I built a very big wrench 

His whole response to new handles is going to be blurred with all the phalic grips. lol

Have to make it comfortable so he is conflicted about not using it. 😂

I immediately wondered when he asked for grips how many people were going to buy sex toys and dremel out the hexagon shape for the grips.

My first thought when he asked for grips was the number of male knobs he might get.

Damn it time to hit the drawing board again

Ummmm… they’re boyfriends

Cameraman Kev

While wearing the shirt for a 3rd successful youtuber.

lol your right!

​@@b0inGywho's shirt is it?

I was about to add one to the collection but now that he's mentioned it I know I can't be the first; just not enough practice I guess

Yup, I was sure I wasn't the first one to think about that. Ah, the male mind.

I too want to post "inb4 a mailbox full of dildos". The next video in this series is going to get demonetized for sure. We should buy some merch to offset that. . .

Would be funny if he would get a perfectly shaped and comfortable grip however it has phallic shapes carved and painted all over it.

Yep thought the same thing

What an insightful bend of the rules

so an among us one is inevitable

@@The_Lamp1My thoughts exactly :D

I thought you were joking XD

Off brand morning time

He was pretty torqued off

YOUR NOT PART OF THE TURBO TEAM

Which reminds me of Torque (2004), which was one of the movies of all time.

After 7 pumps I need 5 minutes, a Gatorade and a cigarette.

Ass torque

Isn't the whole point of making something like that out of steel is that you get to pound on the metal to get your frustrations out?

That’s gonna be heavy as fuck

@@gregw1076 normally yeah! And it does wonders haha. But I was stuck needing to finish the electronics for the LED chest plate display before I could move onto bashing more metal. I think I'm over the worst of it now though. The rangefinder moves and most of the chest LEDs work

@@l4gging4days43 You'd think so but it's not actually that bad. I've done a few conventions so far in steel mandalorian armour and it's not until the 5 hour mark where it takes a bit of a toll. The latest set of armour I'm working on looks better and has more details with metalwork and electronics, but it's not going to be any more heavy

Eyy yes this guy knows! Torquing doesnt always stay either, seen so many vibrate loose and self destruct. Just smother it in red and send it home with the biggest impact you got and shes good haha.

@@sharkbaitgaming dont forget to slap it twice and say "that's not going anywhere" the previous person who worked on the excavator probably forgot to do that as well

Also, I've seen a lot of farm repairs where they just peen a couple threads over to stake the nut, or a couple tacks of weld to hold it in place. Leave it to an engineer to overthink things, though.

@awesomestuff9715 Thats the #1 cause for most Hydraulic Failures. I guarantee he didn't give it the final slaps.

Look if two men and a torque wrench and loctite can't keep it on, 1000lbs of torque never woulda.... Lol

Its surprising easy sometimes. Ive gotten more and more into repairing things (some simple, some complicated) over the years and sometimes you just have to take a long look at it to find the problem. Sometimes its a quick solder or new bolt or just grease. Most ppl throw everything away these days the second it stops working. Lots of free shit out there you can fix up yourself and spend little to no money on!

PS You WILL occasionally break something even more, but theyre good mistakes to learn from.

Maybe your dad can do a collab with Big Willie

@@jcangelosi1809 the idea of that is hilarious but I appreciate and respect Will’s unbroken spirit too much.

Nah he probably is just doin that

the goal was chaos aint it?

He talks about it in an Onlyfans video.

@@George_vv a... what?

The end goal is to become a redneck

Why would you need to rebuild the whole engine? Do worn piston rings imply that the cylinder bores would need refinishing?

@@bigchooch4434 You might be able to get away with new rings but more often than not the cylinder bores have kind of machined themselves to the rings and they'll chew up any new ones. And at that point why not reseal it all and get rid of any other problems you might have

@@aidanbotham442 exactly. tearing the entire engine apart completely is the biggest hastle, and to not send it to get machined is doing yourself a massive disservice. in my experience as a mechanic, the cylinder walls are usually the ones to cause this due to cavitation and poor air quality (which makes them rough and in turn ruins effectiveness of the piston rings to keep oil out if the combustion chamber) especially a school bus that is running everyday for hours in city traffic, they usually get beat up pretty bad internally (always running and schools not having the budget for proper/consistent services such as changing oil, lube and fuel filters, and air filters (which lets sand and dust into the combustion chambers and causes what i previously mentioned) so getting it machined, maybe bored out a couple thou with better pistons seems appropriate. but this is a school bus they bought as a gag, so just refilling the engine with oil as needed should work for them lol

"If it isn't burning oil, it doesn't have any"

Have you seen how the engines are mounted in this thing? it would be SO MUCH WORK to pull the engine. Half of it is in the cab 😅

69% of them will be dicks.

Is digging a hole not mental health related?

Boring nerd thing or BIIIIIIIG wrench? I think the winner is obvious

yea leverage is way cooler than gear ratios

Chad Archimedes has entered the chat

Hidden boring geared thingy or LOOOOOONG boi? Long boi is funner (and also a bit more dangerous, naturally 😈)

uhm... this IS a torque multiplier

lol i thought this said "his wife and I" (as in Will's wife) and i was laughing like a jackass

New feature, calm down

@@The_Oddocto this is lifechanging information

we all know he gets atleast one set of dong shaped grips....

It's gonna be a penis or something phallic in some way.

He can just use the extension without the wrench…

You are kind of right but kind of wrong. Torque does multiple with leverage (after all, look at the units; torque is literally a force multiplied by the distance from which it acts), but it doesn't multiple the way William stated in the video. Let's say his torque wrench is 2ft long. When the torque wrench indicates 200ft•lbs, it means he applied 100lbs of force at the end of the 2ft wrench. (2*100=200) Now when he adds the 5ft breaker bar, it only adds to the distance that the force is acting on, but the force is still multiplied by the total distance, so the 2ft wrench plus the 5ft bar would be a total distance of 7ft, and with a force of 100lbs, that would make the torque at the nut 700ft•lbs. To make 1000ft•lbs of torque at the nut, William would have to apply 143lbs to the end of the wrench, which would mean setting the torque wrench to 286ft•lbs.

@@jsax01001010 yeah, you are right and I was wrong. Ended up drawing the free body diagram last night and talking to some friends. It's a good assumption trap this one.

@@hadesbearer You were still right to say that he didn't make 1000ft•lbs at the nut, something that I didn't see any other commenter point out. Torque wrenches in general are a pretty good assumption trap. Most torque wrenches aren't directly measuring torque; they are generally measuring some property related to how force is applied to the handle which is used to infer the torque at the fastener. If you change anything related to how force is applied to the handle or how it's transferred from the wrench to the fastener, it can significantly alter the applied torque versus the torque indicated by the wrench. A common mistake when using torque wrenches is choking up on the handle or pulling with a second hand further up on the wrench. This will overtorque the fastener beyond the torque set at the wrench.

@@jsax01001010ouh nice comment. At least he was safe to not over-fasten it I guess. Another common mistake is to use some sort of extension because it’s easier to apply the torque on the big boys.

because he can get them for free by telling people not to send them. Bonus, they'll be dicks.

@@JD2jr. As funny as that may be, a dick is a pretty ergonomic shape all things considered. The knob is much easier on the hand than a tennis ball.

I feel like his second channel now is what his main channel used to be like before the fire - same chaotic energy and working on random stuff, just with farm equipment rather than a laser cutter.

It's rude to say that about Kevin

Came to the comments hoping someone would have translated cuz I don't...

@@LS-jj4sy like balls in an asshole

That's rude, you gotta tell him to distill his sweat into a cologne to sell on the internet