I Broke ALL the Rules - Putting Epoxy Resin to the Test

Подписаться 578 тыс.

Просмотров 1,5 млн

50% 1

I did an #epoxy pouring experiment where I #Casted 8 gallons of epoxy #resin on a single pour. This breaks all the rules of the epoxy manufacture's regulations. I poured it up to 11" thick, which is 4 times the amount stated on the label. How did I do this without causing an exothermic reaction? Watch and find out.
30% off promotion has expired.
GET 10% OFF MAS EPOXY ' DEEP POUR X' by using the code "blake" at checkout.
masepoxies.com/product/deep-p...
Other Supplies:
1. Mold Release Wax - amzn.to/39WaWMD
2. Silicone for Melamine Mold- amzn.to/3LOKvpF
3. Vacuum Chamber- amzn.to/38Ut8pM
4. Torch for bubbles- amzn.to/38Qfggn
5. Funnel with long stem- amzn.to/3wKWQXp
6. Temperature Thermal Thermometer- amzn.to/3lPkeN7
7. Chest Refrigerator/Freezer- www.lowes.com/pd/Whirlpool-16...
8. Drill Mixers - amzn.to/3GjgmNQ
9. Small Fan - amzn.to/3GjgCwi
10. Silica Packets- amzn.to/3z3aNSb
11. Black Epoxy Pigment- amzn.to/3lLLkVq
Want to commission a meaningful piece of art just like this one? Email me directly from my website: www.blakemcfarland.com/contact
Other Business Inquiries: Bmsculptures@influint.co
Follow me on all my socials - Instagram & Facebook @BM Sculptures
Visit my website: www.blakemcfarland.com/

Хобби

Опубликовано:

26 май 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 945

@BMSculptures 2 года назад

Do you do Castings or Deep Pours? Let me know what you guys have experienced and what you would do differently below!

@alinagoberman1827 2 года назад

Positive couple Chanel does some really thick pours.

@kelho46 2 года назад

Even though I never did any casting, I do work with composites and one good example is the way I make my own pre preg is simply by infusing carbon cloth with epoxy, keep it sealed inside the plastic layers and throw it in the freezer, it holds for at least one month and once at room temperature it cures normally, the negative temperature simply stops the reaction, also, one thing I would try in your case, would be connecting the vacuum to the inside of the refrigerator, and pray for it not to implode, this way it would be possible to pour the epoxy all at once without resting or vacuum before.

@hotmirror000 2 года назад

you are getting so much knowledge about epoxy, would be so great if you could do a video one day where u explain all the basics and important things if you wanna do it yourself!! Really love ur videos tho!

@imyaaniggua 2 года назад

cool it bevore mix

@brandonm9359 2 года назад

I got minimal casting/deep pour experience. But I have taken the product I use. To it's limits. I did put it in the fridge for a few days and it seems to help. Similar to what black forest use to do.they now use a cooled water table for there bottle castings and large table castings.

@NorthoftheBorder 2 года назад

Time to empty out the kitchen fridge, I guess. For real though, I think most of my projects cost 3-4 times as much money and double that in the time it takes me to remake all the things I screw up being overzealous with the deep pours. I'm glad to see a smashing success!

@BMSculptures 2 года назад

hahaha yeah, biggest thing for me was finding the Chest fridge allowing me to do such large pours. If you have some smaller scale projects a stand up fridge would work!

@segunbabalola2150 2 года назад

I will like to be your student sir

@jst1man 2 года назад

Hey buddy, Your stuff comes out amazing. Though a vacuum chamber is a good idea, sometimes I notice the materials don't always agree. To be honest if you watch what you are using 50% of the problem is solved.

@C1schecter101 Год назад

Dam you wasted a lot of money

@galvanizedgnome Год назад

@@segunbabalola2150 no. Go get a job.

@AdirondackRuby 2 года назад

That's the epitome of "modern problems require modern solutions" ...so clever! Can't wait to see the finished Rhino. Looking awesome already!

