I do 2 things: 1 - take off the protective film on topsheet before boosting 2 - stick the rubber while they're still dome, thats where the boosted effect come from
I respect your opinion but I totally disagree. The protective film is there to protect the already factory pre-boosted rubber from wearing off the effect of boosting. So basically if what you say was right why DHS use the top sheet covers to these Neo rubbers and sale them with these covers as well? It doesn’t make sense! In the National version that have no top sheet covers it’s evident that these have not been pre boosted from the factory. But in the Neo is a different story. Don’t take off the protective film but do it only before you play. Don’t glue if the rubbers are curved. You will have them unstacked after the glueing. Always wait for them to be flat or force them pressing them the other way around to become more flat as soon as possible!
@@gre78 I have to agree with what he said. The protective film actually limits expanding of the rubber after boosting (so it's better to remove it) and gluing when it has a big dome will provide the most tension in the rubber => better boosting effect. If you wait for it to become flat then you basically defeat the purpose of boosting which is having a more tension-ed rubber.
Yes but you are in a big risk of being disqualified so thus is not a wise choice. The way I explain is the safest choice. The effects of booster 100% don't go away. Otherwise why DHS to have been using in the Hurricane 3 Neo the protective film if it was no use of holding the positive effects of boosting? Your way if tested from ITTF you will be detected! Also it cannot be glued 100% perfect and you will always have this on your mind! Thanks a lot for watching this video and for your comment. Have a nice day and don’ t forget to enjoy table tennis! 🏓 💙
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V_oXga44TF4.htmlsi=BjUGVjJzvn82sdtd This video will solve your question! Thanks a lot for watching this video and for your comment. Have a nice day and don’ t forget to enjoy table tennis! 🏓 💙
Αρκετά. Βεβαίως εξαρτάται από το επίπεδο του κάθε αθλητή. Προσωπικά άρχισα με μια στρώση booster πριν μερικά χρόνια και πλέον χρησιμοποιώ δυο στρώσεις. Δηλαδή αν βάλεις μια στρώση από πάνω στην ουσία είναι σαν να έχουν μπει δυο στρώσεις booster (μια από το εργοστάσιο "για αυτό λέγονται neo" και μια από εμάς). Αν βάλεις δυο στρώσεις στην ουσία είναι σαν να έχουν μπει τρεις στρώσεις. Προσοχή να αφήνεται πολύ χρόνο να φύγει η καμπύλη πριν να μπει η κάθε επιπλέον στρώση. Επίσης η διαφορά είναι τεράστια και δεν είναι ανιχνεύσιμη μόνο και εφόσον έχει πέσει σχεδόν στο flat το λάστιχο και κολληθεί κατόπιν. Προσοχή να έχετε υπομονή. Σκεφτείτε σε καιρό με υγρασία για 2 στρώσεις περιμένω μέχρι και 2 μήνες πριν κολλήσω τα λάστιχα κατόπιν. Σε περίπτωση που βιαστείτε θα ξεκολλήσουν ανεξαρτήτως κόλλας περιμετρικά. Καλό είναι να κάνετε πάντα 2 σετ λάστιχα για να μην έχετε άγχος. Εννοείται το καλοκαίρι αν δεν έχει υγρασία ο χρόνος μπορεί να πέσει και στις 2 - 3 εβδομάδες! Thanks a lot for watching this video and for your comment. Have a nice day and don’ t forget to enjoy table tennis! 🏓 💙
Α χα κατάλαβα ευχαριστώ.Εγώ προσωπικά χρησιμοποιώ τα Neo Commercial χωρίς booster με μια στροση κολας εάν βάλω όμως δυο θα χαλάσει το tackiness και θα έχει περισσότερη αναπήδηση;
Δεν χαλάει το tackiness απλά γίνεται πολύ επιθετικό το λάστιχο και δεν συγχωρεί λάθη. Μπορεί να χάσει κάποιος σίγουρες μπαλιές και να βάλει τις πιο τρελές. Θέλει σιγά, σιγά η μετάβαση και αρκετά χρόνια! H Εθνική ομάδα Κίνας βάζει ακόμα και 4 επιπλέον στρώσεις δηλαδή σύνολο 5 οπότε καταλαβαίνετε για τι ταχύτητες μιλάμε!