I didn't believe it myself! Brilliant idea in 5 minutes! 

Pay attention to the movies. They never start with the ending!

@@masterofcrafts a movie made for entertainment is a completely different genre'. It really would be much more useful with a preview of its use at the opening. It is however ingenious and would have saved me a lot of time over the years I was contracting. And a lot of vacuuming! Lol

I think I will ignore clips that don't reveal what they are about in future. This is a disingenuous clickbait trick. If you start at the end to see what its about they still get the view!

@@masterofcrafts This is YT bro ..... not a movie ......instruction video would be the correct term. I agree with the previous poster .....lets see the final product at the beginning.

Gary Barchas How to shoot a video is the right of the video creator.

А что он делает ???

You don't think it would be even safer to use the saw as it was intended, thereby eliminating the cuts with the boards not up against the fence? Those are not safe cuts. If for any reason the blade failed to cut the wood, those clamps would fail. They can't match the power of the motor. the wood would move, possibly being thrown across the shop, and/or the cutting head would surge in the direction of the operator. Safely cutting angles is the whole purpose of the turning cutter head and table.

И нам терпение не помешает в долгом просмртре. Никак не пять минут.

америку открыл. это колёвки.есть фигурнне есть просто поз брать ещё деды и прадеды ими пользовались и нам завещали

Когда постоянно и долго работаешь с чем-то, идеи приходят сами собой.

If tool noise bothers you....then carpentry is not for you....maybe your more of an office kinda guy.

@@danielreyes1084 no, I'm autistic and have auditory hypersensitivity.

I agree about the sound. I like woodworking - the noise adds nothing for recreational viewing. First time I've seen this type of video. Like button gently pressed.

Repent to Jesus Christ! “he refreshes my soul. He guides me along the right paths for his name’s sake.” ‭‭Psalms‬ ‭23:3‬ NIV

Un

а ОНИ тебя ? )))

гениально. что за 5 минут, а видео длится 8, ещё и с ускорением.....

Dmit rii -----. НАВЕРНЯКА ПРОЕБАЛСЯ ЦЕЛЫЙ ДЕНЬ А ТО И БОЛЬШЕ !!!!! МЕНЯ ЗЛИТ ЭТА ХУЙНЯ ---. НЕСООТВЕТСТВИЕ. НАЗВАНИЯ РОЛИКА - СОДЕРЖИМОМУ !!!!,,,,, 👺👺👺

Вы каждый день режете пенопласт ?😉 Какая польза ?

Для мужчин с руками польза большая, можно утеплить дом, дачу, скотный двор,а вам, наверно, просто не нужно

Во всем ищете способ мазнуть черной краской-это зависть. А мастеру браво.

How about learning from someone who actually knows how to use one! Not this guy. The saw is designed to rotate for accurate angle (miter) cuts, but instead of using it that way, he wastes all kinds of time measuring to cut simple, 45° angles! Wtf. On top of that, I found myself cringing at the untidy worksite, not because it looks horrible (even tho it does), but because it’s the kind of work site someone eventually gets hurt on. Loose boards lying around to trip over, never mind the potential that some of those have embedded nails sticking out that someone is gonna step on and end up with a nasty hole in his/ her foot. I know, I’ve been in the construction business for 40 years and recognize this half- arsed behavior for what it is- either complete ignorance, or willful stupidity that results in injury or even worse, depending on how badly it gets out of control. Do yourself a favor and find a different channel to “learn” from, if that’s your goal.

@@Tuncle54 I've always looked at the quality of worksite to judge quality of work.

why did he not just set the angle on the saw , a lot saver than that dodgy clamping not the thing to be showing on youtub

If you want to learn how to use a miter saw this guy is the WORST person you can learn from !!

Repent to Jesus Christ ! “he refreshes my soul. He guides me along the right paths for his name’s sake.” ‭‭Psalms‬ ‭23:3‬ ‭NIV‬‬ J

эх

٣ثثثث٣٣ث

Qqqqq

Ok

Buang

Obrigado!

Merci!

Спасибо! Но чтобы сделать эту самоделку не обязательно иметь такие станки, можно и всё сделать простым ручным инструментом.

@Мастер. Вы заметили,что отзывов ,написанных по-русски ,намного меньше,чем ин.яз?Что бы это значило?

Skip to the end first. Just a swipe of the thumb away from finding out what they made

@@dalestewart264 My thought exactly. It took so much time and effort out of my day. Probably less than typing this sarcastic reply.

Если вы про его пилу, то можно и без нее обойтись, просто уйдет чуть больше времени

SACO...

Repent to Jesus Christ! “he refreshes my soul. He guides me along the right paths for his name’s sake.” ‭‭Psalms‬ ‭23:3‬ ‭NIV‬‬ H

@@jesusislord6545 no such thing, god was invented my man

I was wondering the exact same

yep

I have the same saw and never used that jig lol

@@DeanUrevig oh Dean lol

My thought would be bc of the size of the cuts/wood, and possibility of it kicking out?!? It's safer to clamp down and avoid skipping. (honestly no clue, I just know it happened to me before with my saw). I also think precision is probably more exact by hand than using the bevel... and he was precise!

👏👏👏👏

@@youtukang r

Thanks!

No, no it's not.

You can say that again. Most of them are garbage.

that's a really good tip!

And, did you watch the mystery build? Just wondering

@@RikHendriksDutchCo Nope. I can buy a matte cutter for less than what an hour of my time costs, so this build is never going to be worth doing.

Самое основное в конце.

Still a poor video format.

I don't see any damn little icon.

Полностью не раскрыта тема покупки торцевой пилы AEG, клея, шуруповерта и т.д. Уж раз 100 говорилось, КРАТКОСТЬ - СЕСТРА ТАЛАНТА. Из 8 минут можно сделать 2... Хорошо хоть идиотской музыки типа бумцаца нет... ДА САМОЕ ГЛАВНОЕ ЗАБЫЛ.... В ЛЮБОМ СТРОЙ МАГАЗЕ, ПРОДАЕТСЯ ТАКАЯ ШТУКА - КРОМКОРЕЗ НАЗЫВАЕТСЯ. Что то, качество контента на ТвояТруба, становиться на уровне детского сада.