года назад

Goat Rope Garage is there wideband that do not support serial ? And how would i know if it does support serial?

@user-nx5hi8il3b 11 месяцев назад

The information was very helpful. Would like to know how to add a wideband that is not in the list, specifically a Glow Shift 7 color 0 to 5 volt analog. Can not seam to find the info anywhere. Using the serial to USB port. Have the data sheet but do not know where to put it in the scanner

@nickspall4552 3 года назад

Can you use a 5 volt analogue out put with the mpvi2 using the rs232 serial adapter like you have done on the mpvi1?

@ryancrisp6786 2 года назад

It seems HP Tuners rolled back features in theor updates. I was able to log my AEM EQ without Pro features using the OBD input when I first bought it. I haven't tuned in a year and now the AEM disappears no matter what when I start logging.

@ryancrisp6786 2 года назад

Update: I figured out how to log an AEM OBD wideband WITHOUT pro features and it won't disappear during a log!

@krazyj512 Год назад

@@ryancrisp6786 I'm having the same issue

@joshdrobny93 5 лет назад

Is there a way to hook up a wideband so it reads through the ECU? Someone told me it's possible through the egr circuit(since my egr is deleted) but I haven't been able to find any solid info on that

@GoatRopeGarage 5 лет назад

Josh, the short answer is yes. The long answer gets a bit more complicated, it is often dependent on what ECU you have then what channels you have available. If the EGR circuit was an analog then you in theory should be able to wire the analog out from your wideband into that circuit, then you will need to do a conversion on the signal. The original device is generally going to be a 1-5v signal, like your wideband, but then your ECU scales it and that is what you see in the scanner. You then have to go into the scanner and alter that signal to scale to your wideband so effectively you are going to have to use math to switch it back to the 1-5v scale then use another equation to switch it to your AFR reading. I want to say a lot of people were using the AC pressure sensor input back a few years ago but I haven't looked into it for a long time. Your best bet is to dig into the forums for your vehicle and engine as the answer is going to vary based on platform. Good luck!

@rockroll9513 4 года назад

Where does the other end of the serial port go? Do you plug the USB side into your MPVI2? Are you using a WB gauge or is the WB connected to the serial port? Can't see anything in video to understand how to connect the WB?

@GoatRopeGarage 4 года назад

Connects to your tuning laptop

@natemcgowan5416 4 года назад

Just to be clear this allows you to data log your AFR without having to buy the pro version?

@GoatRopeGarage 4 года назад

Correct

@blairbarham6532 4 года назад

What do you do If you wideband is consistently off. I keep getting a reading in 1.4 area while commanding 1.00. No exhaust leaks and just had AEM warranty a new sensor with no change. It's in the y-pipe behind the bank 1 sensor 1 O2 with no cats. It's got to be in the Transform selector but I can't figure out what numbers to put in there. I have it now just like you did in you video witch gives me the 1.4 reading. It's a 30-0310 AEM with no gauge

@GoatRopeGarage 4 года назад

Check for leaks, if you are running consistently lean it indicates and exhaust leak.

@blairbarham6532 4 года назад

@@GoatRopeGarage Just in case somebody else comes across this problem. Somebody on the HP forum figured it out. The 30-0310 was just sending the raw data to the scanner. So under transform I divided it by (v)/ 14.65 + 0. On to MAF tuning thanks to Goat Rope!!!

@GoatRopeGarage 4 года назад

@@blairbarham6532 thanks for responding back!

@scottdaubert8648 2 года назад

@@blairbarham6532 Thanks heaps! I've been chasing an odd WB reading for way too long. This fixes everything!

@chrisbryant1657 3 года назад

I must have missed it. What make, model, and year is this WB O2 sensor installed in?

@j.finesseflights1403 2 года назад

I'm getting close to installing my 0300 to my lm7 shittyrado!

@TwinTurboRamAir Год назад

My fix to the wideband disappearing from channel list: I had all the cables plugged into the laptop and had the scanner open and ready, started the car, hit scan, the wideband stayed in the channels list and histogram started populating as it should. And I'm running Windows 7.

@NativeEngineering 2 месяца назад

So I've done this but the math is incorrect for some reason AFR scale it reads fine, but the conversion to lambda it's just AFR moved over a decimal because of the divide by 10 Anyone have the correct math to convert it from AFR to lambda?

@dsmubz Месяц назад

Do you have your wideband displaying Lambda?

