Hypermotard Is GOOO!!! | The Project Concludes

Подписаться 123 тыс.

Просмотров 16 тыс.

50% 1

My Ducati Hypermotard 1100 S rebuild project is finally complete and road read :-)
Massive thanks to my channel supporters:
Bikesure Insurance for all your Motorcycle insurance needs:
www.bikesure.c...
The BEST motorcycle accessories at Pyramid Moto : ⬇️
pyramidmoto.co...
Helmets and kit from Helmet City: ⬇️
www.helmetcity... Code HCLCR24 for 15% off!!
Bike Gear By KNOX: ⬇️
www.planet-kno...
Phone & camera mounting: ⬇️
ultimateaddons... - LCR10 Discount code for 10% off!!
-----------------------------------------------------------------------------------------------------
LCR Stickers and Merch available at - lambchopsrides...
----------------------------------------------------------------------------------------------------
Join the Team:
/ @lambchoprides
----------------------------------------------------------------------------------------------------
Money Off Codes!!:
15% off all products over £50 at Helmet City with code HCLCR24
www.helmetcity...
The New Insta360 X3: store.insta360...
My Insta 360 Camera One X2 - www.insta360.c...
New Insta360 One RS - www.insta360.c...
Phone holder Ultimate Addons 10% off with code LCR10 ultimateaddons...
Cardo are the best intercoms available and get them with 20% off! - cardosystems.r... Use code LCR
Helmet Camera Mount (Dango Designs) 10%
dango-design.c...
===================================================
Riding Gear:
Honister Jacket
www.planet-kno...
Gloves - Knox Urban Pro
www.planet-kno...
Riding Jeans - Knox Rydal
www.planet-kno...
Helmet HJC RPHA-1 www.helmetcity...
with custom Gopro chin mount from www.fabcustomm...
==================================================
More from Lambchop Rides on:
www.Twitter.com/lambchops1971
www.Facebook.com/LambchopRides
Instagram - lamb_chop_rides
Thank you
Chops
#TeamLCR #LambChopRides #hypermotard1100S

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@luddite6239 22 дня назад

Regarding your stiff gear shift, if it's still a problem after you're back on regular oil, consider these things: 1. Do you have any clutch drag? With the engine warm but switched off in first gear, can you push it along easily with the clutch disengaged? If not, maybe the clutch needs further bleeding. 2. You fitted an Oberon slave I think? That gives a lighter pull at the expense of some lift. So if it's dragging despite a good bleed, consider your clutch pack. If your new clutch stack height is a bit higher than optimum, then the clutch may not be fully disengaging. You could always swap back to the standard slave, just to see if that makes a difference. (By the way, my 1100 Monster has rearsets and an Oberon slave and the gear change is super slick - much better than standard.) 3. As the engine's been rebuilt, the gear change selector arm has been removed and replaced. It can be adjusted a few millimeters fore and aft but needs to be precisely centred to ensure smooth shifting. It lives under the alternator cover and might be worth investigating if all else fails. Enjoy!

@LambChopRides 21 день назад

I will try those tips thanks 👍

@tigerzero9939 7 дней назад

This bike is incredible. It looks better and better the more I look at it.

@darylclifford 22 дня назад

Have i been following you for years now Chops? Bring on many more !!

@LambChopRides 21 день назад

Thanks Darryl 👍

@nathanwhitley3358 22 дня назад

One of the OG RU-vidrs and an OG hyper built to absolute perfection, what’s not to love. Always appreciate your passion chopsie, it’s an inspiration to see you enjoy it like a joyful kid.

@LambChopRides 21 день назад

I appreciate that Nathan 🙏

@ChrisMcEvoy72 18 дней назад

Never get bored of hearing that sound. What a beauty! Fascinating insight into the running in process after a rebuild too. Looking forward to what that custom exhaust looks like and you finally being able to give it some beanage.... 😎

@KelvinChilvers 17 дней назад

So pleased to hear all is well with the bike. Looks fab

@crnamrlja 19 дней назад

Oh, man. What a magnificent machine...Hat off! *I had the same exact Escort 1.4i until 7 years ago :)))

@steveparish9210 19 дней назад

You’re certainly conscientious. Wondered how you got it started again, under seat exhaust will be cool though the exhaust you have looks good. Beautiful bike glad it’s coming together so well

@jasonking4209 22 дня назад

I hear you should be giving it a little beans while running it in. I watched a Cycle World podcast where they discuss in detail how an engine should be ran in. I've been here through the whole build series by the way!! Just a refresh! Lol

@martinp1539 21 день назад

Run it in like you're gonna ride it is my advice. Manufacturers just want you to go easy on new bikes cus of the brakes and tires

@LambChopRides 21 день назад

Yeah I'm changing oil now at 300 miles and going semi with more beans 😁👍

@FoxtrotOscar999 14 дней назад

Nice work Chops! Quality bike and project overall!

