Hurric Rac1 Slip On FITTED to Versys 650

Подписаться 42 тыс.

Просмотров 40 тыс.

50% 1

It finally happened! I got a new endcan for my tame sounding Versys 650! It's a Hurric RAC 1, which I'd not seen before I moved to Germany. They cost around €300 and naturally I have the version with a Catalytic converter, otherwise it wouldn't be street legal on my bike over here.
I picked mine up from ebay, because I#m a dirty pauper, but here is a link to the same silencer on the Louis website: www.louis.de/en/artikel/hurri...
So anyhow, here's a little video of me in the garage wrestling my old stock end can off, and squeezing the lovely new one on!
Enjoy!
--------------------------------
Say hi on Twitter: @Andymancam
--------------------------------
Support me on Patreon: / andymancam
[[------ NEW AMC STICKERS! -----]]
Black Camera: bit.ly/AMCamblk
White Camera: bit.ly/AMCamwte
Black Mount Yin: bit.ly/AMCmntyinblk
Black Mount Yang: bit.ly/AMCmntyangblk
White Mount Yin: bit.ly/AMCmntyinwte
White Mount Yang: bit.ly/AMCmntyangwte
Black Set: bit.ly/AMCsetblk
White Set: bit.ly/AMCsetwte
FULL SET: bit.ly/AMCfullset
I am a participant in the in the Amazon EU Associates Programme & Amazon Services LLC Associates, an affiliate advertising programme designed to provide a means for sites to earn advertising fees by advertising and linking to linking to Amazon.co.uk & Amazon.com
Love, Andy!
--------------------------------
Andy Man Cam Stickers!!
£1.75 for 6 Shiny new stickers delivered to your door!
www.paypal.com/cgi-bin/webscr...

Развлечения

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 175

@aaronweigl964 7 лет назад

Just commenting to let you know your videos are superb! Great mix of information and humour.

@AndyManCam 7 лет назад

Thank you most kindly Aaron! Then I'm hitting the mark I'm aiming for! :D

@Fr3ubel 7 лет назад

Jayyyy finally the video we all have been waiting for - the giant muffler !! Great video Andy :)

@AndyManCam 7 лет назад

Whooo Hooo! WARRRP! High 5!

@maurits1969 6 лет назад

I've seen comedians way less funny than you mate. That was by far the most entertaining and funny DIY motovid out there. I'm a fan!

@AndyManCam 6 лет назад

Cheers mate! Just hope I can keep it up now!

@Gee_w_photo 7 лет назад

This brings back memories! Nearly stabbed my SV when replacing the 13 yr old stock system! Broken clamps, seized joints and broken captive nuts...I had to leave it in pieces and start again the next day or I'd have torched it! Good work Andy!

@AndyManCam 7 лет назад

+CPTN Blackbeard Hahaha! I know that feeling! I blame working on cars and bikes entirely for my monk-like patience!

@RiderontheStorm1992 7 лет назад

Congratz with a beautifull sounding bike!

@AndyManCam 7 лет назад

Cheers mate! I'm well chuffed. Can't wait to show you how it sounds in an alpine pass!!

@87Slabside 7 лет назад

Great edit and exhaust. Loved it on my CBR900RR.

@AndyManCam 7 лет назад

Cheers mate. It's even better considering how cheap it is!

@motodevcam 7 лет назад

Great video! ha ha full throught!! You've also given me a new cracking new word to use at work in the workshop...Asylum will be used forever.

@AndyManCam 7 лет назад

Glad to hear it!

@motodevcam 7 лет назад

Andy Man Cam hmmm so just saw how the word throat is spelled!!! Let's blame it totally on predictive text!!!

@CookosRider 7 лет назад

Good work man, nice exhaust.

@AndyManCam 7 лет назад

Cheers mate. About bleeding time!

@elrayox8932 7 лет назад

I liked that your right glove acted as a gauge of your struggle.

@AndyManCam 7 лет назад

HAHA! Those gloves were the windows to my will to carry on!

@HarryL2020 7 лет назад

Andy Man Cam Heating it up will make the metal expand, try putting cold water or some ice cubes on it.