@BMSculptures 2 года назад

Thanks! Finished rhino should be done in the next couple of weeks

@lloydhall6943 Год назад

@@BMSculptures I keep getting messages to contact you on another platform, is this a scam?

@paintcandan5972 2 года назад

im never going to do any of this but i still watched the whole video just because epoxy resin is such an interesting material. very weird properties but the creative possibilities are endless! people are always coming up with new and unique ideas it’s so fun to watch.

@BMSculptures 2 года назад

Well thanks for watching!

@bumblebee2657 2 года назад

username checks out

@fpvgods Год назад

Hello Dan -- come on try it out

@shadowcard6923 2 года назад

The one with bubbles isn’t totally lost, you could drill for LEDs at points in the wood and use it to create a rain/snow scene

@InchFab 2 года назад

It'll still look like crap

@matthewglaze5398 2 года назад

@@InchFab that depends on your perception of crap vs creativity.

@InchFab 2 года назад

@@matthewglaze5398 I can't agree. I've fucked off many gallons of epoxy. If it's supposed to be clear, and it's full of bubbles, it usually yellows and cracks also. There's no creativity that can fix a bad pour.

@matthewglaze5398 2 года назад

@@InchFab what happens with a bad pour??? Unexpected color, clarity, bubbles, to me that just gives it unexpected character. Could still be beautiful just in an unconventional way.

@InchFab 2 года назад

@@matthewglaze5398 there is almost always more going on than just bubbles. Usually the epoxy cracks in random places, yellows, or deforms. Sometimes all of these problems at once. Otherwise, the bubbles just look terrible.

@peterlively8269 2 года назад

If you are going to do something like this, make sure you have a smoke alarm! In college, another grad student cured a large container of unused epoxy and filled the lab (and entire building) with smoke. It can start a fire and release toxic gases. I liked the use of the fan and the refrigerator, probably should have set the fridge temp a bit higher, rather than turning it off though. The manufacturer likely has a recommended curing temperature (for instance 8 hours to cure at 70 degrees and 16 hours to cure at 65 degrees), in which case aim for the low end of the curing temperature. Finally the boards will serve to insulate the epoxy, making this more dangerous. If possible, use metal as it will transmit the heat out more readily.

@scottfromspace 2 года назад

Can't wait to see the finished product! You're an amazing artist :o

@BMSculptures 2 года назад

Thank you so much... Working on it right now!

@dreyhawk 2 года назад

Wow...I'm so glad I found your channel! My son and I are interested in working with resin and I'm learning so much! Thank you for sharing your amazing talent and how it's done.

@nicholastautuhi5031 Год назад

I only do very small pours, but I learned heaps from this. Have lost a few really beautiful pieces of timber recently due to this heat issue, so thank you for posting this.

@zakkaryzoah1386 2 года назад

It’s fun to watch you experiment with materials. I like that you see limitations as opportunities. It’s a truly artistic way to see things.

@BMSculptures 2 года назад

Thank you!

@denverruff1024 Год назад

Amazing work brotha. I've done a lot of small pour stuff, and you've inspired me to work up to bigger pours and styles. Thank you for sharing. Amazing.

@Alakay77 2 года назад

What you're trying to avoid is called uncontrolled exotherm. The resin needs an exothermic reaction to happen, as the heat helps it to harden. You just want to control it so that it doesn't cause issues. I like how you used the fridge to do this. I'd be curious to see what would have happened without it! Can't wait to see the rhino when it's done! Thanks for sharing your process with us.

@Santuse 2 года назад

Hi, I have a degree in chemical engineering. There are a whole bunch of equations and software to do this sort of stuff. What this guy did was put an exothermic reaction in an insulated box. It's possible it got hotter there than just a regular pour. All reactions go faster as the temperature increases (but this includes the reverse reaction, so some reactions appear to slow but it's just the reverse speeding up). Thus, since it's exothermic, starting the reactants cold doesn't really change the peak temperature. Imagine lighting gasoline when its -30° out. Fire is still hot. So his fridge probably didn't do much. What I would do is to have an ac on it or in a walk-in cooler, or any type of cool breeze.