@LambChopRides 14 дней назад

Thanks buddy 👍

@redleadervfr-v4906 11 дней назад

Well done chops you have done a brilliant job buddy. The bike really sounds sweet and no strange noises and it look’s amazing too. You are underestimating yourself buddy the bike is going to be perfect just can’t wait for the Dyno 👍

@LambChopRides 9 дней назад

Thanks 👍 😁

@lucatarchi7713 19 дней назад

Probably one of the best looking Hypermotard! Congrats!!!

@sburns2421 21 день назад

Need a track day on that thing!

@Wats1984 22 дня назад

What a sorted looking & sounding machine! Enjoyed following this build series from the start! Good work chopsy! 👍

@lordgibbness 19 дней назад

Hey chops, can you check all your gear shift pivots are 90° turns, as that helps with mechanical advantage.

@alfarks1 22 дня назад

Bloody hurrah! Love this build, and been waiting for it to be finished for years Chops..! You were getting close to giving Binky a run for its money there mate.. 😁 Worth the wait though, looks amazing.. can't wait for what's next, hopefully a keeper!

@creedm3040 22 дня назад

Awesome video! I love that bike. Beautiful for sure. The twin exhaust idea is brilliant. That will do it. I like the common sense in the oil changes and analysis. That will ease your mind. Looking forward to more on this. Best!

@kimetogo 20 дней назад

Great it passed the MOT and looks great, a lot of work but worth it. Cheers

@LambChopRides 20 дней назад

Thanks 👍

@RobertKehl 21 день назад

I agree with the fellow about a hard break in especially since this is not a new motor its basically just a rebuild. Manufactures usually want you to be easy with the bike for the first 600 miles to let all the metal mesh with each other. In this case you’re only breaking in the piston rings. The best way to seat your rings is to do multiple heat cycles with aggressive on throttle and trying not to keep the engine running at a constant speed for too long. So basically ride it like you stoled it. Let it cool down. Repeat ride it like you stoled let it cool down a few more times. After about three to four times your rings will be properly seated. Now you can ride it race it or just put it around.

@martinp1539 21 день назад

Run it in like you're gonna ride it is my advice. Manufacturers just want you to go easy on new bikes cus of the brakes and tires

@DiagJez 21 день назад

In any case, you're only breaking in the rings.

@henrymarkey6940 21 день назад

looks absolutely stunning should be well happy m8

@tonyciriello6872 10 дней назад

Analog rules !! On motorcycles and music.

@rainbowchaser9604 22 дня назад

You really should give it a bit more throttle when running it in. Repeated hard pulls, then ease off. That's what gets the rings bedded in. Constant low rpm will do it no favours as things will just glaze, not bed in

@LambChopRides 21 день назад

Yes it's now had some decent pulls, only took it easy for 100 miles

@stevecade857 22 дня назад

She a beaut. I love the classic Ducati font on the tank. It actually looks modern to me. You had better get some PPF on that carbon fibre before it gets scratched just like you did with the H2.

@ragerider6283 22 дня назад

Great vid & great to see the Hyper up & running. Looks stunning & can't wait until it's run in & you can give it the beans!

@LambChopRides 21 день назад

You and me both! Thanks buddy

@dalemeadows225 22 дня назад

Brilliant work. Some fantastic improvements, kudos to all involved

@JarodThurley 21 день назад

Well done mate! Looks a real beauty.

@MrAndrew1953 20 дней назад

❤ Congratulations- your perseverance with this project is amazing- above and beyond most mere mortals. A unique bike you can’t buy off the rack 😅.

@LambChopRides 19 дней назад

Thank you Andrew 👍

@Darkman79 22 дня назад

Well Done Chopsy! HyperSumo is spectacular!!

