Your steer pump is shared with hyds so if you have all other functions but steering is not working your issue lies in the combination valve on side of pump. You have a small piece of debris( most likely rubber) stuck in the orifice of the priority spool in the combination valve( spool sits behind the relief u were playing with). Put finngers in and remove priority spool, put in vice remove grub screw type orifices in each end and clean out with brake clean. Dont just poke out the debris without removing orifices as the debris will just jam up steering again. All up takes around 1/2 hour to repair.
FYI Check the side shift cylinder nuts that hold cylinder piston on. As long as I can remember they had a issue coming loose from new. Seems like once we repaired them in the field the problem was solved. Seen several posts on youtube about the same problem in the past.
Thumbs up great score on the Grader, It has all the glass in great shape, that is rare, camera was working awsome, enjoy comin along on your adventures
I can definitely see the difference with your new camera , video quality is a lot clearer . If by chance anyone is looking for a pickup truck , I have a friend selling his 02 F250 , 7.3 power stroke , 4x4 , needs transmission , recently had new injectors installed . He's asking 3500.00 for it , located in Woodland Washington .
Are you going to check and see if that bad pump put any metal in the oil so that when you put the new pump on it doesn’t suck up anything and go out too? Great video thanks for sharing
Hey Quinton !!! ""CONGRATS"" on your ""NEW""/Used toy !! HAHA 👍👍👍👍👍 Where's Casey at as he could have ""FUN"" too with that ?? 🙂🙃😉😊 Is there an oil filter on that power steering pump ?? 🤔🙄 On the big rigs, it's in the oil reservoir for the pump !!!