@Alakay77 2 года назад

@@Santuse Interesting! I was wondering about whether the amount of time it was initially cool for actually impacted the reaction, so you just answered that. What do you think stopped the epoxy from cracking? Would that be because it was insulated and it didn't have as rapid of a change in temperature as a result?

@martyjehovah 2 года назад

@@Santuse starting temperature definitely matters when it comes to epoxy resin cures, that's why all manufacturers have recommended operating temperatures. A resin pour this thick in a 30 degree room would without a doubt have smoked, sputtered, warped, and hardened extremely fast, while a pour 3 meters deep at -10c would possibly never cure, and if it did it would take months. It's true cooling it doesn't make the reaction release any less energy from beginning to end, but it does extend the timeframe which keeps the reaction from running away as it heats up unchecked, and eventhough the refrigerator is an insulated box it's not keeping the heat in, the refrigerator by its very nature moves heat out of itself. The relevant petroleum metaphor is more like the difference between lighting 1 litre on fire in a room, or lighting 1 litre a thimble full at a time in the same room... the same amount of energy is released, but 1 of those scenarios is going to be a lot more scary.

@liaca27 Год назад

@@martyjehovah Do you have any recommendations to improve upon what he did ?

@robb.2957 2 года назад

For you partial paste wax application, add a layer and buff it off. Wait 5 minutes and repeat 2 to 3 times, or more if you find it's having trouble releasing. The buffing off is key. It seems counterintuitive, but it makes a big difference, and you won't have a residue on your part after you pull.

@petergledhill7380 2 года назад

Great video and amazing sculpture. One tip I use is to thinly precoat the wood with epoxy before using in a deep pour. This stops any bubbles being created by the exothermic reaction with the wood

@rachelwalsh1388 2 года назад

Peter Gledhill ~ now thatsounds like a great idea, it makes a lot of sense when I imagine it in the making process.

@thomasmcfeely8869 2 года назад

That's totally AWSOME. I worked in a fiberglass pattern and mold shop when I was younger and the variables we had to overcome were outrageous. I saw you put the packets in for moisture. My tip for that is condition the room air also. An air conditioner keeps the relative humidity fairly low and constant. I wouldn't doubt if barometric pressure could effect it. Best of luck, love the Rhino. Maybe I'll give it a go again.

@felixhernandez9354 2 года назад

I have multiple projects that are a learning lesson! And this video just saved me some time and more lessons! Thank you so much for sharing

@artistic_spaz3724 2 года назад

That is definitely the deepest single pour I have seen anyone do successfully. Great job thinking outside the box!

@BMSculptures 2 года назад

Thanks so much 😊

@cheyenne1082 2 года назад

technically, inside the box *da da tssss 🥁*

@mikaylawendel9769 2 года назад

Wow... the rhino already looks awesome! Sadly, I don't know much about epoxy so I can't really be of any help, but I definitely want to experiment with epoxy in the future so thank you for creating this video!

@BMSculptures 2 года назад

Well thanks for watching! Rhino should be finished in the next couple of weeks or so!

@nenaelliott8058 2 года назад

Thanks Blake, I don't work with resin but have a lot of friends that do and have had problems with deep pours. I'll pass this video along. They'll be excited to learn something that works. Thank you.

@BMSculptures 2 года назад

Thanks Nena!

@RayMrRobert 2 года назад

That vacuum chamber is what I’d call essential for all pours, not just deep pours. You were right. Cooler temps avoid abundant exothermic reaction. I’ve poured a lot of acrylic and you aced this. Beautiful sculpture.

@mattcochran9236 2 года назад

Love the channel! Have you thought of putting straps under the form before you pour the epoxy and mounting some kind of pulley to the ceiling to get it out when it cures?

@BMSculptures 2 года назад

That is a fantastic idea.

