Тёмный

I finished the Hydrofoil. It Only took 5 years! (Hydrofoil Project) 

Max Maker
Подписаться 111 тыс.
Просмотров 79 тыс.
50% 1

www.felixremot...
__________________________
My Favourite Tools (Through Amazon Influencer Shop):
www.amazon.com...
__________________________
Podcast:
itunes.apple.c...
__________________________
Social Media:
/ maxmaker
/ max_maker_youtube
/ max_maker_yt
www.instructab...
__________________________

Опубликовано:

 

15 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 98   
@fluiditynz
@fluiditynz 2 года назад
I was crying inside when I saw you cut that huge hole in the load bearing side of the mast for the cable entries. Please, swap out the mast with another and drill 2 holes only big enough for one cable instead, vertically and cut vertically between them with a dremel to expand the size for 3 cables. I am impressed with your efforts on all the rest. Interesting to see 3rd party controllers and that the felix remote is using ESP32 wireless. For those who also do software and hardware, the ESP32 series is very powerful and can also be controlled through Arduino IDE.
@fero7786
@fero7786 2 года назад
Yes it's true that rhe ESP32 is very powerful, that's why we used it👐
@ptj6412
@ptj6412 5 месяцев назад
Well?? When are we going to see it in action in the water?
@ChrisBourkeHello
@ChrisBourkeHello 2 года назад
Hilarious, I was thinking about this project earlier in the week, wondering what happened to it. Well done completing this, looking forward to the test ride!
@jonabub
@jonabub 2 года назад
I love your projects and videos and mostly the fact that you share everything! Please keep going on and don't worry, we don't mind waiting, we all have jobs and thing's going on. :) But we will also enjoy to see this project further developing :)
@GolfFoxtrot22
@GolfFoxtrot22 2 года назад
Good to see this project move forward. Looking forward to seeing it on/in the water.
@Jynxx_13
@Jynxx_13 2 года назад
Use Trim-Lok for cut edge protection. Its a U shaped rubber with metal grippers and just hammers on with rubber mallet.
@mankindw1
@mankindw1 2 года назад
So krass was du da alles machst! Ich ziehe meinen Hut! Tolle Sache, würde mich freuen das gute Stück einmal zu testen und zu fahren!
@renaud72
@renaud72 2 года назад
Thank you for sharing , hope to see it on water soon !
@williamschultz298
@williamschultz298 2 года назад
lets go!!! good to finally see you get going again
@BenjaminB0907
@BenjaminB0907 2 года назад
Die Idee das selber zu bauen find ich super geil. Mein grösten Respekt das du das auf englisch machst das gibt einen Daumen hoch und eine Aktivierung der Glocke !
@MaxMakerChannel
@MaxMakerChannel 2 года назад
Vielen Dank! Damals gab es auch noch keine zu kaufen. Das hat sich mitlerweile geändert.
@0xhexdec
@0xhexdec 2 года назад
Nice to see the project coming to an end. Seeing your design now, with some foiling experience, where do you plan to stand on? As a rule of thumb, the center of mass (mainly you) and center of lift (roughly the center of the front wing) should line up. Factoring in your stance, the rear foot is roughly over the mast (there seems to be no pad) , the front foot in front of the wing (round about the position of your VESC Box, a little in front of that, maybe the Cable channel) that looks like a "not so comfy position". for your first tests, maybe take some double sided tape and a small plywood piece with you. If the stance is in a bad spot, just tape the plywood on the board to get a flat surface for your front foot. Have fun with your E-Foil, cheers
@lawnmowerdude
@lawnmowerdude 2 года назад
The tire valves to check for leaks is really smart.
@VitaliiThe
@VitaliiThe 2 года назад
Same story bro, but I even not started :)
@jayfeaver8243
@jayfeaver8243 2 года назад