@NativeEngineering Месяц назад

@@dsmubz I do, but that was not the issue. I figured it out. I had to take the input and divide it by 14.7 to display in AFR

@mohammadalshirawi3239 4 года назад

Hi, I have a question on the new mpvi2 device , so my setup is a gauge from (WB brand) hooked to lighter plug to give it power and hooked to O2 sensor and I customized a cable to connect the gauge to a serial port then from there i got a serial to usb adapter and then i plug the usb into my laptop or i get multi usb hub and connect it to the mpvi2 ? I am confused in the last part where do i plug the usb is it into the laptop or a usb hub with the mpvi2 ( which mean both of them in one hub )?

@GoatRopeGarage 4 года назад

Both to the laptop, if it's one of the supported serial wideband sensors the software will see it when you add it to the parameter list.

@mohammadalshirawi3239 4 года назад

Goat Rope Garage is there wideband that do not support serial ? And how would i know if it does support serial?

@darwinfridgeseals741 4 года назад

Hi Kyle, Thanks for this video, have just received my AEM 30-0300 X-Sereis Uego Gauge, my question is regarding the MVPI2 dongle. Do you think I will need to purchase the Pro link to run the AEM gauge, I will be installing the gauge as per this video. Thanks man.

@GoatRopeGarage 4 года назад

Nope, get the serial to USB stuff, save the money on the pro link

@darwinfridgeseals741 4 года назад

@@GoatRopeGarage Thanks so much for your quick reply, Have a great week end.

@michaeldcurry 4 года назад

@@darwinfridgeseals741 I bought the same gauge you mention above. Extended the blue wire to reach where I needed it to and then ran the ground for both the AFR and serial to the same point. Easy Peasy...

@vampirefreak1123 2 года назад

How would you hook up a lc2 wideband up with hptuners?

@ivancastillo7872 3 года назад

Disculpa no tienes los drivers o programa para poder vincularlos ?

@garageforcerestos Год назад

Hey, great video. Question for you - I am just looking for software to connect to my AEM Air/Fuel Sensor (30-0300) so I can log the AFR data to look at later. Nothing else would be connected. Any suggestions? Not sure I can use the HP tuner software as it wants to "connect to a vehicle" before you can add a new channel. thx

@proto-techllc Год назад

Just create a custom channel list in HP tuner to only show Wide Band information, if using a P01 gen 3 ecu use Pin 55 on blue connector to analog output + (white wire on AEM) and the brown wire on AEM goes to Analog output which is blue plug pin 40. You will need to add EGR sensor voltage in the channel list, create a new chart, and setup user math for that wide band to covert egr voltage to wideband afrs.

@mcbridemotorsports5788 2 года назад

Yup, Some how my Tuning Lap Top upgraded to Win11 now my Serial to USB no long reads my Wideband in the logs. Currently looking for a work around. EDIT: As a side note, I had zero issues before on Win10

@GoatRopeGarage 2 года назад

This seems to be a common problem, think it has to do with the serial drivers, see if you can update them

@mkstewet2 5 лет назад

I have the X series and want to use it on my 2000 Silverado, will HP Tuners log through the OBD2 as this is a non CAN bus vehicle? Thanks for any input.

@GoatRopeGarage 5 лет назад

No, you'll have to use serial or analog

@ScottPaille Год назад

I was curious on why you couldn’t just used a male usb connector and wire it that way instead of wiring up with db9

@gregrohrs404 Год назад

I’m wonder the same thing.

@Hotrod9882 4 года назад

Would I be able to hook my wideband up to mpvi2 with just the pro link cable or do I have to buy the pro link feature for $249.99

@ELRman86 4 года назад

Prolink cable doesn't do anything without the pro features set. If you buy the 3 items listed above its actually cheaper than the cable.

@darwinfridgeseals741 4 года назад

Please help, no matter what I do, I cant get the AEM 30-0300, to log on HO Tuners with the serial port, spend all day testing all the connections, everything tests good but when I start to log, the channel disappears. 2004 HSV LS2 E40. Matbe its just the wrong scanner for my ECU

@GoatRopeGarage 4 года назад

No, double check that your serial adapter is loading up right, might need to update the driver for it

@darwinfridgeseals741 4 года назад

@@GoatRopeGarage Thanks for your help, as usual it was operator error. I had the serial plug pinned as a male plug when it is a female plug.... Thanks Kyle.

@jragz_1759 6 месяцев назад

Mine is disappearing. Can anybody help?

@will485948 3 года назад

I did everything you said and it still goes away

@scubastevoo8404 4 года назад

i am using an LC-1 wideband and mine wont always show when i hit connect to vehicle. but i have had luck just hitting the record button instead. some how it has been working that way.

@GoatRopeGarage 4 года назад

I'll give it a shot next time!