@REPORODGE 7 лет назад

Can you show us how to ballance the boddies on thease

@bronsinterieur 7 лет назад

Hey Andyman! Just installed an Hurric Rac1 exhaust on my Versys 650 (2009) the sound difference is crazy! On your video it is kinda hard to hear the real difference... but in real life it sounds brutal! Your video helped me very much.. greetings from holland

@AndyManCam 7 лет назад

+Peter c I know right! I thought that as soon as i started editing this tour. It's louder, but not nearly a true representation! Thanks mate!

@AndyManCam 7 лет назад

+Peter c I know right! I thought that as soon as i started editing this tour. It's louder, but not nearly a true representation! Thanks mate!

@c0r0istian 3 года назад

Hey man, ik zit te kijken om zelfde te doen bij mijn versys, kan je mij je ervaringen vertellen? Ik kom zelf uit Amersfoort

@bronsinterieur 3 года назад

@@c0r0istian Hey kerel wat grappig man is alweer tijdje terug dit... Ik heb die versys niet meer rijd nu een supermotard. Maar mocht je twijfelen over die uitlaat.. niet nodig. Echt voor een zeer goede prijs een beest van een uitlaat. Hou wel rekening met het feit dat hij echt hard klinkt zelfs met de demper erin. Ik kan hem wel aanraden voor een versys, maakt hem net even wat stoerder. Groetjes

@gattigatozza Год назад

Thank you for this video! I just changed exhaust on my Versys 650. Had similar problems with that 22mm lambda. But, after this video i was ready for that :D Had to remove it together with exhaust pipes from engine, it was easier that way for me.

@klouism1 7 лет назад

Oh yes...............it sounds much better. Thanks for the video. Keep having fun.

@AndyManCam 7 лет назад

It really does, doesn't it! Cheers!

@Viper6-MotoVlogger 7 лет назад

That was a total pain in the butt, and I've seen vehicles with smaller silencers. That bike now sounds awesome mate.

@AndyManCam 7 лет назад

I know right! That stock box was a beast! In the US, there are a bunch of folks who have actually taken a silencer off of some car or other and put it onto their Versys/Ninja for better airflow!

@TheCrazymook 7 лет назад

I do not own a Verseys let alone a Kawasaki, or intend on getting one but your videos are funny AF so always worth watching :D

@AndyManCam 7 лет назад

Thanks Mook!

@grantpowers3807 7 лет назад

Sounds great!

@AndyManCam 7 лет назад

It really does! And obviously it sounds even better in the flesh!

@Mil-Keeway 6 лет назад

Thanks for the video, it convinced me to buy a RAC1 for my 2nd gen Versys (2010) too. The install went a lot smoother than yours, partially thanks to your video and partially since the OEM was pretty clean, though the lambda sensor was similarly hard to loosen... It sounds vicious, thumping it under ~3K rpm makes it sound like a KTM LC4 or KLR single, and it backfires a lot when it's cold or engine breaking/coming off high revs. It's definitely way too loud for the city (Vienna), as people turn around everywhere with that "WTF is that" look on their faces haha. I haven't been stopped by the cops yet luckily!

@AndyManCam 6 лет назад

Yeah i really miss that thump! Have fun with your new pipes mate!

@freekvanetten2513 3 года назад

Very recognizable. Oh I'll do that before the ride, max 5 minutes. Than once bussy I remember Black Hawk Down: "Nothing takes 5 minutes".... Thx for the Gear Indicator upload btw. Bought it last weekend, we'll see how it goes. Expect it will take 5 minutes :-)

@AndyManCam 3 года назад

It’s always the way, isn’t it?! Seems the machines like to keep us busy!

@Ben10twentytwo 7 лет назад

Wow! I found the first 8 minutes as stressful viewing as the first episode of the new season of the walking dead! Your definitely a better man than me, I would of spazzed out and trashed my garage.

@AndyManCam 7 лет назад

Ha! Sorry for the stress mate! Luckily I've above average levels of patience! Plus the garage was messy enough already!

@Dazof 7 лет назад

Hey Andy, nice pipe, I've still got the factory pipe on my BM, hopefully will be joining the club soon, bet your bike runs a bit better now too.

@AndyManCam 7 лет назад

+Daz of 1972 Certainly seems to be breathing a little better! Though that could just be because it's always singing now!

@ralfsdad669 7 лет назад

Install almost in the style of the great Ichiban Moto! Good job!

