Great video. I have a Pavilion x360 with a working touch screen and luckily no shattered glass, but the screen display has lines through it. What is my solution here? Is it as simple as getting a new LCD Display?
glad the replacement non genuine screen a student purchased included the brackets and double sided adhesive, was able to just remove it i guess its due to it being the touch screen version, just had to re-enable the touch screen in device manager once it booted and bam all working, glad its not like the newer machines that require heat guns to melt the glue
Why would you remove the new digitizer from the bezel it came with and glue it to the old one instead of just attaching the new digitizer and bezel assembly?
To keep money. Most likely the customer paid for the completed assembly and they saw it was reusable. So they used the one and kept that part to use it somewhere else, even if the customer paid full price.
@@dle632 and @Jose Monroy, Yes it is possible BUT you need to be very carefull when you seperate them. When you want to remove the LCD from the glass make the TAPE not glue (there is no glue used just tape) a little bit warm with a hair dryer just a little bit and the put a bankcard or something like that between the glass and the lcd. Just be carefull and slowly
How much does a replacement screen for a HP Envy x360 15 cost and where could I get it? It's a very small crack in the bottom bezel so I'm pondering not repairing it if it will not crack more and release glass shards.
No cracked screen here but my digitizer is reading mirrored. I'll touch at top left and it registers the cursor at the bottom left. Like it's inverted on a line through the middle of the screen
Thank you, Simon for your comment! The spare part is a full screen ( touch screen and LCD screen in just one piece) so i thing you have to replace the complete screen. Thank you for asking! Best regards
MovilOne Phone Repair I had the same question. I saw on eBay the screen replacement, but it said no touch screen. I’m not sure why there would be a non-touch screen replacement since I thought it was just one part together.
@@AlisonLinh I found an all in one and replace it OK. The touchscreen device fails every day or so at random now but if I disable and enable it it comes back on.
Wish my screen came out so easily. I broke it trying to get it out to fix the hinge. I was very careful but it was seriously hard to get the sides out. Something is holding it in like adhesive sheet?
Great video but, I don't understand why do you detach frame from the touchscreen and then stick it back??? It looks I have the same problem with HP x360 11-ab100nf (it looks exactly like on the movie): display work but touchscreen is broken. Is it separated from LCD screen in this model like on this movie? Can it be bought separately? I have a big problem to find it on the web just with the HP model number.
I broke the front glass of a pavilion x 360 15-br001ng. lcd touch screen has no signs of breakage but it does not work ... can I buy only the glass and do the same operation? Thank's
Hello, Andrea 1095! If the lcd working( transmits image,) you can change only the touch screen. Thank you for asking! If you decided to repair it and if you have any question I ll be glad yo answer it! Best regards
@@MovilonePhoneRepair hello i had broke the glass and not screen. Can you please help how can i order the screen(glass) so that i can repair it. Thank you
so quick question, I accidentally pressed on my screen too hard ( i was trying to glue it, since it was lifting) it was not cracked and touchscreen was working fine. However, after I glued it and pressed to much pressure, i cracracked the screen from the top ( next to the camera, but the camera still works) the crack is mainly on the top but it did make 2 split cracks which are not rough( the one on top has the rough pieces) , the laptop still works except now its only touch screen from like an inch at the bottom. My question is where did you find this screen? can you post their website, I can't find any for the x360 spectre 13in( i bought this laptop in 2009 if that helps) anyways 1) SHOULD I JUST FIX THE SCREEN LIKE YOU DID AND HOPE THE TOUCHSCREEN WORKS AGAIN? 2) WOULD I HAVE TO PURCHASE THE TOUCHSCREEN CONNECTOR AS WELL? 3) WOULD I ALSO HAVE TO BUY A NEW LCD DISPLAY? I JUST WANT MY TOUCHSCREEN TO BE WORKING, I called several places around and even hp and I can't get anyone to fix it. I'm okay with doing it myself, I just need a website, and make sure I purchase the right stuff. Hopefully you can help with that. You will definitely gain a subscriber
Can you specify the price and everything. The link doesn't work anymore actually. If you could replace the link again, that'd be really helpful. Thank you
Which is the exact model of this X360. I have a HP PAVILION X360 14M-BA011DX I need to do a screen replacement on. I am trying to see, in advance, if this is doable or too difficult or impossible.
Hello...the glass of my ho x360 convertible laptop broke...and it is taking touches itself. .But the display is working fine....how can I change the upper glass?
@@veenagill7792 Initially I turned off the touch screen ...after some time, the touch screen started working properly....The upper glass is still broken but I am not having any problem so I didn't change...
Hi! My X360 got soaked in makeup remover during travel and the emulsion managed to seep into the screen. The display is manageable but the touch seems to be messed up. Should I get the display changed or is there something I can do to fix it by myself?
The having the touch screen isn't that important to you and you want to dish out the money right now you can just disable the touch screen... Just disable the drivers in device manager.. If u really need it then yea ur gonna have to change the entire thing
@@akashsen357 I'm not worried about the touch, but the liquid is interfering with the responses i.e the system is getting confused between the touch screen's responses and the mousepad's. I'll try the hack mentioned above though. Thanks man.✌🏽
@@shivanib6551 yea my spectre screen got shattered... Everything else was still working but the touch interfered with everything so this worked perfectly for me.
Hey i replaced the screen on my 13" x360 but after replacing the screen the display is inverted now.. would you happen to know what could be causing that?
Subha, you can look for it on Ebay or Aliexpress ( for the spare part) and for an place to work it for you...don t know, you can look on internet in your area...Wish you good luck and Thank you for watching!
@@MovilonePhoneRepair wow!, que bien, acá en México, no podrían pagar tanto dinero, ejemplo: acabo de reparar una TV Samsung 4k 50" que viene mal trabajada de otro taller, mi mano de obra es aprox. $20 dls. y refacciones $100.00 dls. creo es barato, pero apenas el cliente aceptó la reparación, pues todo les parece caro que bueno que ustedes ganan bien, felicidades!
Hello, Alberto! You should look to replace it with the same spare parts,there is no compatibility between one and the other, it has to be the same! Thank you for asking and don t worry about your english! I m not such a good speaking, too! Have a nice day!
Yash Saini, i don t know! But you can look on internet with the correct model number and i m sure you ll gone find it :) Best regards and thank you for asking!
Hello! You need to disassemble yours, and look behind to see the exact model number, so as not to make a mistake in ordering the spare part.Thank you for asking! Best regards
HP has a spare part list on it's site. You have to find the support page of your model and find the help and troubleshooting link. They usually have it each series and models.
Hello, Nicole! If you are from Spain, please contact us by the form contact on our web site www.movilone.es o by phone at: 958.179.492; If not...:( you should look for it on eBay o Aliexpres. Have a nice day www.movilone.es