@61greybeard 22 дня назад

She looks stunning Mr Chops really pleased your sorted out the teething problems and she sounds amazing even taking it steady great job love a v twin 👍👍👍

@LambChopRides 21 день назад

Thank you kindly sir 😁👍

@n22pdf 22 дня назад

Awesome job Chops well done dude.. yeah I think the other exhaust you mentioned your getting built will look nicer.. Pete

@brianrainey2739 21 день назад

Good luck Chops! At least you have the 690 when you’ve got all your sumo gear on and this thing won’t start! 😆

@martinhughes9769 22 дня назад

Always enjoy your videos nice to hear your commentary on all what’s been done and your future plans to improve it even more,

@LambChopRides 21 день назад

Thanks 👍

@ThisOldGuy3 21 день назад

I recently traded my 2022 R7 for a 2018 Hypermotard 939 SP and I am very happy with it. 🤘😎🏍

@lold6130 22 дня назад

Looks beautiful John. Well done buddy.

@LambChopRides 21 день назад

Thanks matey 👍

@TwinPotMan 21 день назад

Great to see the bike finished but more importantly where's Mavis?

@MrTurboJon 20 дней назад

Love the channel Chopsy, keep up the awesome work. By the way, are you not in the 'hard break-in' camp?

@LambChopRides 20 дней назад

Thanks Jon, no I'm in the gentle camp. Well with some load to get things bedded in 👍

@liamgreen9665 20 дней назад

Brilliant video once again, can't wait to see the Kawasaki build start. Anyone got the opening credits song?

@BoianIliev 20 дней назад

Where is the promised mt 09 y-amt review Chopsie.. come on mate.. we burning.. 💪🏽👍🏽 We need to know is it worth it or should we stay with the quick shifter. Or maybe should we wait to see what the new z900 will bring for 2025.. it’s gonna be interesting. And you will be our guideline mate. The best man for the job. Doing a great job! Just like Virgil guided Dante through hell in the Devine Comedy.

@LambChopRides 19 дней назад

Very soon working on it now 👍

@geoffreykeown2878 21 день назад

Well done chopsie, nice bike, love the look of all the carbon, regarding gear shift, dry clutch could be a bit tight, ?????

@LambChopRides 21 день назад

Yeah I have a Slipper clutch to fit so that may sort it.. 👍

@jamest5149 21 день назад

Do another two oil analysis when you change from running in oil onto your normal use oil, you will see a change again and further reduction on wear elements. Glad you took the advice to change the oil at 100 miles but personally I wouldn’t put more running in oil back in, I would have jumped to the normal use fully synthetic oil.

@LambChopRides 21 день назад

Yeah I'm going to change now which is 300 miles and go semi synthetic

@jamest5149 20 дней назад

Perfect, I was worried you were going to go too long on the running in oil, it realy is only needed for the first 50 miles to bed the rings in. Everything else is running on a film of oil so the changes are used to flush any dirt and dust from the build out as well as build greases and sealers. Two changes in quick succession are needed when ever you change oil grade or type as the additive packages don’t always play nicely together and you can see a spike in wear materials until the second change is done. See if you can get some sponsorship from the oil analysis company and a oil supplier and do a series on this…. Its a interesting topic, under reported and even less understood. Find a willing tribologist to explain the results 👍

@mrsmith697 22 дня назад

She is a live..🎉 hurray

@mrstatictunes 22 дня назад

Love this bike.

@leontrice5346 21 день назад

Can’t wait for the Kawasaki restoration next

@WillfulThinker 20 дней назад

So a gunked up starter relay was the cause for the non-start issue? I'll have to remember that, as my HM1100S does that about 1 out of 10 times I start it, which hasn't been enough motivation for me to troubleshoot. But if it gets worse, I'll know where to look first. \m/

@LambChopRides 20 дней назад

Yes absolutely 👍👍

@wattie1050 22 дня назад

4 years chopsy !!!!! That's an apprenticeship 😁😁😁 looking good mate , the oil analysis should be interesting 👍 bike sounds nice as well .I'm sure bike should be fine your just worrying too much .😀

@LambChopRides 21 день назад

Thanks 👍

@averagebiker 22 дня назад

Looks mint

@The_Heathen89 21 день назад

I now can't remember if I emailed you to say your rear tyre had arrived. 😬

@LambChopRides 20 дней назад

Yes thanks Jack, I will be down next week buddy 👍

@cralee6892 19 дней назад

Always watch lcr but I must say I don’t much like the exhaust it’s a bit too visible

@JayVtec-GAMING 22 дня назад

Haven't you got a healtech QS to go on the hyper?