@AndyManCam 7 лет назад

+Ralf's Dad Ha! I'll take that as high praise! Cheers!

@christianweller4288 7 лет назад

With any threaded components that go through large changes in temperate, always worth using a bit of Copaslip on reassembly. Time saver.

@AndyManCam 7 лет назад

Good shout. Next time! ;D

@CenturionNL 7 лет назад

Same bike, same exhaust :D. Looks like Im seeing a recording of my own install. Same problems getting the old thing off, getting the lambda sensor out of it.

@AndyManCam 7 лет назад

Deja-Versys!!

@eld2349 7 лет назад

Hey ACM, kinda off topic, but what side cases are you using, and do you have an install video?

@AndyManCam 7 лет назад

Hi Eulus! I have Hepco & Becker Xplorer Cases. The smaller of the 2 sizes available. Sadly no install video, but I think enough people have asked, that I might actually take them off and do one!

@dcardenas171 7 лет назад

AMC, take the baffle out sounds much better, and at highway speeds it's not as loud but in the city where it matters is music to the ears nice video.

@AndyManCam 7 лет назад

Cheer mate. To be completely honest, the baffle in/out is not super different. I've since found out that there are 2 different baffles for this pipe. One is long and restrictive, the other is short and the bare minimum of bafflage. Luckily I have the latter! So even with it in, it's still far from muted!

@NagatoPainYahiko 5 лет назад

Great video buddy. Right now in the struggle of it with my ER6n 09. Wish me luck & keep it up. Where are you located in germany? Grüße ;)

@AndyManCam 5 лет назад

Thanks Turag! Good luck with those super stiff bolts! Enjoy the New soundtrack!

@heinz003 4 года назад

Hello. How was it running? Did you do something with fueling?

@AndyManCam 4 года назад

It was running fine. Seems the ECU took up the slack with the slightly increased Air flow. Though i had a standard Air filter, so not too much difference really. It’s possible that the slight richening at the low end from the boosterplug helped too.

@kraftybeard4272 7 лет назад

That sounds better! Good to see all your hardwork payed off :) The exhaust looks good tucked away under the bike, but Kawasaki weren't being kind to anyone who has to work on it, turned it into a lovely crud magnet! If you find it does leak just smear a little heat resistant silicone inside the joint, worked wonders on my bike, super cheap and I now have a hand tube full for when ever I need to take it apart. Have you thought about getting stainless headers?

@AndyManCam 7 лет назад

Cheers! It definitely looks tidier now, if even a little bit empty on the one side! Seems to be such a tight fit that all the puff is going out the back. Would you believe that they ARE stainless headers! But near the join underneath they're just so covered in crap that they look like mild steel. At the block, they're gold and shiny!

@kraftybeard4272 7 лет назад

Haha wow they are very well disguised! Can't wait to hear her un-corked :D

@AndyManCam 7 лет назад

+Krafty Beard best disguise in the business. Caked in cack!

@TheSpectre223 7 лет назад

I don't know which was longer, the wait to get the pipe, or the time to fit it. Sounds good though, seems worth it

@AndyManCam 7 лет назад

About the same I think. At least that's how it felt!!

@ridethestorm6690 4 года назад

Do you by chance remember where you got that seat pad

@AndyManCam 4 года назад

I got it from M&P in the UK, about 15 years ago!!

@jonathaneddy 7 лет назад

I have the SP Engineering racing stubby on my 2011 Mk2 and I can't wait to see the ride past on this. I reckon this is a belter. The SP is just too anti-social.

@AndyManCam 7 лет назад

Bugger, I forgot to do a Ride By! That'll have to come a little later! With the baffle, this is loud, but I don't feel like I'm being antisocial. Perfect balance!

@mishimposble 3 года назад

You can really clean up your header pipes using some green scrub pads and WD-40. Mine look better than new now.

@AndyManCam 3 года назад

I tend to use Autosol. Magical stuff.

@behcetsepetcioglu7639 7 лет назад

Very good.

@AndyManCam 7 лет назад

Thanks!

@Techathy 7 лет назад

Lambda sensor? Time for a decent 750mm 1/2" drive breaker bar & a 6 sided crow's foot. Any penetrating fluid needs to go on about 6-12 hours before the job starts.

