HYUNDAI SONATA LED HEADLIGHT BULB UPGRADE - How to Install LASFIT LED Bulbs on a Hyundai Sonata

Подписаться 18 тыс.

Просмотров 28 тыс.

50% 1

In this video I install and Review LASFIT LED Bulbs. I’ll show you how to replace the Low Beam and High Beam Headlight Bulbs on a 2011 - 2014 Hyundai Sonata. Then I compare them to the stock Halogen headlight bulbs. LASFIT LED Bulbs are very bright and greatly improve night driving visibility. Great Upgrade for any vehicle!
www.lasfit.com/
I hope this video helped you. Please don't forget to LIKE and SUBSCRIBE. Thanks for Watching!
Get FREE unlimited Shipping, Movies and more - amzn.to/3jbgbsH
Click on the Links below to purchase:
*LASFIT LED H7 Headlight Bulbs - amzn.to/3D7BZ3B
*Craftsman Screwdriver Set - amzn.to/3l6BcYn
*Craftsman Mechanics Tool Set - amzn.to/3bdiCql
*Nitrile Disposable Gloves - amzn.to/2RO0kqi
*Gojo Hand Cleaner - amzn.to/2HgIuXF
*Shop Towels - amzn.to/2ZQvnTs
*Fixin To T-shirt - amzn.to/33OgqTg
*Car Guy T-shirt - amzn.to/37JpfRS
* Fixin It is an Amazon Associate and earns from Qualifying Purchases.
email: fixinit7@gmail.com
Instagram: / fixin_it_
TikTok: vm.tiktok.com/wmnw6v/
#fixinit #lasfit #hyundai #ledlightbulbs #howto #headlights #hyundaisonata
Disclaimer:
Due to factors beyond the control of Fixin It, I cannot guarantee against improper use or unauthorized modifications of this information. Fixin It assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Fixin It recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Fixin It, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Fixin It.

Хобби

Опубликовано:

24 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@reda497 4 месяца назад

Thanks man, couldn’t have done it without you

@simchou7828 4 месяца назад

Very interesting and informative.Thank you

@marjoriec1234 5 месяцев назад

Thank your video helping 👍👍👍👍👍

@liamsanchez629 Год назад

my guy, excellent video!! You explain it soooo well.

@fixinit Год назад

Thanks for watching!😎

@abdulkhawaja9792 Год назад

@@fixinitawesome bro .... so useful ! Bro I will do the replacement for my sonata 013 2.0T also. Do you recon these will fit? Also, did the bulbs over heat and blow out in you or still running steady? I was wondering if making small holes in the cap with a drill would help the fans with heat dissipation .... since the heat would just be locked in due to the caps? Or maybe hiles would cause condensatiin in the lights ?? Not sure. Any suggestions?

@abdulkhawaja9792 Год назад

@@fixinitbro whats the price .... can you please share the direct link please so I can buy them. Also are these LEDs legal to use instead of halogens bulbs in USA? thanks bro

@fixinit Год назад

Yes the H7 bulb will fit. No overheating. Just leave the caps off if you are worried about overheating. If you get condensation put them back on. The link is in the video description and yes they are legal.

@RaHuBBz 8 месяцев назад

I'm really hesitant now when it comes to getting more LED bulbs for my 2012 Hyundai Sonata because the last ones I got flickered all the time. They was the Auxito Bulbs. Do the Lasfit bulbs flicker? I noticed it had a box with the wiring. Thanks.

@djjohnson5580 5 месяцев назад

I did an upgrade on my 2013 sonata. High beams awesome. Low beams on the projector side not so good.

@SHARKY480ARIZONA Месяц назад

Have you had any issues with bulbs burning out and even getting so hot they melt the housing?

@Spacemountain14 Месяц назад

@SHARKY480ARIZONA I'm having issues with my right brake light I have bulbs mainly and I got a new light housing harness because mine was melted out and now the brake light bulb does wanna stay seated. There is a recall on these cars though for brake lights

@johnclamshellsp1969 Год назад

Really great video. Question for you. How does the LED bulb cool itself with the weather seal cover in place. No place for hot air to be vented.

@henrythompson1892 7 месяцев назад

It won’t. The hot air will accumulate in the bulb housing and burn out the light. You can get an aftermarket dust cover online, that way the air can be vented through and keep your LED bulb nice and cool

@johnclamshellsp1969 7 месяцев назад

@@henrythompson1892 Well thank you and Merry Christmas to you.

@fixinit 7 месяцев назад

It’s been almost a year and bulbs are still working fine with the covers on. If you are worried, just drill a few holes on the dust cap. Free

@roberthughes9494 11 месяцев назад

You can't cool something with the same recycled hot air there has to be a way to vent the hot air and bring in the cool air.