@bradschrock3163 2 года назад

@@BMSculptures only thing to watch out for is hanging it off of standard wood trusses. Bottom chord of it may not be rated for the weight of large epoxy pieces

@microchrist6122 2 года назад

Stoked for the Rhino

@BMSculptures 2 года назад

Soon!

@keithhiscock4011 2 года назад

I've seen your sculptures on art related sites, beautiful work.As a painter myself its great you give an insight to your process

@locomotioncreations 2 года назад

Great video Blake! Glad to see the lessons you learned and success that you had doing these tests

@BMSculptures 2 года назад

Thanks!

@Jasonsix4 2 года назад

The rhino looks great already & cannot wait see the video. You could have a block & tackle set up, put the straps down prior to placing your mold in etc. this will save your back (you only get 1 back)

@BMSculptures 2 года назад

That is one great idea!

@_john_doe_ 2 года назад

As another epoxy user, all the tips was great pretty much the same advice that I give myself. Might give you a bit of a warning concerning freezers/refrigerators, they are not made for continues use and will brake if they are running all the time and well it won't be nice if they brake down during a large casting. Think I've seen industrial coolers that made for continues use however. Looking forward to all the coming carvings, keep up the great work.

@BMSculptures 2 года назад

Im not sure I follow? Dont all frigerators/feezers continuously run? Once they reach the set temperature I realize they stop until it changes. Am I missing something?

@_john_doe_ 2 года назад

@@BMSculptures Oh, sorry for not being more clear. Blame it on English not being my primary language and not being a refrigerator expert, and definitely not for being too lazy to see that it wasn't well written. ;) So to correct myself. A freezer/fridge is made to be "used continuously", but the compressor that creates the cooling is not made to be run continuously. In normal use cases, the compressor only starts when the temperature goes above a set value and then turns off again, just as you said. But if you then put something that generates continuous heat, the compressor will have to run until heat no longer is generated, which makes it run for longer than what it was designed for. Think the term used is duty cycle, if you want to look into it more.

@_john_doe_ 2 года назад

Might also say that I think it's fine to make off-label use of them, but then you should be aware that they are not made to be used this way and have some kind of safety measure if it fails. I also have off-label use of a freezer, but in my case, nothing critical happens if should fail. ;)

@JesperMakes 2 года назад

Mandatory viewing for all epoxy woodworking makers out there. Even if you don't do massive deep pours theres still lots to take away from this video. Great testing and explaining. that's the quickest sub from me ever. Cheers from Denmark

@BMSculptures 2 года назад

Thank you so much Jesper!

@TheMidLifeCrisis817 2 года назад

Wow just came accross your channel this morning and you do some incredible work! Can't wait to see some of your other pieces.

@daylen577 2 года назад

Surely there has to be a way to calculate the amount of energy generated for the volume of resin, and then a way to tune your fridge to take out exactly that same energy, balancing out the rise in temperature without stopping the reaction? A more scientific approach to this would be very interesting to see

@TheBigWizzard 2 года назад

I think embedding a thermometer in the resin and using that with a controller to keep the resin at the right reaction temperature might be best. The problem here seemed to me like the fridge was to efficient

@graemepatterson 2 года назад

@@TheBigWizzard but then you'd have a big hole in the cast......

@TheBigWizzard 2 года назад

@@graemepatterson i think a few cm deep hole into the outside of this giant block won't hurt :D

@FrenkieWest32 2 года назад

@@TheBigWizzard a few cm of the outside of a giant block isnt going to be the same temperature as the middle

@FrenkieWest32 2 года назад

This would be very complex. Neither the block nor the fridge will have homogeneous temperature and the heat conductivity between fridge and resin is also difficult to know.

@cerealphobe8440 2 года назад

If you pour with the opening at the top of the jug instead of the bottom (so it pours past your hand instead of under), it'll come out faster and smoother and not "glug" as it comes out. Less bubbles :)

@jonlassak1141 2 года назад

That's a good tip! I learned that a few years ago for pouring oil in a vehicle.