@LambChopRides 21 день назад

Yes but keeping it old school 👍

@JayVtec-GAMING 21 день назад

@@LambChopRides Nothing wrong with that chops, Enjoy bud!

@desislavivanov3279 22 дня назад

Very nice bike..

@WillfulThinker 20 дней назад

Is the ECU still factory fresh, or did you have it flashed?

@LambChopRides 20 дней назад

It's got the ducati map for the pipe and cams currently

@comfysofa1549 21 день назад

Mine would go so much better......if it had a nice new rear suspension....tie bar!! :) :) :) - nice to see it back on the road...properly...i did say about the gearshift mechanism....did you get the return spring and ceramic bearing from Factory Pro..? oh ill be at caffeine and machine just across from Loomies tomorrow morning if youre about.. (save sending the tie bar if youve still got it of course)

@LambChopRides 21 день назад

Ah yeah I didn't... should have listened to you 😄 won't be out tomorrow as still in Spain on the Y-AMT launch. But unfortunately I can confirm tie bar is MIA sorry buddy 😕

@comfysofa1549 21 день назад

@@LambChopRides ok...no matter! Cheers

@comfysofa1549 21 день назад

Have you got a link to where you got it from?

@LambChopRides 21 день назад

Now you are asking... It was from the US , could have been Ducabike one

@223Sako 21 день назад

Crank balancing is money well spent.

@grenphelps7455 20 дней назад

Just ride it and stop worrying about it, if it stops you'll know, your a bit of a worrier....

@matthewmuellner 22 дня назад

I don't know how you rode the hyper11 for so long without any sort of hooliganism. Can't go 5 min on mine without one tire or the other spinning or lifting

@LambChopRides 21 день назад

It's tough! 😄👍

@santapodracer1980 21 день назад

Great bike but you constantly worrying is a tad annoying especially last vid on this bike. Anyways like I said great bike enjoy.

@davidbird380 22 дня назад

Cough cough. Plz don’t sell it. Cough

@SteveBrowner 22 дня назад

Roll on next summer 👍 the oil analysis will be an interesting topic.

@Boxer4ever 22 дня назад

13:50 that LC500 should always be recognised. I would love to do 1100S or SP rest mod

@seanfavouritesongswithkayb9868 22 дня назад

Hopefully there will be more Hypermotard content going forward on your excellent channel , my favourite motorcycle channel for whatever that's worth 🙂👍

@LambChopRides 21 день назад

Thanks buddy much appreciated 👏

@gordonatkins9135 22 дня назад

Fours years I’ll never get back! Joking, loved every video Chopsy….enjoy

@LambChopRides 21 день назад

Haha 😄

@darrenhall6509 22 дня назад

Glad I`ve got an ordinary bike, don`t think I could take the stress...

@LambChopRides 21 день назад

Haha 😄

@10secondsrule 21 день назад

This sounds just like my s2r of the past. Lovely restoration but I’ll never understand an open clutch and other mismatched colour anodised bits 😳 too much of Lewis Hamilton edition for me. I’d probably paint subframe red. However that’s not my bike so I do enjoy you liking it and that’s what’s most important. I miss some of the rural b roads of the U.K. I’ve now left - it’s been a loooong project!

@project618 19 дней назад

Looks really good for a 09' that carbon makes it pop. A nice colour on it but so you can still see the weave would be nice but the stealth look also looks really nice. Question still remains whether a Hyper could be a one bike garage still think a super sport is top of my list although these often tempt the wallet. Keep it rolling Chopsy.

@dukerider0319 19 дней назад

Good work mate glad you got the teething problems figured out. Looking forward to seeing how the mapping goes! Follow Hypomotard rider!

@stephenransom3076 21 день назад

Finely a bike mirror where you don't see part of your arm great stuff just wish manufacturers new how to do mirrors on a motorbike, if i want to see my arm i look to the left or right don't need to see it in my bike mirrors. That just bugs me about new motorbikes 😠😠😠😠.