Wonderful. Great work. I am super impressed. As someone who has a half finished paddle board I last worked on just before my 8 yr old son was born hanging in his basement I can relate to the other obligations part. Look forward to the testing when you have time. J
@MaxMakerChannel
@MaxMakerChannel 2 года назад
Hey that is nice to hear that I am not the only one with delayed projects.
@redshepard5306
@redshepard5306 2 года назад
I make things every day, usually just messes and mistakes, but on occasion huge life altering problems as well. Thanks for a good break from all that. Cool project and i cant wait to see more.
@MaxMakerChannel
@MaxMakerChannel 2 года назад
Making stuff is a lot of fun. I could do those jobs were you only answer emails all day.
@bobjohnson2570
@bobjohnson2570 9 месяцев назад
I want to see the test !!! Nice work :-)
@ireallyreallyhategoogle
@ireallyreallyhategoogle Год назад
A bit disappointed the end was not the Hydrofoil travelling in water.
@tobiwan001
@tobiwan001 Год назад
12:08 Well, who wouldn't focus on the bikini business?
@Das_Carstel
@Das_Carstel 7 месяцев назад
That switch was quite random, to be honest.
@AhrnNilsson
@AhrnNilsson 8 месяцев назад
I never surfed on a hyrdofoil I hear its very hard to learn even for surfers, snowboarders. So for you to learn on this will probably be really difficult. Since you wont know if it's to little lift for you. Also I feel like you would want your foot right where small metal box is, I think you need a cover on that because you cant stand on the side without losing balance. Cool buil I wish I had one :D
@MaxMakerChannel
@MaxMakerChannel 8 месяцев назад
We tried it this summer. You can start by sitting on it and lifting your legs out of the water. Then you apply throttle and see if you get lift. It didn’t produce enough throttle, so for this year I have a new prop.
@bit1564
@bit1564 Год назад
Cant wait to see you fly it!
@bobjoatmon1993
@bobjoatmon1993 2 года назад
I think you need to secure the motor bracket to the vertical column so it can't move up or down and pinch / cut the power cables
@pacificmeister
@pacificmeister 2 года назад
Congratulations! Very nice. So cool that you finished it after all this time. Good luck with the testing!
@MaxMakerChannel
@MaxMakerChannel 2 года назад
Thanks for starting this whole subculture!
@iamkian
@iamkian 2 года назад
I would love to try your remote! Need any "young" testers? Now I'm "stuck" with the Maytech.
@MaxMakerChannel
@MaxMakerChannel 2 года назад
@@iamkian Have you got a Hydrofoil to test it with? It is not my remote. It is form Felix Remote.
@jimday6244
@jimday6244 11 месяцев назад
Really interesting project. Good job.
@impuls60
@impuls60 2 года назад
Ceramic grease is a safer bet on screws in saltwater.
@kanenscott8883
@kanenscott8883 2 года назад
No way! I think about this project almost daily cause I have my own similar project which I am still trying to build my first prototype
@pusnirizda5481
@pusnirizda5481 Год назад
Thats a nice hydrofoil, keep doin'!
@crazydrifter13
@crazydrifter13 Год назад
I can see how this can evolve into a hydrofoil boat. I would like to invest my 4 dollars (100% net worth) in your future business 😂
@patrickmckowen2999
@patrickmckowen2999 3 месяца назад
I don't see a finished vid?
@renaud72
@renaud72 2 года назад
How do you cool the ESC : do you have a pump to get fresh water for the cooling ?
@MaxMakerChannel
@MaxMakerChannel 2 года назад
Hey, its planned to purely sit in a bath of water. The big electronics box in the front has large drainage holes, but the ESC has none. I guess after a few minutes it could overheat the water. Then I would need to change it.
@iamkian
@iamkian 2 года назад
@@MaxMakerChannel It will (should) start throttling at 80c
@charlesmendola
@charlesmendola 3 месяца назад