@72wisdom 10 месяцев назад

Turn signal, stay lit with LEDs ?

@tothred666 Год назад

Very useful videos. Thank you for that. I have problem with the key fob. Actually that problem just started to happen. When I want to open the doors with the key fob it doesn't react. I need to press the button over and over again for it is to open. That's why I open the doors manually. But when I want to lock the doors it works. So I don't think it is a battery problem. Also I used the spare key fob same thing with that too. Do you have any idea why it makes that problem? Can it be something with the fuses?

@fixinit Год назад

If all the other buttons work, the problem is a bad unlock button. You will need a new key fob which will have to be programmed to your car. Key fobs are cheap and looks like you can program yourself on some models.

@tothred666 Год назад

@@fixinit Thanks for the answer. Actually none of them work in the first time when I want to unlock the car. After I manually unlock the doors, the alarm starts beeping and when I put the key fob to the place where you start the engine it all works fine. After I drive when I lock the doors again it works. Just in the first place when I want to unlock the doors it doesn't work.

@fixinit Год назад

Try changing the battery.

@chrisboyle9147 4 месяца назад

How do you do this for a 2019?

@rick3896 7 месяцев назад

Perfect video

@jirahmekseti9349 Год назад

Do you know any headlights leds that fit a 2019 sonata

@fixinit Год назад

Check their website www.lasfit.com/

@yaakcon 10 месяцев назад

Where did you buy it? Can you put the link here please? I need the low beam

@fixinit 10 месяцев назад

Link is in the video description

@jackchen4515 Год назад

is low beam and high beam LED light exactly same size?

@fixinit Год назад

Yes

@nickfumo 8 месяцев назад

How the hell did you get all the wire with that little box to fit

@cirobravo7467 Год назад

What is the maker of the one you installed?

@gabriellebrown20 Год назад

Lasfit-it’s around the first minute of the video he shows the box 🙂

@eman3414 6 месяцев назад

Change my bulbs to led and it hard to see at night.

@ImVekg 4 месяца назад

How if they’re brighter?

@electraglideclyde 5 месяцев назад

With putting the stock cover back on, looks to me they will overheat.

@diesel50011 11 месяцев назад

I have the same car, and purchased the same LS series lights from Lasfit, the bulb will not fit fully into the ring because of the retainer clip that holds the trim ring in place. The bulb literally hits the retainer clip on the top and bottom because it sticks out further than the ring does, so i cant get the bulb in far enough to twist to lock it in, how is it that no one else has had this issue? Its pretty straight forward, but the retainer clip makes it so you can't seat the bulb. Wtf?? Please help, how does yours not hit the bulb?

@fixinit 11 месяцев назад

Try bending that clip so it lays flatter. Hopefully that helps.

@diesel50011 11 месяцев назад

@@fixinit I tried that, the problem then is that the flatter I push the clip, the further it extends up and then it won't clip into the catch at the top, I don't know how else to get these lights to fit, unless I can find some lower profile type of clip or something, I may just be returning the bulbs unless Lasfit has some advice. Not even sure why these clips are a thing, it's just an awful design, twist n lock would've been just fine...but you didn't have any clearance issues getting yours in??

@fixinit 11 месяцев назад

I agree, not a great design. They are not the easiest to install but I didn’t have the problem you are having. Try returning them and buying AUXITO bulbs. I have them on my Honda. Maybe they’ll fit better.

@diesel50011 11 месяцев назад

@@fixinit I may do that, I've always used Lasfit, might be time to try something different. Thanks for the replies!

@mohammedessaki3034 Год назад

125$?! No thank you

@larkdeisel9391 Год назад

Don’t complain then get the cheap ones that don’t last

@landry2034 Год назад

So what if you broke the little metal clip that holds the bulb in place tight is there any other adapter socket to replace them? So it can lock in place. Because I have been browsing on youtube for a way to fix it or if I would be able to find any kind of adapter clip I've looked at these, "A ABSOPRO H7 LED Headlight Bulb Holder Adapter Socket Base Holders Clip", "HUIQIAODS H7 LED Headlight Bulb Retainer Adapter Base Holder Socket," and "Ligdeun. auto H7 Adapter Holders H7 Retainers Click Socket Base." But I don't know, because I don't want to replace a whole head headlight only for a high beam clip. But if anyone sees this and has any suggestions please let me know t would really help.

@fixinit Год назад

I have seen some universal clips in Amazon that you can probably make work. Or try going to a junk yard and pull the clip off a Sonata with a broken headlight.

@Monica111960 Год назад

I have been driving around for several weeks without the clips. Not because I broke them, but because I was not able to make them click in place with the LED bulbs. The metal part of the LED bulb fits perfectly, as it has a tab and I don't think it can go anywhere considering that there is also the plastic cap. Are those clips really necessary?