Hydrogen Generator. HHO how to make 49 plates 

Please can you make one for me?

@@mahadtech4514 at the moment I barely had time to make another video... when I get more subscribers and more views maybe I'll make it for you.....

@@Inventive101 okay thank I want to keep one as sample in my village school

@@mahadtech4514 Where are you from?

@@Inventive101 Nigeria

Thank you! all the best

Thank you very much!❤❤❤

Thank you very much! your opinion matters a lot to me. all the best❤❤❤

Thank you very much my friend!

Thanks❤

Thank you very much!

😂

Thanks

Thanks

Muito obrigado!❤❤❤

Thank you very much, I will do that for you!

@@Inventive101 Waiting for you, brother

Thanks baby!

Thank you very much for the follow-up comment

Yes, I think I can do that

Grazie mille!❤❤❤

❤❤❤

they can also be used for motorcycles, thank you!

Congratulations! do you have good results?

Thank you very much, I have a video with this generator as I explained step by step. thank you!

Thanks ​@@Inventive101. can you please share that video link here? appreciate that

thank you! it is a very explosive mixture

Hello! is hydrogen with oxygen (hho). It is not a generator that separates oxygen from hydrogen but it can be done. as for the water from the dehumidifier, I don't know what to say, I don't know anything about it yet, generally distilled water is used....

I don't make it for sale

Δεν το κάνω προς πώληση, ίσως προσπαθήσω να το κάνω

Hi, I think it depends on each person's usage. to be used on a car, I think the dry cell is more suitable....

thank you very much! I use rubber gaskets but they don't stain anything, the electrolyte mixture is very weak for me. I don't have an exact measure, about 2-3 flakes per half liter of water

Hello! yes it is possible

to produce more hydrogen? bigger generator or increasing the amperes but when you increase the amperes you degrade the generator, so more boards, I will make one with 80 boards... and more...

@@Inventive101 Yes, produce more hydrogen so are you working on it find out how to produce more hydrogen??

@@chris01479 Yes, experimenting with them leads to beautiful performances

Can you produce h2 and O2 separately by putting a wall between anode and chatode? (remain the water contact on the reservoir floor?) The gases rises in the surface by own funnels to be collected?

​@@elfillarishould be possible. the result is probably impure.

Thanks!

Thanks!

Thanks!

Thank you! the thickness of the stainless steel plate is 1.5 mm for this generator and 10 mm Pexiglas

Thanks

Sir please send your email or Instagram id

No, I think I didn't run this generator for more than 2 hours

@@Inventive101 please chart the output (volume) of gas, water temperature inside the vessel, and current draw at steady voltage too. LOL.

No real results have come of this. Mass production isn't possible atm.

​@@jeffder7143says who?

Nah, cars would be too slow and you would need pig hydrogen production plants to make shit tones of it electric cars are better I'd say

can't exploit 3rd world countries with sending their children to mine toxic substances like lithium with hho.. good ol American sheepish consumerism 5

Real talk hydrogen is the future. Look up capillary fed electroyzers and why they're so great and what the engineering problems were for PEM electroysisers. Also the DOE just funded a billion dollars to build 8 hydrogen facilities in the PNW

Με ευχαρίστηση! γνωριζόμαστε;

Mulțumesc!

Γεια σας, έμενα στην Ελευσίνα περίπου 16 χρόνια. Τα υλικά για αυτή τη γεννήτρια φτιάχτηκαν πριν 13 χρόνια που είχα καιρό να παίξω, μου κόστισαν περίπου 400 ευρώ... Δεν πουλάω, και δεν φτιάχνω προς πώληση

¡Con mucho gusto! Pero todo hasta cierto punto, todo se detendrá si se publica un vídeo con hho producido de forma gratuita.

Some of my favorite generators. a new generator is coming next week. follow me to see

Some of my favorite generators. a new generator is coming next week. follow me to see

Some of my favorite generators. a new generator is coming next week. follow me to see

Some of my favorite generators. a new generator is coming next week. follow me to see

Some of my favorite generators. a new generator is coming next week. follow me to see

😂 yeah❤

the thickness has nothing to do with the production, no one said that...

Thickness has nothing to do with production

@@Inventive101 no offence my friend, in this great video you don't say anything with actual narration so people must extrapolate what must be done visually. You measured a 1.6mm plate with a vernier so your followers think this is the way it must be done. In my experience bulk and weight in a device, if it can be avoided, should be avoided. When making electrolyzers with 20 or more plates this becomes important. With 0.5mm plates a large series electrolyzer is a lot lighter and takes up less space. You can even cut the metal with regular scissors, but better to get a professional waterjet or laser cutter to cut them for you.

@@waynoswaynos The thinner plates may corrode faster. So in theory thicker may be better if you plan on using the device for some time.

