I Automated Every Enchantment with Create 

this video is sponsored by you! thank you for watching and supporting the channel :) edit: ink... it said ink...

>spells out loud that book printing needs ink >tries to print a book with liquid experience

Shalz it consumes INK not enchantment thingy

(shalz reads that the printer needs ink) "why is it not working? :("

"consumes 5 mb of ink!" *stares at it without puitting any ink* "PRINT IT!"

shalz: "consumes ink" *proceeds to not add ink and gets frustrated

“It’s gonna suck on it” - Shalz 2024

2:09 you need ink for that, and then it will happen

Printer: "requires *ink*" Shalz: "I'm gonna pretend I didn't read that"

To reset the enchantments, you can use **Rose Quartz Lamps** instead of regular lamps. A rose quartz lamp, when touching other lamps, only allows one lamp to be activated at a time. Therefore, a customer can press the buttons for whatever enchantments they want, highlighting that specific lamp, then activate the mechanism. After everything is enchanted, you can use Redstone links to activate a separate lamp that unhighlights the selected lamps, deactivating all chosen enchantments. Much easier than manual labor or a T-Flip Flop, and it can even be connected to conflicting enchantments (Smite/Sharpness/Bane of Arthropods and Silk Touch/Fortune) to prevent someone trying to get silk touch and fortune on the same book.

If you want to copy your books that are signed, you need to mix ink sacks and water to get ink. And then you can pump it in the printer.

Cobble + crushing wheel --≥ gravel, gravel + crushing wheel -->sand, sand + ghosting --> soul sand, soul sand + washing --> quartz + gild nugget, quartz + crushing wheel --> EX nugget Very efficient, if you ever think of doing the enchant factory

Shalz: "It needs 5mb of ink" * uses not ink * * doesn't work * Shalz: * supprized pikachu face *

I have to live with the fact that you somehow tried to print a normal book with experience

"I do not know what to put in the printer", it literally says: "consumes 5mb ink", you need ink to copy non-enchanted books.

Bro literally said "consumes INK" and is confused when it won't copy it when it's holding exp

Someone already recommended the T-Flip Flop switch for reseting levers, but with dropers. In my opinion, the option with sticky piston is more fun. Basically, you use a scheme: Stone button powers the redstone dust that goes into block that is immediatly moved by sticky piston under it (basically making a 1 tick pulse), then repeater into sticky piston that moves a block which either disrupts or enables the redstone connection. The thing about 1 tick pulse is that sticky piston doesn't have enough time to get the block back, so with every press of button it can only either move the block or pull it (In case it's hard to visualize, you can find "T-Flip Flop switch" videos, for example Mumbo explains that exact type in the first minute of video, he also explains other types of that switch that might help you to make a Create version easier). As for how to do it, if Create has any way to track the item on the conveyer belt or depot, you can easily track when the items come to the end depot to reset all blocks by simple piston pushing them all back to the starting position. If not (and comparator doesn't work as well) - I can't really think of anything except making some timer based on the highest amount of time taken. As for another suggestion, I'd make some fool-proof system for overlapping enchantments. I don't know what blaze does when it can't enchant anything, but there should be something against "press all the buttons" (even giving out some "easter egg" item or book with you scolding the person who's greedy and wants everything that comes out before the item they provided XD) And again, that's vanilla ways. But learning those vanilla ways can help you find better Create solutions ^_^ P.S. Oh, and I can't miss the obvious one... You. Need. Ink. :P

This is so SICK. I mean we killed a couple of sheep over here -Shalz 4:06

"Where a deployer touches them" Shalz, 2024

should prob have a glass wall so customers can watch the enchanting while they wait

If it says print with ink, you probably need ink

printer:needs ink shalz:why isnt it working?

Shalz you could use buttons and a T-flip flop to allow the lamps to be reset. Using the classic two droppers one hopper one comparator design you can reset all the flip-flops without turning on the powered ones. That would allow all the lamps to be reset after each use without setting ones you don't want, like a copper bulb design would. At least, I think that's how it would work, I haven't built a dropper T-flip flop in a while but that's how I remember them working. I think powering the bottom dropper is the one that resets them all without powering the ones that weren't on, as the top dropper is the one that is read. You would need to invert the comparator output though, as the items in the dropper would be put in the top dropper as standard, so make sure to hook the comparator through a redstone torch before going to the redstone link.

Thoughts: - An indicator with a smart observer to see if the shop is ready rather than a manual sign - build it in an area people will be in and it should passively gain enough xp - make a toggle for the farm that disables it when the tank is full for lag - you should be able to use a button selector panel which is resettable (using vanilla redstone), and you can also group mutually exclusive enchants in a circuit to make only one selectable (ex: hermitcraft 9 decked out difficulty selector)

You made your contraption much more complicated than it it should be. You could've made one belt for unbreaking and mending, which should break off with launchers(or somethin' I forgot the name) to different belts for different tools, even with the added feature where you could pick the enchantment you want.