@AndyManCam 7 лет назад

I know, I put it on the night before, but still no joy! Though the threads were in a terrible state, so I think they were more welded together than seized! A breaker bar is on my list for Santa.

@CaptainK007 7 лет назад

Top tip, tiger grip gloves on eBay lot better than those gynaecological blue shizzles. As you say you never see the struggle in them there tutorial vids.... nice Vid.

@AndyManCam 7 лет назад

Thanks Steve. I'lll check them out. You can clearly see the struggle in my videos through the medium of disintegrating gloves!!

@KarlTheDingbat 7 лет назад

I think it sounded better with the old exhaust on, and I never tell a lie!

@AndyManCam 7 лет назад

+Karl the Dingbat Ha! You can have it if you want! ;) I'm definitely preferring the blarrty new voice box!

@Etch_A_Fletch_ 4 года назад

Love the texas sticker!

@AndyManCam 4 года назад

Me too!! Courtesy of @RedShoesMoment 👍🏻

@HuskyRides 7 лет назад

22 degrees out and mister decides to go f*ck around with a lambda sensor instead of riding. Heh.

@AndyManCam 7 лет назад

28 degrees! But it was sadly my only available moment to fit the pipe before heading to Italy to BLARRT it about in the Alps!

@mickeypopa 4 года назад

You do realize that thin latex gloves ripped to shreds actually serve no purpose? lol Top video mate, loved the humor as always. :)

@AndyManCam 4 года назад

Ha! It’s the thought that counts!! 😅

@carl6551 7 лет назад

A bit of sweat and a big hammer.. That's how you do it lol..nice job 👍

@AndyManCam 7 лет назад

+Carl Getley That's the makings of a good night in! 😂

@EinkOLED 7 лет назад

I think I'll keep the standard exhaust on my versus.

@AndyManCam 7 лет назад

It's not an awful sound. Better than the sewing machine noise that the Fazer made!

@brrraaaapp8502 7 лет назад

that was quite a workout!......"get off my bike!" LOL

@AndyManCam 7 лет назад

It was knackering! I honestly thought it was going to be an easy and quick job. As ever!

@brrraaaapp8502 7 лет назад

There is a very good reason why the hammer was invented ! :-) Btw how has the Scottoiler performed? Thinking of installing one on my bike.

@400chevlc 7 лет назад

best ever bike video hahaha

@AndyManCam 7 лет назад

HA! I'll take your word for it, but THANKS!! Tho anything with a warrrpy can is good!

@NickMrbadgerMartin 7 лет назад

love the tec terminology lol

@AndyManCam 7 лет назад

+Mrbadger “MrBadger” Martin 60% of the time, Every video is 105% technically accurate.

@boellie2002 7 лет назад

What I don't understand is, how legal are aftermarket exhausts? Will you still pass the TÜV?

@AndyManCam 7 лет назад

+boellie2002 They're legal if they've been tested for your bike. Also has to have an E mark, though you can't have one without the other! This one comes with a certificate saying it meets legal requirements to be used on my bike. An 'Algemeines Betriebs Erlaubnis' or ABE. Also if the bike originally had a CAT, the aftermarket pipe must have one too.

@boellie2002 7 лет назад

Andy Man Cam Thank you for the explanation.

@RidingTusCanY 7 лет назад

AHAHAHA I enjoyed a lot watching your video and I was laughing as I went through the same path... on my bike I even had to loose the headers otherwise the can couldn't go through as too close to the rear tire (I mounted an Arrow can)... yes it's true on the video tutorials they make it easy, I think they do it twice ;) So they show only the 2nd attempt avoiding all the mess they went through, but your video is much more funny :))))

@AndyManCam 7 лет назад

Loosen the headers!! What a nightmare! Thanks for sitting through all of the suffering! It's always real with me! :D

@foodieontour 7 лет назад

Love your commenting. The best of all motovloggers I think. I could watch you commenting a garden gnome battle about limepie. Keep on doing that on every front!!! I enjoy your videos a lot. (and btw any sexual innuendo is always fitting and what comes to mind naturally... in my humble and probably perverted opinion)

@AndyManCam 7 лет назад

Wowzers, I'm blushing! :D Thanks most very much! I guess innuendo is just what comes naturally... Ooh er.....

@Mtthwpez 7 лет назад

Loved the transition into the porn soft focus, only to be teased by your right ( then left) glove slowly showing more skin! Great video, as always!