@rcisneros8567 2 года назад

Wow. I love how this guy combined DIY and art. Beautiful. Subscribed.

@RoarTheRapper 2 года назад

Resin pouring is something I’m really fascinated to try. It looks like the possibilities are endless!

@BMSculptures 2 года назад

There are so many possibilities

@AdrenalineTheory Год назад

This has been done and you can use any chest freezer by just adding a temp controller. That allows you to only have it kick on at whatever temp you set. You can avoid all the issues you faced this way.

@SynergyAVE 4 месяца назад

His unit had a temperature adjustment. How could he have avoided all the issues if he did not know what temps to set the unit at? It was an EXPERIMENT.

@AdrenalineTheory 4 месяца назад

@@SynergyAVENot the same thing. Also, you know what yemp based on what epoxy you use.

@seeps9353 2 года назад

Those units are "air tight" meaning making the whole fridge into a vacuum chamber is possible... at least enough to run it at the end to help with air extraction.

@BMSculptures 2 года назад

I will look into it. Not sure if my pump would be large enough.

@rthomp03 2 года назад

If you vacuum out most of the air from the fridge, that will dramatically decrease the cooling (and likely damage the fridge). Without the air convection, heat will no longer transfer from the epoxy to the fridge coolant system. You'd be much better off doing the vacuum chamber before pouring rather than trying to combine steps. Also note that most refrigerators aren't rated for continuous duty. If it has to run continuously for several days to keep the epoxy from thermal runaway, you're probably going to burn out the coolant pump much faster than expected, and that would not be covered under warranty because the owners manual will specifically warn against it.

@ianthomas3653 2 года назад

@@BMSculptures Don't try that. The fridge isn't air tight, but even if it was a vacuum like that creates a ton of negative pressure and when it goes wrong it implodes then explodes. I have seen it happen and its violent.

@bjbenterprises 2 года назад

Very bad idea. A fridge is not built to withstand vacuum pressures needed to effectively degas the epoxy. See Mythbuster's rail-car imploding experiment for a visual example.

@JakeWitmer 2 года назад

You've helped me in my understanding of the boundaries of the process. Thank you!!!

@JeanMarvin2000 2 года назад

You are truly a MASTER of art !!!! These sculptures are a insane. I get so much euphoria of looking at them. Thinking about how much work this is to make them scares me.

@BMSculptures 2 года назад

It scares me to. Been going on a full month on this rhino. It is almost finished.

@AtomkeySinclair 2 года назад

The bubbles in the 2nd try would look excellent throurgh the lens of a curved surface because they would warp with respect to the observer's movement if you had a lathe that could handle turning it into a cylinder.

@SmEiF- 2 года назад

led lights in the right area would also look good in it. city sky,

@samahsaeed1261 Год назад

I'm happy that I watched this, I always trying to do more with epoxy and I have many what ifs in my mind and I think I've checked almost all of them, awesome

@melindaostergren8115 2 года назад

I really appreciate that you asked viewers their opinions of music or hearing you talk. Hurrah for narration!

@BMSculptures 2 года назад

hahaha Glad you liked it!

@dave61242 Год назад

Recently found your channel and you always amaze. I am inspired to try this myself once i get a shop set up.

@denisfilion-je3mw Год назад

Hey Blake, Great video. I haven’t done any epoxy projects yet. I’m just watching videos so when I do start experimenting I will have a good base. I have a million things I want to try. Unfortunately I don’t have your talent to be able to do great carvings. Im glad I saw your video. Your one of a kind and inspiring me to start creating sooner than latter. I’ll be checking your other videos for sure. Thanks man…

@bigrockets 2 года назад

I love watching you carve sculptures!This great and thanks for all your advice!

@BMSculptures 2 года назад

Thanks! Rhino should be finished in the next couple of weeks!

@BetweenDreams999 2 года назад

I love your work!! I don't plan on doing any resin work.....I just find it very interesting and you do fabulous art with it!!! Thanks!