The "Wooh" sound you make is hilarious

SHALZ pls do not discontinue your survival server after ep.10. It is what gives me ideas on what to do in create as well as being the best create series out there. 🙏

Consumes ink: 5mb Shalz: EXPERIENCE

gotta love sharpness V (one)

Bro is literally creating an enchantment industry.

Shalz I'm so proud of you, you've grown such a huge community over the years

I can’t believe you’re feeding the deployers’ addiction. I spent a long time training it to stop defiling the dead.

This has to be illegal 🤨

I love green sticky substance in me

For the record, the blaze enchanting works like item drains where if it can not be enchanted, it just moves past it. So you can just put every tool through every enchant, then save the optionals for the end and have the enchanting for those be toggled like how you did before.

You could add an indicator below every enchantment that shows wich tools they can be applied on, and you should definetly add bow enchantments too. I love the idea of an automatic enchanter btw, great video!

If you feed items from a belt into a line of blaze enchanters, the item will jump from blaze to blaze, enchanting the item with the enchants that are able to be put on that item :)

↓ 5hr gang 😂

Use buttons with toggle levers (create adds them iirc) to latch the enchants. Once the item shows up on the depot, use a stock switch (if they don't work on depots, I think comparators do) to reset all the toggle levers. You'll need two sets of frequencies, one for the buttons to the toggles, and one for the toggles to the funnels. You can put another Redstone link on the back of the lamp tied to the same frequency to show whether one is active or not. There's ways to make it so the button can toggle on AND off, but it'd be a little complicated for a RU-vid comment lol. Just throw a reset button in that's tied to the same Redstone link as the output that resets it. Pro tip for organization, you can use minecraft items that represent the enchant (ie bones for smite, spider eye for bane, sword for sharpness, etc) for one channel of the frequency, and then set your other channel to represent what it does (maybe Redstone for source, blaze powder for output)

Thx Shalz! I got an idea for creating a create server and making this!

3 push up every like see you on sunday

Under ten minutes gang 👇

shalz, i love ur content! especially where it says printing book needs ink 😂

Nice vid Shalz!!! Just wanted to point out that you can use crushing wheels to also get the xp of a mob and what I like doing is using silverfish instead of spawners since getting and breaking infested stone is easy to aquire only needing to bulk haunt cobble or stone. 👍

1 push up for every like this comment gets see you in 2 or 1 day

This comment will get 29 likes 😢

Thank you for posting

To make the machine better, you could have a button on the lamps running into a nor latch that you take the output from to select the enchantments and light the lamps. Once the enchanting is done, you can have a final signal reset the nor latches

You could create a discount system where the price you charge for enchanting their gear goes down if the player deposits their xp into the system beforehand, depending on how much they deposit. I imagine the create observer-style block can track the amount of fluid going through pipes or into a fluid tank that acts like a cistern. There'd still be a flat fee for processing, but the part of the cost that is for xp could be portionally discounted, then.

If you want to do that in survival, you actually would really like to put every levelled enchanting (like sharpness, unbreaking and others) under an hyper-enchanting setup. It is possible to farm glowing ink sacs, for sure, with a glowsquid farm or a regular squid farm and a haunting setup (with soul campfires blowing at ink sacs), although I’m not sure if it’s possible to farm lapis. Anyways, beware of non-leveling enchantments (like mending or infinity) because they don’t work with hyper experience (because there’s no such “mending 2” or things like that), so you’ll need 2 enchanting setups. But once they’re available, you’re good to go forever.

shalz, just use the chunk loaders from the video "This Addon Fixed Create." and the mod was called"Create: Power Loader" also just use copper bulbs for the lights.

What you could do for automatic turning off is by making the enchantment choices T flip-flops and putting and observer underneath the pickup thing so when it gets a signal from the item arriving at the pickup it resets the T flip-flops

For the lever reset, you could add something that senses the tool has went through all the enchantments possible. Then once it senses that, it could deploy deployers to switch the levers off.

A way you could make the levers automatically reset is to turn them into buttons that flip a toggle latch. Then have a redstone link attatched to the funnel that feeds into the same circuit and toggles the latch again. The latch could be connected to the funnel and the indicator light so you'd actually see the progress of the item being enchanted as the lights turn off

i think everyone overlooked this, but the hyper experience serves as a new way to supercharge blaze burners.

Ink: *Exists* Shalz: Is this experience?

Always enjoying these videos,cant wait for more

you can use SR latches for selecting enchantments, push the button to set the latch (select the enchantment) then when the item is done, send the reset signal to all the latches. Cool stuff!

yooo another shalz vid! gonna be fun as always!

Loved the video @Shalz! Can't wait for the next video man! The reason why the Printer wasn't printing the Book (Ben) was because you still had it as an Automated Enchantment Set-up instead of a Printing Set-up. The Printer Needs Ink in order to Print Books and Liquid Experience to Print Enchantment Books. R/ThereWasAnAttempt Anyone?

