Huma Air High Flow Dual Hole Transfer Port Overview 

Yes I know at the moment they only sell the impact probe , I think they are planning to make them for the Dreamline and crown aswel. For my video I modified my original probe of the Dreamline to match the dual hole opening

Airbuks thank you. :) I was going to order a prob but now not for my dream tac but for my impact mk2 this time a set again thank you. 👍🏼

The recently ( with the release of the video ) made a kit from it or you can also buy the probe separately. Before there was only the transferport no probe . Did you buy it straight from Huma

Airbuks yes I did.

Depends when you bought it ? With the release of this video they offer them now in a kit or separately. At the moment the probes are only for the FX Impact , for the Dreamline I modified it myself to match the opening of the TP

🤔 that should not be the case , it’s possible that you have only a small increase but decrease shouldn’t be the case . It is mandatory to retune your gun to get the most out of the setup

If you hear it long enough you should be able to do it with some basic tools like pliers

Will give it ago... Thanks!

You have power restrictions I believe no ? Maybe the only way you can benefit from is lower reg pressure and maintain the same speed and therefore increase shotcount . 🤔

What it does is make you jealous.

The TP will fit the barrel , the probe you will have to modify yourself I think

It will help , you need less regulator pressure to push heavy pellets and slugs . If you plan on shooting 16grain jsb you can do without

@@Airbuks forgot to mention I am shooting 25cal

headcracker SilentSniper for a .25 cal with jsb 34 grain mkii I would install it . I have it on my .25 pellet barrel 😉

Airbuks what is the max fps you can can get out of the 34 grain, btw are you using the mk2 power plenum. Thanks

​@@miga2622 i never went to the max but i can easily get 1050fps .22 34 gr ( yes MKII and power plenum )

Yes offcours, but this was released before FX putted it standard on there barrels

@@Airbuks i bought a fx dreamline in .25 from krale in the netherlands a few weeks ago, do you know if my fx dreamline barrel also has a pellet AND a slug transfer port?

@@kickassvideos5469 it should come with in one side the pellet port and on the other side with the slug port

@@Airbuks thank you for you answer, i figured out that if i take out the magazine and look towards the end of the transferport (the brass part), i saw 2x small holes, one on top and one below on the back side of the transferport, and those hole are the guidance to reasamble your barrel correctly so the airflow holes line up. and if you have 2x of those guidance holes you know without taking the barrel out if you have 2x ports or not.

@@kickassvideos5469 that is 100% correct 👍

Indeed , that video is also already old and the evolution of the dual transferport has been huge 😉👍🏻

@@Airbuks However i wonder if they have to be as huge like the new ones from huma. Anyway i just installed them both on my .22 and .25 just to be sure ! ;-) I'm still looking for some extra power maybe by shortening the valverod or the valve adjuster spring... Or more heavy hammer but that is last option.

Vi un tutorial donde solo incrementa 20 fps y subiendo 10 bares el regulador 50 fps,.. como dices no vale la pena..

Seems like it’s all working fine as so many have adopted this 🤷‍♂️

Hi john , I am sorry you have such a unpleasant experience with this Huma transferport . By me everything works perfect . I am sure there must be a explanation for this knowing Huma and the kind of detail they put in to there products . Contact me at Facebook messenger or instagram chat and see if we can’t sort this out for you

You are supposed to adjust the barrel slightly and maybe not slide it in all the way to make sure your magazine slides in properly BEFORE tightening the barrel grub screw. It even says so on their website listing this item, it will work properly if you install it properly :)