@BMSculptures 2 года назад

Thanks for watching Karen!

@tracybowling1156 2 года назад

First, you are learning a ton and teaching what you learn is the biggest gift you can give a person. That's how I feel anyway. I cannot wait for the rhino. I do so enjoy your videos. This one was excellent! Oh, and Happy Memorial Day Weekend! ☺️

@BMSculptures 2 года назад

Thank you so much Tracy. Happy Memorial Day weekend to you and your family as well!

@44Paws Год назад

Blake from BM sculptures... You do absolutely astonishing work 😍 Amazing! Love and blessings, from Vancouver Island, BC 🇨🇦🐾

@GDaddyTx 2 года назад

New subscriber, can’t wait to see how far you can take the new deep pour. Thx for sharing.

@roskoeheat 2 года назад

I worked in plastic fabrication for 10 years….that’s beautiful work man! A+

@renegomez6173 Год назад

Very helpful tips regarding letting the epoxy sit in the mixing bucket before pouring

@namnack 2 года назад

Thoroughly impressed by your art and uploads. Can't wait to see this latest project finished. Subbed!

@BMSculptures 2 года назад

THanks! Should be finished in the next couple of weeks!

@JamieBainbridge 2 года назад

This is the way to do it, great experiment and findings. Maybe you could attach hooks to the outside of the box or ratchet straps underneath the box, lift it out with an engine crane. Especially if you do a bigger pour.

@andrepastor4844 Год назад

That’s some patience, can’t rush a good thing well done.

@lloydhall6943 Год назад

Thanks pal you just extended my creativity

@charmio 2 года назад

I got halfway into the video and literally had to restart once I realised the guy really knew his stuff. Good tips.

@GG-cn6es Год назад

Same as painting. A lot of people get discouraged when their paint scratches off the next day. You gotta let it cure for a week or 2 before it really hardens up.

@TigerCarpenter 2 года назад

really cool tips indeed! I live in tropics where the temperature is 36C = 97F all day long, and at night it drops few degrees. I never needed to heat up the epoxy pours, I have no bubbles whatsoever. the 12 inch deep epoxy pours are bubble free, fractures free, and despite of me having no experience, it worked as a charm from day 1. also after 24h or even 20 hours, the epoxy is pretty much cured, and I can start using tools to shape it

@johnhall9609 2 года назад

I have done small like poker tables or night stand type table!! And I used glazed coat and I found out ,it cures a lot faster for something like a one inch thick pour ! If it’s room temperature!! And I also did a table in the winter time, and it wAs like it didn’t wanna cure up at all!! But it’s a totally different type of epoxy!! But it works well!! I have never done a thick pour like yours!! Cuz the epoxy is so expensive!! Lol … but I believe I’m gonna try a thick pour cuz u gave me ideas!! Thanks for sharing your video!! Love the walnut burl!! God bless everyone!!

@gustavcarlsson6090 2 года назад

Very interesting and thanks for sharing your lessons learnt. I really happy that it worked as you hoped. Game changer! The rhino looks awesome 👍

@BMSculptures 2 года назад

Thank you so much!

@kfu4657 Год назад

Absolutely Phenomenal. Game changer for sure. Awesome video.

@cricrisuper4676 Год назад

Breaking the rules!! Including those about moving a freezer! That's dedication! : )

@franksmith7235 2 года назад

I love watching your videos and seeing the finished product. Your sculptures are truly beautiful. I have an idea for getting your mold out of the fridge. Next time lay down some heavy straps under the mold and use them to lift it out. Hope it works.

@BMSculptures 2 года назад

Thats a great idea . Thanks!

@papaduck459 2 года назад

Having worked with many times of epoxy from quick cure to deep pour, what you touched on here is EVERY epoxy maker's worst nightmare. I remember doing a deep cast and the exothermic reaction was so bad that my cast ended up looking like a faux tray of ice cubes. My wife asked me why I was making epoxy ice cubes with a snicker in her voice. Lesson learned at a costly expense to me.