May be right, but the type a of steel alloy should be more decisive concerning corrosion. Also the electrolyte should play a major role. There certainly are data sheets available for these parameters. Maybe hard to get.

the video was made two years ago, I used a car battery as a power source, if that tool is for AC current and not DC, it is possible that the values are not correct.... I will check,.....

the video was made two years ago, I used a car battery as a power source, if that tool is for AC current and not DC, it is possible that the values are not correct.... I will check,.....

я не понимаю твоего сообщения

@@Inventive101 Спасибо за ответ. Я хотел узнать знаком ли ты с Joe Cell технологией?

It could be done! but it depends a lot on how you do it and what kind of energy you use

Hello. it's rubber

It can be CD Dvd, harddrive. And zink screews

I have a video with this generator as I explained each step and each measure...

Я действительно не понимаю

Hello, I gave all the details and all the measurements in the video, what else do you need?

USE THIS AND YOU WON'T HAVE TO WORRY ABOUT MILEAGE FOR THAT CAR, MAYBE FOR YOURSELF EITHER.

@@Inventive101 Can it drive a 2.0 displacement car engine?😀

For any generator used on any engine, I think the most suitable ones are 1 mm thick

Potassium hydroxide in the form of flakes

@@Inventive101 In what ratio water to KOH?

It will definitely work! but how much grass do you have to mow?

@@Inventive101 Not having to buy gas for my mower and having clean burning mower would be great.

@@Inventive101 Have you tried to use a battery to power it? Like maybe a Dewalt drill battery, The 20Vdc 6amp type? Does it work?

@@user-zq6pj5jo8j yes i tried But, it works. I tried with bosch and milwaukee

That's ideal, I'll do it

I'm going to do this! I don't have much time

μπορώ να σε βοηθήσω

Hello, yes I have two hydrogen generators that separate the gases

@@Inventive101 I saw them. have you tried separating oxygen and hydrogen after it's produced as a mixture in the HHO generators? should be able to use a column with outlet at top for hydrogen and bottom for oxygen

❤

Tengo un video de agua de mar, pero en unos minutos y medio el agua esta turbia

I don't usually sell, where are you from?

Hello Friend. I use flashback arrestor acetylene. good luck

😬 yes, I won't play the music anymore. thank you

Salut! c'est de l'hydroxyde de potassium. tous mes vœux

Thanks

They will not oxidize, it is 316L stainless steel. instead, the water is heated more than it should be

@@Inventive101 above the stainless steel wires i saw electric wires connected inside.

@@edwingolddelirium now I understand what you are saying that it will oxidize. that part should not be in water, and better insulation... but the copper always oxidizes there...

@@Inventive101 I had the same issue. its now outside.

@@edwingolddelirium ok, thanks, I don't use it much, just a few tests, I don't use it for anything, I just like doing them. Good luck my friend!

I already separated it with another generator, another video

@@-sycamore I'm a beginner but I have already done this...

@@Inventive101 I was talking about separating them when they're mixed up, I mean it's possible but not really worth it since you can separate them from the source

@@-sycamore I understand, but maybe it's not worth it because you lose a lot of energy

Hello! I do not understand

@@Inventive101 just the clear end, reminds me of the oceangate sub porthole window XD

I don't advise to store it, I think it would be much safer to produce only what you burn...

Hello, sorry for the delay. if they are done well, none of them get hot, but with a dry cell it is much easier to ventilate the water.

I explained each one separately what it is, 304 stainless steel plates, rubber joints and plexiglass

about 400 euros for the materials 5 years ago

😁 I've done this before, I don't know in which video exactly, but in any case, you don't feel the vibrations of the explosion, outside of course

@@Inventive101 NOICE!!!! Stay safe and enjoy life my friend!

@@Inventive101 Look up the video fo Techingredients he has one with a huge bang.

Dengan sistem pelumasan yang baik, tidak ada hal istimewa yang terjadi selain pembakaran normal

Howdy! I use distilled water and potassium hydroxide

@@Inventive101 How do you figure out the amount of potassium hydroxide?

Hello! it is potassium hydroxide. potassium hydroxide flakes

@@Inventive101 Is there a way to contact you personally? I have some questions about a project

@@Mohammed-uz1sn Lately I haven't really had time for my projects either... you can write here or send me an email, but I don't know when I can answer you, where are you from?

@@Inventive101 I am from Saudi Arabia. I will contact you, but do you have an email?

@@Inventive101 sir

hello, I only installed 1800 on my own car, I don't know anything about the rest. I think one like this would be good.

Thanks

Quanto seriam necessários 160 cv?

Graphene (coated) plates would also be interesting. Graphene has 10x conductivity than copper. Probably impossible to acquire...

to use only hho without other fuel, you need 2 bars of hho constantly

I think I still have these files saved somewhere

Dc 12 V

@@Inventive101 ThisIsStandard,ButAcNobodyTried.

Realmente no entiendo tu mensaje

​@@Inventive101 la construcción de las placas está bien pero el equilibrio entre las placas y el voltaje? Es el mejor?

it's not low from my point of view, a hho production of 2 liters per minute with 13 amps consumed at 12v is a good result i think

I had two separate cells already