@anthonychambers3348 18 дней назад

Love to see your face when you crack the throttle in second and it pops straight up. Mine done it with a filter and exhaust let alone all that..

@soilsmanadv6673 9 дней назад

I want one!! I can't fine any for sale in 500 miles...

@helgejohan3604 18 дней назад

Motul 7100 15/50w then better gear change✊🔥

@nokneedownian8521 21 день назад

A thing of beauty

@davidellis2021 22 дня назад

Where's the ZXR750? 😁

@starfox_wr-45e93 22 дня назад

😂

@LambChopRides 21 день назад

Haha shhh 😄

@AlantinoRossi 21 день назад

Where's the ZXR?

@chriswest2290 21 день назад

Rozzers will give you s***, for one wing mirror.

@LambChopRides 21 день назад

It has two, just the other is abit loose and doesn't stay in position so don't use it

@Mark........ 22 дня назад

Oh don't worry chops we'll start whining when is the zxr going to be finished lol , well done bud the Duke looks awesome

@TheScortUK 22 дня назад

Looks stunning mate, I would love me one of these as a second bike, but Wife and Funds won't permit lol

@gavd6726 21 день назад

Hope it's the end of the issues. The bike is stunning. Well done Chops. 🤝🏼🏍️🥳

@tigerzero9939 11 дней назад

Love the bike. Hopefully you bring it back on the channel even if it is not a full length video.

@LambChopRides 9 дней назад

Oh it will be back don't worry 👍

@tigerzero9939 9 дней назад

@@LambChopRides Great! I ran Motul 300v oil and had effortless yet positive gearshifts. I could upshift/downshift with no clutch just by rolling off and back on the throttle. Also, I loved the strong engine braking so I didn't switch to slipper clutch.

@bakedbeanzontoast9078 22 дня назад

Good job, now relax with a nice chilled bottle of Chablis on the patio.👍👍👍

@_Archambaud 22 дня назад

Well done must be satisfying 👍

@CodgerBiker 22 дня назад

Congratulations. 👌 Personally, I've enjoyed every minute of the series. Am I now 4 years older? 😉😂👍

@LambChopRides 21 день назад

Thanks buddy

@wakely1001 22 дня назад

Finally 👏🏼What a build sir 🎩

@AjackLee4 21 день назад

GORGEOUS!

@davidelizabeth4933 22 дня назад

👍👏 ❤ ❤

@alf9638 20 дней назад

CHOPSEEEEEYYYYYYYYYYYYYYYYY - Been waiting for this since all the teasers in the SUPERMOTO build back in the best-forgotten covid days. You've done it, woah, end of an era lol well done.

@LambChopRides 20 дней назад

Thanks Alf 👍

@lukethompson3750 20 дней назад

Been soooo looking forward to seeing the first proper ride out on the Hyper, what an achievement! With regards to the stiff gear change, I had the exact same problem on my 2007 Hyper and the reason for it was the ‘selector claw’ was not aligned properly. Page 455 on the PDF manual shows how to align this 👌🏼 If this is the problem, when tightening the gear selector mechanism back up make sure to use the correct loctite and torque both bolts to their exact spec!

@LambChopRides 20 дней назад

OK fantastic Luke 👍

@luddite6239 22 дня назад

Great to see the Hyper finally running smoothly. I've had my Ducati Monster oil analysed by Millers and they're really quick - I got a full breakdown of the oil emailed to me exactly seven days after I put the sample in the post. I'd definitely recommend this service in your case with a rebuilt engine or also if you've just bought a second hand bike so you can check on the health of the motor. (Maybe get the R1 analysed at the same time.)

@LambChopRides 21 день назад

OK good news 👍

@jameshisself7375 22 дня назад

Lovely job. I have a similar model, could you point me to where you found the oil cooler lines? Those meet my needs perfectly from what I can see in the video. Cheers!

@LambChopRides 21 день назад

They were from Itally... can't remember exactly but Google oil cooler lines.. began with Fren... Sport maybe..

@jameshisself7375 20 дней назад

@@LambChopRides Sounds like FrenTurbo, I'm familiar with them but hadn't seen the specific long fitting with the 90 degree on it that yours has, which is just like factory only these are anodized aluminum. I'm not finding those, but still searching. Thanks.