@AndyManCam 7 лет назад

I forgot to put the Bowchickawowow music on too! Next time...

@Fjdy1jd1 7 лет назад

If I ever had any urge to mess with the exhaust of my Versys, it was gone by the time I got done watching Andy's struggle.

@AndyManCam 7 лет назад

+Fjdy1jd1 Haha! So I've created an anti-motivational video! Oops!

@lanceflanagan 7 лет назад

my o2 sensor came loose quite easily but I'm getting in a rage trying to work the silencer off the pipe!

@AndyManCam 7 лет назад

There always has to be some kind of roadblock! Otherwise life would be too easy! Hope you sorted it by now!

@lanceflanagan 7 лет назад

Andy Man Cam Yup, it's off and a shiney new Black Widow is in its place. I just hope it's not too obnoxious!

@fibroboy1604 7 лет назад

Gloves????? Oh dear oh dear. Great as always mate.

@AndyManCam 7 лет назад

Those brave gloves gave their lives for this sound! Though they gave it up pretty easily!!

@fibroboy1604 7 лет назад

Andy Man Cam I'm more of a swarfega after the fact kinda guy. Even following bike maintenance.

@smokeybarr 7 лет назад

7:44 "I am 'exhausted' ..." Surely that was too obvious to be unintended :)

@AndyManCam 7 лет назад

Um... would you think less of me if I said I actually didn't notice?! :D

@smokeybarr 7 лет назад

Never. But gobsmacked the king of quips missed it!!

@christianweller4288 7 лет назад

He was probably too "tyred" to notice. :D

@AndyManCam 7 лет назад

Boom-tish!

@AndyManCam 7 лет назад

I'm don't know how I missed it. I'm baffled.

@subtlegroove9867 7 лет назад

Another AMC gold.

@AndyManCam 7 лет назад

Cheers SG

@disekjoumoer 6 лет назад

That's actually what he should call his channel: AMC Gold

@kiwibadger7826 7 лет назад

I got a sweat up just watching you.

@AndyManCam 7 лет назад

+KiwiBadger Was it the soft focus or the steadily disintegrating gloves that got you hot under the collar? !

@kiwibadger7826 7 лет назад

all of the above, add in the bolts that didn't want to move

@zinhar 7 лет назад

wish I watched this 2 weeks ago bc I faced the same problems with my versys

@AndyManCam 7 лет назад

Haha! Oh dear! I hear that this kind of struggle is character building... or something!

@jonathon646 7 лет назад

Sounds to me like you're trying to make a remix out of all the taps on different parts 😂

@AndyManCam 7 лет назад

That'll be the special edition version!

@jeffmitchell9214 7 лет назад

Have you ever heard of "Anti- Seize" lubricant for those spark plugs, and O2 sensors? Or for any steel bolt inserted into any aluminum fitting? Massively needed in the UK. Always wet and everything rots. Ever watch Wheeler Dealers? The rot sets in quickly over there. No offense. We use it here in the US but we don't have the rust problems as soon as you guys do. Love your Vlogs though. You speak clearly which is rare.

@AndyManCam 7 лет назад

+Julia Marshall Julia, if i could go back in time and tell the original owner of the bike to stock some copper grease here and there, trust me i would! Or maybe I'd use the time machine for the good of man kind? Maybe I'd just go back and get the lottery numbers so i can pay somebody else to deal with my rusty nuts! :D Thanks for watching! I'm glad the others mumble and make me look good!

@inthenameofjustice8811 7 лет назад

Sounds good enough to bonk. Ooo errrr

@AndyManCam 7 лет назад

I have to say I agree! Though I won't try it. Being shorter, it gets a fair bit warmer than the old bucket silencer!

@neeekneek 7 лет назад

hahahahah,"get offffff myyyy bike!!!!" :D

@AndyManCam 7 лет назад

If in doubt, shout at the inanimate object!!

@DeathsStalkerRVT 7 лет назад

Too funny. I've been there many times. If you have some place that sells Indoor/outdoor carpet (looks like astro turf) get yourself a 1M x 2M runner and use it in your garage when you have to work on your bike. It let your stay comfortable while your fighting poor instructions and rusted bolts ;-)

@AndyManCam 7 лет назад

Good shout! Or I could nick the Missus's yoga mat next time...

