No video :(

Hustler / Big dog spindle bearing replacement

Подписаться 13 тыс.

Просмотров 38 тыс.

50% 1

parts listed below
How to replace the spindle / Blade bearings on a Big Dog stout or Hustler Fastrak zero turn mower deck. Similar for many other mowers as well.
Bearings that have failed will often create a rumbing, roaring, or grinding noise when spun, but rarely will you hear it above the noise of the mower.
Parts:
Budget:
-KOB 6305 amzn.to/2F3pV5f
Mid range:
-VXB 6305 amzn.to/2Wxowdi
-JSB 6305 (x10) amzn.to/2WzW4vT
High quality: Nachi 6305 amzn.to/2MC4KgX

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 31

@AFIFI112109 5 лет назад

Thanks! I have a 48" Cub Cadet and it vibrates a lot and I will have to check the spindles! Great video!

@charlesecrowdersr3251 4 года назад

Ok hope this answered a question about a loud noise coming from the deck on a 54" Alpha Big Dog , when the blades are on it makes a terrible noise , will check the spindles as you showed after I remove the belts Thanks !

@victorjudice7344 2 месяца назад

I have already found out if you change 1 of them, replace them all.

@myway1able 4 года назад

Great video man, you just saved me money!

@keithdimmitt260 2 года назад

Great clear video! I'm in the process of replacing bearings on my Snapper ZT 44" deck. Is it possible I may not be able to access removal & replacement of upper and lower bearings from either end of the spindle? Almost looks like I have to take off spindle and insert via inside the spindle. If so, my biggest problem will be removing spindle from the deck since bolts are pretty rusty! Thanks for your help ahead,. Keith

@steveday2868 3 года назад

I have an exmark pioneer of simiilar deck spindle. I found out one needed replacing after it locked up and broke my deck belt. With less than 300 hours on it out of warranty. Not the first part that broke under there. The drive idler pulley broke, i bought a new part but just to see i rebuilt the old one using jb weld and put it in and after one season with it in its still holding up.

@sherrischneider2794 Год назад

Clean up those spindle shafts for easier insertion

@richardelverd3304 3 года назад

Just the info I was looking for... Thanks!!

@577buttfan 4 года назад

Ive gone for years with play in my spindles,I wouldn't worry about replacing them until they get sloppy. Also,the complete spindle assembly is only $50 bucks alot less dickin around.

@myway1able 4 года назад

577 Jersey Customs Adventures bearings $14 spindle $55 Literally 1 extra beer worth of time to save $41. I’ll drink the extra beer and use the $41 to get more beer lol

@577buttfan 4 года назад

@@myway1able ill probably so the same now that I have a shop press lol.

@joecordaro662 2 года назад

Nice video! Thank You

@fredhart7904 4 года назад

Good job, question, why not apply a thin coat of grease to the bearings allowing them to be driven in easier, what would it have hurt?

@pfun41 4 года назад

If it makes it easier to go in then it'll be easier for it to come out. I wasn't the bearings in there as secure as possible.

@spanky7777 2 года назад

Hi. Just bought a pair of bearings for a spindle on my Big dog. I don't really want to remove the whole deck. Would it be easy enough to remove the spindle from the deck and replace the bearings on the workbench? Looks like it's just the 4 bolts holding the spindle in place.

@harrydelcher4776 3 года назад

For the deck

@harrydelcher4776 3 года назад

I bought one just like it but did not have a drive belt on it what size is the drive belt on yours. Thanks

@paulmiller6548 Год назад

Changing the left idler pulley shaft if it is bent: similar?

@pfun41 Год назад

stationary idler is bolted in.

@EronIler Год назад

Roughly how many hours do you get from a set of bearings?

@pfun41 Год назад

They were noisy when I had the deck off last season so I replaced them. About 4-500 hours.

@kennyplay5982 3 года назад

Question. For the price of buying 2 bearings, could someone just buy close to the cost of the whole assy? Not having go thru disassembling everything, possibly risking damage and not putting back together correctly? Just simply assy replace it?

@pfun41 3 года назад

Depends on the quality of the bearing and the cost of the mandrel assembly.

@covidfake1573 11 месяцев назад

Are they factory sealed or do I need to grease them?

@pfun41 7 месяцев назад

A normal 2rs bearing is already sealed. Depending on brand repacking them with better grease may not be a bad idea.

@deniseperrone4111 3 года назад

Did you remove the blades before you pounded out the bearings?

@pfun41 3 года назад

I leave the blades on the spindles. There's no need to take them off.

@joshuadawson5850 Год назад

When I try to remove the bolt for the spindle, underneath where the blade attaches, it just spins. Any advice?

@bronwynrussell7763 Год назад

Put a block of wood under there with blade on.. it will stop it turning!

@idoewannautewno 3 года назад

You kinda cut away at what I'd call an important part of the instructional video. So I was curious about how you got the "snap ring" off? Cum-a-long, pry bar, needle picks, snap ring pliers? One more small question. When you screw the bolt on the shaft to knock the bearing out do you screw the bolt atw down?

@pfun41 3 года назад

I kept doing exactly what you see for a boring amount of time. Screw it all the way down.