@BMSculptures 2 года назад

hahahaha yeah its the worst

@SkewToob 2 года назад

I've done deep pour castings and I've used the fridge to slow down their curing. I haven't tried it yet, but I believe that coating pourous items you plan to cast with an epoxy topcoat would go a long way toward removing bubbles from those castings altogether.

@BMSculptures 2 года назад

Yes absolutely. I use penetrating epoxy for that. I should have mentioned it.

@cmv981 Год назад

You are an amazing artist!! Beautiful work ❤

@ColonelSandersLite Год назад

One thing I would suggest - Look into those temperature probe setups that are geared towards smoking meat. They have them such that they can have 4 probes simultaneously with wireless display unit that you can read from anywhere in the building. Put a couple of probes inside the epoxy itself in locations you intend to cut away anyways. Hook the freezer up to something that will let you control the power supply. This would let you monitor the epoxy's actual interior temp and adjust the cooling as needed without having to open the freezer up. The probes would *probably* end up being consumed in this sort of application but *maybe* you might be able to retrieve them in the end if you wax them.

@Bloktarino 2 года назад

quickly becoming my favourite YT channel. The Rhino is going to be insane!

@BMSculptures 2 года назад

wahoo! I appreciate it!

@MsSandraCGL 2 года назад

You are so talented, enjoyed this, a ton, thanks and for this and thanks for the next one, I can't wait!!

@BMSculptures 2 года назад

Thank you so much!

@DaveGDesigns 2 года назад

I’ve used a fair bit of resin in my own pieces and I really like alumilite amazing clear cast I’ve only just got some of the deep pour to try out but using the ordinary epoxy I’ve had great results casting up to 8l in one go despite what the instructions say I can’t wait to see your rhino finished your work it’s amazing 👌🏻

@BMSculptures 2 года назад

Thats amazing. I wonder what the temperatures were when you did those pours. Should be finished in the next couple of weeks!

@RicardoIlardo 2 года назад

I couldn't say which is better: your technique, your art or your sense of humor 😂

@BMSculptures 2 года назад

Great question.... They are about the same amount of time- around 10 days to fully cure, however when pouring in layers, I am CONSTANTLY checking on it, torching bubbles, not to mention dust build up between each layer. This method is pour it and forget it! So much better.

@robthompson8285 2 года назад

Bro, you are the most amazing, most original user of epoxy resin I've seen on RU-vid. You do shit with resin that I didn't even know was possible. Awesome video. Thanks for pushing the limits for us!

@BMSculptures 2 года назад

haha Thanks Rob. Always trying to get better and better

@jeffbaker655 2 года назад

That Rhino is going to look beautiful Blake,great work, all the best from Australia...

@jamestregler1584 Год назад

This confirmes my thoughts on this process ; thanks 👍

@richpaulson6301 2 года назад

WOW!! THAT IS SO COOL THAT YOU SHARE WHAT YOU LEARN. GID BLESS YOU AND KEEP UP THE GREAT WORK

@BMSculptures 2 года назад

Thank you, I will

@sallyfoote2035 Год назад

Crazy epoxy resins how strong testing it’s and how you put it inside of your own home right now 😱😱❤

@adrienbastarache8096 2 года назад

I watch a lot of videos of resin epoxy and you are the master ,i subscribed some time ago ,hit the bell and like every videos.

@BMSculptures 2 года назад

Thank you Adrien!

@kalanikim540 2 года назад

Great work!! Thank you for sharing and educating us!!

@BMSculptures 2 года назад

Thanks for watching!

@rachelbernhard3334 2 года назад

Really valuable information, thanks so much for sharing. Your talent is on another level 🔥🏁

@BMSculptures 2 года назад

Thank you so much Rachel!

@SICresinwrks 2 года назад

You always have great advice and do phenomenal work!!

@BMSculptures 2 года назад

I appreciate that!