@DeathsStalkerRVT 7 лет назад

"Or I could nick the Missus's yoga mat next time.." were the last words spoken just before he went missing.... lmao

@Herzankerkreuz67 7 лет назад

I am out of words Andy ........ You really didn't start it up with just the headers.....😭 What an opportunity has passed.......

@AndyManCam 7 лет назад

+andree hammerschmidt You're so very right! I'm ashamed of myself. 😶

@naushad911 7 лет назад

Was thinking the same thing...

@AndyManCam 7 лет назад

andree hammerschmidt i know, i know. next time, i promise!

@northernninjarunner5506 5 лет назад

Was the previous owner Mr I Hulk? #itsajesusnut

@AndyManCam 5 лет назад

I think so. Either that or he sprayed it with threadlock and then a light glaze of salt water and cement dust!

@RevvedUpBiker 7 лет назад

Difficult nuts, I would heat them with a blow-torch, as long as it's not a nut holding your petrol tank to the bike.

@AndyManCam 7 лет назад

Haha! Solid advice! I really should get myself a blowtorch, seeing as how I always seem to get the stiff nuts. oo-er...

@RevvedUpBiker 7 лет назад

lol It's the cold weather.

@northernninjarunner5506 5 лет назад

You missed the firing the bike up with no exhaust 😈

@AndyManCam 5 лет назад

Yeah I know. Schoolboy error. I won't make that mistake again, I promise!

@NickMasseyRideon 7 лет назад

lol 9:30 so true

@NickMasseyRideon 7 лет назад

I didnt need a gasket on any of our bikes we did exhausts for

@AndyManCam 7 лет назад

+Nick Massey I much prefer the idea of gasket free. Far less faff, and easier to remove and refit should it be required.

@NickMasseyRideon 7 лет назад

thats exactly what happened to us, yoshi collapsed inside, got it fixed and slipped it back on, easy peasy

@johnnygross4415 5 лет назад

not complete unless you have some bailing wire.

@AndyManCam 5 лет назад

Cos it sounds like a tractor?

@muffinhandsactual 7 лет назад

Dem forearms

@AndyManCam 7 лет назад

...cos I eats me spinach...

@volgnit 7 лет назад

Yeah. Just remove the old one and the new will slide on. Easy. See. No problem.

@AndyManCam 7 лет назад

Naive. We're always so Naive!

@oklahomahank2378 7 лет назад

Kroil is better than WD 40 for loosening stuff. WD is basically a water replaced.

@oklahomahank2378 7 лет назад

Replacer

@oklahomahank2378 7 лет назад

Argh! Do not use your socket as a breaker. Use a pipe or go buy a breaker bar.

@AndyManCam 7 лет назад

+Oklahoma Hank Sadly what I used was what I have. Breaker bar is on the list for santa though! Not heard of Kroil before. Will have to check it out. I've heard that a rag soaked in diesel wrapped around the offending article for 12 hours is very effective too.

@gmctech 6 лет назад

LoL. Wd40.... Tehehe. May as well of peed on it... would have done more than WD40 could do.... none the less though thanks for your vids! always entertaining and great reference material

@AndyManCam 6 лет назад

+gmctech You're of course absolutely right. But it was all I had! And I'd already been to the small room before I started the swap! 😉

@ninjanelly3506 7 лет назад

Copper slip,copper slip,copper slip is what you need to put it back together Andy.Because there will be a time when you need to remove the exhaust again👍🏻When you get a bolt or nut to move,spray it with WD40 and wind it back in again eventually you will get it off.....if.....it doesn't snap!🙄 Nothing snapped so it's a result👍🏻😎

@AndyManCam 7 лет назад

+ninjanelly350 You're so very right. Though it's typical that when you don't care if it breaks, then it doesn't!!!

@mattwainwright7179 7 лет назад

hahaha great job matey ...always love ur videos ...I just modded my bike exhaust too ...so I know the struggle. ..really deep and throatie now ...just how I like it ...dayumm ...u got me doing it now hahaha Xx I posted it on RU-vid .check my lame page but be honoured for a like or comment from my hero!

@carl6551 7 лет назад

Hahahahaha so it is

@AndyManCam 7 лет назад

+Carl Getley 😁