I Couldn’t Get It Started | Paccar MX13 

Leave the dome loose and work the priming pump until it starts to dribble, the tighten it down

Happy Belated Birthday Jorge!!!! God Bless you brother!!!

Happy birthday Jorge!! And many more to come God willing!!🙏🙏

43 again? That’s 4 years on a row!!! 😂 Happy birthday my brother. May The Lord bless you today and always.

Happy birthday brother.. safe travels!

When you change that filter you are supposed to click it into the cap not insert it in the housing. As a mechanic i appreciate you not over tightening the cap. Then you pump the primer 120 pumps. Then start the engine and let it run for 10 minutes before shutting it off. Also the truck is equipped with starter overheat protection. Normal on most new trucks. It lets you crank for 30 seconds then enters a starter cooldown mode and wont let you crank again until the starter cools down, usually 3 minutes.

You’re videos are so pleasing. Keep on trucking sir!

Happy Birthday buddy!! You seem like a genuinely good guy 👍🏽🙏🏽

Happy birthday Jorge .... Safe Travels and enjoy Christmas with your family !!!!

Happy birthday Jorge stay safe out there 🎁🎂🎉🎈

Happy Belated Birthday Jorge!!!

Happy Birthday Vato be safe I hope the present comes in handy for you one of these days.

Happy Birthday Brother.

Happy Birthday !!

Hey man happy birthday Keep On Truckin let's hear let's hear that long horn sound of 18-wheeler and many more

Good job, mate, Have a Happy Birthday ,also.

‼Happy Birthday 👍😉😀

Happy birthday fella. Christmas present idea for your pops, get him a new socket set.

Happy birthday

Ayyyy I’m a December baby aswell happy birthday bro!!!!!! Que tengas un súper chido weekend

Feliz cumpleanos many more

Cool stuff man 👍🎂

Happy 🎂 🥳 🎉 🎈 🎁 🎊 birthday

As having senior crew chief lube technician title. You should definitely NEVER put the filter in dry, pump up the fuel level in the filter housing it will remove the air bubble that made your truck shut down immediately after you changed the fuel filter. And it will remove the strain on your starter and fuel pump. As well as not running your cylinders dry.

Happy birthday buddy. You should feel 21 since you did that Christmas tree workout the other day 😂😂.

Happy Birthday!!!!

Happy birthday 🎂 🥳

First off Happy Birthday to you Jorge second I don't know what you've done to hot chocolate, but she's been getting real finicky brother. 😂😂 she needs a day of pampering like a wash and wax...lol 😂

First comment - When you crack the filter and you can see the O-Ring, stop and wait. As long as you do not have the blend valve it will drain the fuel back and you could avaoid spinning too much fuel. Second comment - Asphaltenes can make your filter look bad, you can not determine fuel filter life visually. Third comment - Always use a 25 micron fleet guard filter, NEVER anything else....trust me.

Happy birthday 🎉🎈🎉🎈🎉🎈🎉 🎈🎂🎂🎂🎂🎂🎂🎂

Happy birthday keeping on trucker n keep american move

Happy birthday Jorge

Happy birthday Jorge birria tacos@105 🤗👍

notice you don't have a bleeder nut on the top two nuts on the fuel rail. you can purchase it at a dealership. HappyBirthday drava

Yupe i knew u mess up soon as u got a small cup then started it up. Gotta fill that filter with diesel, pump it till its hard!!!! Then start it Bleeding that water Separator fuel filter to add fuel, u just took bad fuel and added to the new filter if u didn't bleed it first As for the starter , i ran into that problem trying to start it for a long time. Happen to me when I didn't know all my fuel was on the right and no fuel on my left tank which is where it pulls to feed the beast. Check engine light just saying fuel issue and possibly air in the fuel lines Note: anyone that never change a fuel filter on thier own and wanna try it please do it at a TA or loves parking lot. Just in case I see G's wish came true . He was saved We all live and learn something new everyday. Safe travels 🙏 man

Happy belated birthday

Happy birthday 🎉

Happy late birthday driver 🎈🎁🎂🎉🍺

Happy day bro

If you have to manually prime with the pump, crack the nut on the fuel rail at the #1 injector (the front one closest to the radiator) and pump until fuel flows out solid. Tighten the nut and the truck will start tight up without throwing codes. Got this tip from Koon Trucking on a video they posted changing a fuel system part.

Don't know if there same but on the paccar engines here in the uk there is a inline filter under the priming pump at the side of the main filter. If you unscrew the primeing pump it's underneath that.

Hap Bday ole son!! Always pump 100+ times before cranking!!!

My guy didn’t prime the system 😂🤣🤦🏻‍♂️

Happy 43 from Bryan,Tx

After fuel filters change no start up that means rear lift pump unit pump is not working and also one bad injector

I would highly advise not to take fuel out of the bottom of your fuel water separator because all the sediment sits at the bottom of that filter and you just stuck it in the new clean filter

Yea the fuel pump is a gear pump so how do you get the fuel to prime up when the fuel bowl runs out of diesel.

Next time fill your filters as much as you can with fuel, and never take fuel from the water separator while your changing the other filter cause it will cause a air pocket in the fuel system. When changing your primary fuel filter before you tighten it down use pump to prime the filter until you see fuel coming out, then tighten it, do the same with the water separator filter.

Next time fill it with diesel and easy filter in and that’s dirty diesel and water u took out the water separator

I’ve got the same truck and engine. Does your fuel water separator filter also turn black at some point? Mine does and I’m not sure if that’s normal

Bia tarde que ferramentas e essa VC usa pra ver código falhas posta ai pra gente valeu

Hey can I ask you what do you think about the driver that got 110 yrs of jail do you think it was race motivated I don't believe so iv driven 10 yrs and I think he should be responsible

For some reason pacar engine remains me of a M11/M14

Earthstrong blessings bro.....Whats the name of your scan tool?

Use six points socket

What is the scan tool name brother you never named it

Can you please tell us more about the scan tool device that you are using to reset the fault codes? Whats the name of it? Thank you so much, and happy belated birthday!

Hello brother what’s the name of diagnostic part you connected to the truck on phone please and god bless you

Where did you get the scan tool?

If this makes younger reverse the numbers 43 to 34 yrs old.😆

Paccar sucks. Before the engines leave the factories they’re already blown up

Sorry but You did it the wrong way

No sir no sirrrrr. Secondary filter goes in the cap before the bowl. Probably why the seal ripped on your last one. Second, do not use wattery dirty fuel from your primary bowl to put into the secondary. Stop the tutorials

Happy birthday

Happy birthday