@CLove511 2 года назад

"Just need another day to harden up" So much more graceful than "I swear this never happens"

@BlackCat_2 2 года назад

Very cool! Thank you for sharing. I hope you will still use that piece with bubbles. Sometimes they look cool. That rhino looks great! Heidi

@OrangeRauy 2 года назад

Seeing how regularly and finely the bubbles are spread inside the second experiment, I think that could still make for an interesting and beautiful sculpture.

@BMSculptures 2 года назад

I agree. I will turn it into something in the near future!

@l9jjp 2 года назад

Amazing work of art . A very talented man. awesome work

@chandarussell 2 года назад

Very interesting. Although I’ll never use epoxy like this it has answered a lot of questions I’ve had about it. I can’t wait to see the video of the rhino.

@BMSculptures 2 года назад

Thanks Chanda!

@douglasfathers4848 2 года назад

Hi Blake, Mate I'm never going to do any epoxy casting. But I'm also not going to miss watching you mate . Love your your work . Cheers. 🤠🦢🦅🦏👍

@BMSculptures 2 года назад

haha Thanks Doug! Where is the bear emoji!??

@stefanitadio6236 2 года назад

Fascinating! I've heard of the exothermic reaction but wasn't 100% sure what that would looke like. I appreciate the examples.

@BMSculptures 2 года назад

you betcha!

@ssparadise6840 Год назад

I love how you say "insert jokes below" and there are no jokes!!!!!!!!!!!

@Ghostiification 2 года назад

I watched your video of making the whale sculpture and had to instantly subscribe to your channel. You are an amazing artist, and I'm going to have good time watching your previous builds.

@BMSculptures 2 года назад

Thank you!

@alexto1 2 года назад

Not sure if this has been asked before: how do you clean the funnel after the pour so that it's usable for future pouring? Thank you so much for sharing this!

@alachance2010 2 года назад

Hey so get a temperature switch and you can put it in the freezer so it will turn on above a certain temp. This will allow the reaction to happen at a target temp and not have to manually monitor it.

@rabooey 2 года назад

You've just discovered the way to create plastic party goblets. Brilliant!!

@theSimulist 2 года назад

Bowel Movement sculptures? That is a new one for me!

@themicdfiles1865 Год назад

That’s a crazy pour! I have the same buffer and use butcher block oil all the time. Dude, 17 gallons for two pours? That’s a lot of money.

@accordionchick Год назад

Very educational. Much appreciated. I just got done doing a piece that was perfect til the final pour and then I got lots of cracks and volcano bubbles. Totally ruined my piece. Had no idea about the exothermal thing. I’m scared to do any more big pieces. $$$$$$$$$😮

@3613jeremy Год назад

I love these epoxy carvings and furniture

@scottwarner1733 2 года назад

There's another RU-vidr that I follow called "Positive Couple" out of Russia. He does a lot of very deep epoxy pours and doesn't seem to have any issues with bubbles, etc. He doesn't even use a vacuum chamber. The epoxy is made locally and is almost water-like and takes about 7 days to cure. I doubt the product is sold in the US but thought it was worth mentioning. Love your work, thanks for sharing!

@BMSculptures 2 года назад

I have actually been following them for a while now... Unfortunately if you pause the videos and zoom in you will see a lot of the time there are fractures ad bubbles throughout their large pours... I study their videos A LOT! They do some amazing work.

@dwaeton100 Год назад

the bubbles make me think of a snow globe that could make for a really cool sculpture

@krishigajjar9116 2 года назад

Great work excellent work 👍 loved it keep it up man.

@Sickzero Год назад

If you could add small lights in the wooden parts of the bubbly pour it might look like a rainy skyline! I really like your work.

@justiniddings2957 6 месяцев назад

Great idea getting a fridge/freezer! Too bad you can have it as your vacuum chamber as well (or maybe you could). I did a deep pour (5inch) and since it was winter time, put my resin outside over night, and let it cool. Brought mine inside after 1.5 days and it was tacky, let sit for the rest of the night, and was ready to turn on a lathe after only 2 days total. Great video, great looking Rhino!