Would like to see how you set up a payment system in create, its the thing my server would have needed. Also for the enchantment turn off system, you could create a T-flip flop for the button press and have the burner turn itself off with a comparitor... I love redstone

I am crying from laughter I adore the earnest mistakes and rolling with how goofy the mistakes can be sometimes cx ...also the shalz communities friendly roasting over the ink thing is irreplaceable lmfao. Me and my gf made the same mistake in our smp. Dont tell anyone cx

He literally said out loud that it consumes ink, and then proceeds to not know that it consumes ink

when shalz posts its a GOOD day

you can change spawners so that they spawn with the player much further away, which would help with xp. you can find wikis of mutually exclusive enchantments, for example: for swords, only sharpness, smite, and bane of arthropods are mutually exclusive. you could also build a button selector panel, which is much easier to reset (and only uses normal redstone), have a look at a redstone youtuber like mumbo or ilmango for something like that. looking forward to the completed build!

Shalz: look at printer and reads out loud " it need 5mb of ink" Also Shalz: "why are you not printing?" after checking the printer for the third time without adding ink

For reseting the levers you can probably make a system that uses buttons, but keeps the light on until the item is enchanted, whereafter the light resets

Definitely would build this on my survival. Regardless this is a good proof of concept

Use a latch for the lever resetting, you can make them buttons instead that way (specifically make it a toggle latch)

YEEEEEEEEEESSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!! SHALZ IS BACK!!!!!!! LETSSSSSSSSSS GOOOOOOOOOOOOOOOOO! (ur videos are AMAZING shalz, love ur content. been subed for 3 years now lol)

hey, an idea so that you won't have to reset the lamps every time; use buttons and lights and then just reset the "enchantment lamp" using a sensor on the belt behind it, also has the nice effect of showing you some kind of progress bar

12:54 You could use an rs nor latch for each input on and have the off input be a reset switch as a button at the beginning, and automatically when the item is detected at the end. jazziiRed has a nice video on the subject, and mumbo has an old video on it as well but it doesn't go into much detail.

on the signs you should denote the amount of XP needed for each specific enchant as well as any incompatibilities, you could possibly use a clipboard or lectern for such info

You could make a resettable Storage by using a comparator and a stuck clock (vanilla items). When you press a button on an enchantment, the clock "gets stuck". To reset the clock, you power the comparator from the side, turning its output off, breaking the loop.

I had a hell of a time making a shop like this on my server but for everything including armor and other weapons like the trident and crossbow

To copy signed books you need ink, not liquid experience. Hope that helps!

Button into a toggle latch for the redstone, set up a detector into a redstone link that's wired to those toggle latches to reset them when the item is finished enchanting.

You could use copper lamps and buttons when selecting the enchantments. the copper lamps stay lit until they get a new redstone signal.

You can generate XP with electricity with create new age and you can also print written books using ink instead of XP

You’d have to make the building bigger, but you could use buttons and redstone latches to make the lights stay on (and keep enchantments selected) until it receives a cutoff signal from the output end. It won’t affect the switches that are already off, so it would be an automatic reset. Just need to detect the item as it leaves the system and send a signal when that happens.

"we just killed a couple of sheep over here and put their xp into this fluid tank" Shalz 2024

maybe it would be fun to have some sort of progress bar at the top, just redstone lamps showing where along the track your item currently is

Brugh at 1:30 into the the vidio Shalz literally said Its Going To SUCK On It!!🤣

You can make redstone lock mechanisms for resetting and locking enchantments, you would need to use buttons for that and quite a lot of redstone, but I think you can make it work

You know, I kinda like the enchantment selector idea. Makes if feel like some kind of weird old Minecraft contraption.

you can actually read the XP requirements from the blaze thingies and show them on the board so like (this enchantment would use 1530/10000 XP available) and the number changes depending on your enchantment choice

I get so excited when I see a new video uploaded

> Sharpness 1 proceeds to pull out a sharpness 5 book

The only enchantments that are mutually exclusive are: the protection enchants, sharpness smite and bane of arthropods, mending and infinity.

Shalz getting absolutely destroyed rn with the amount of people telling him it needs ink

Now you need to make a maxed book factory that will print a book that can be applied to any item to fully max it out, or you could make a variation of this as items skip incompatible enchantments

bro "the ore" is genius thx shalz

love ya man keep making content

If you put a number of blaze enchanters all in a line with a belt putting items in and taking them out, then the enchanters will just transfer the item being enchanted from one to the other. It also will skip any enchantments which cannot be applied to the item

Another amazing Shalz upload

10:40 I use a mod that adds a scarecrow block of some sort or, whatever it was, that locks mob spawners to be on no matter where i am at anytime, this may also require a chunk loader to work constantly, and for those there already is a create chunk loader mod

4:18 number 2 of shalz oof moments.. LOL IT HAS TO GO THROUGH A BELT

I think some sort of toggle circuit would fix the switch issue, replace them with buttons that trigger a toggle circuit that gets reset after the item is done, (or if no player is detected for 2 mins?)

I like how the standard of liquid volume measurement in the create mod is in Buckets and Millibuckets

I think I remember there being some sort of block in base create called the toggle latch or something (a lever with a timed delay shutoff) if it works how I remember, that should work for your system