Hi, I wanted to know which engine you used for your foildrive ? Sinon super vidéo bravo à toi 👌🏼
@lukedoesstuff74
@lukedoesstuff74 2 года назад
Omg yes!!!!!
@shokx
@shokx Год назад
Kupferpaste ist doch eigentlich für Verbindungen von Stahl und Stahl die auch noch thermisch belastet werden. Alu und Kupfer vertragen sich nicht. Siehe Alufelgen die fangen dann an der Nabe an zu gammeln
@fujifilm3141
@fujifilm3141 Год назад
hi, can you share the drawing of the motor mount?
@MaxMakerChannel
@MaxMakerChannel Год назад
Yes, but I am on holiday. Can you remind me on tuesday?
@fujifilm3141
@fujifilm3141 Год назад
hi, how is your holiday? can you send the diagram?
@NicolaGrossenb876
@NicolaGrossenb876 Год назад
Hallo! Bin gerade daran meinen Esc neu zu definieren. Wäre es möglich, zwei 22ah lipos parallel zu schalten, und dennoch meinen 150a esc nicht zu verschmelzen? Ich benutze keine gearbox. Könntest du mit meinem Vorhaben die Betriebszeit schätzen? Vielen Dank!
@kylebaxter3456
@kylebaxter3456 Год назад
ah man gotta see if it works in the water!
@waggerdagger2831
@waggerdagger2831 Год назад
Impressive builds!
@henrikrasmussen7340
@henrikrasmussen7340 Год назад
Im not the first to write this here, i presume. But Zink; Unfortunate choice. But your worksmanship is good :)
@MaxMakerChannel
@MaxMakerChannel Год назад
What zink?
@333cgs333
@333cgs333 Год назад
Good job. There are 3 cables from the motor. So need 3 waterproof connectors. Why not just put them together? And use just 1 connector? Thx
@MaxMakerChannel
@MaxMakerChannel Год назад
I think you can do that if you have one of thise rubber cylinders that has 3 holes inside for each of the three wires.
@robindeakin5468
@robindeakin5468 Год назад
What the hell! I very got projects unfinished 20 years
@abelmurua6980
@abelmurua6980 Год назад
where can I get all the electronics? motor and motor controllers?
@steejans
@steejans 6 месяцев назад
Hi Max, any update on this? I really want to see it flying!
@MaxMakerChannel
@MaxMakerChannel 6 месяцев назад
We tried it last summer. The thrust wasn´t enough, so I bought a new aluminium prop exactly for this application. Will try it out next summer!
@Barzar100
@Barzar100 Год назад
Awesome Wann gibt's das Versuchsvideo
@irkedoff
@irkedoff 10 месяцев назад
Nice❣️
@JamiePineappleWyatt
@JamiePineappleWyatt 2 года назад
This made me really, really miss my multistar packs
@ikbendusan
@ikbendusan Год назад
hey dude i came across one of your autodesk forum posts asking about what license you need for fusion 360 for youtube work; have you ever gotten a conclusive answer?
@JeremyCook
@JeremyCook 2 года назад
Soapy water is a neat trick. Also like the ride logging. Waiting to see you test this out. Are you going to wear one of those bikinis while doing so? Saw someone riding a hydrofoil the other day at the beach, thought of you of course 😃
@MaxMakerChannel
@MaxMakerChannel 2 года назад
Will try it out soon I hope. Just need to find a good spot. After that maybe I can build a boat : )
@Theboredkatze
@Theboredkatze Год назад
German Engineering😃
@ArbitraryOnslaught
@ArbitraryOnslaught 2 года назад
hope your on that thing zippin around
@5L4P5T1CK
@5L4P5T1CK 11 месяцев назад
PLA strong enough - in water environment .. damn mate, use PETG. I mean... really.
@sambryant2150
@sambryant2150 Год назад
'Thankfully I have a forklift' - Max
@Zutun-4K
@Zutun-4K 2 года назад
Max Macher !
@tijssens
@tijssens 2 года назад
The wing seems really small?
@franzupet4406
@franzupet4406 Год назад
finaly
@SharkWhite333
@SharkWhite333 2 года назад
Omg cool cant wait to see it fly i watched all the vods so far and building also one because of you🤘😂 I have one question regarding the weight. Ive seen your board is about 18kg (foilzone) i weighted all my stuff today and im getting 29kg in total. Do you think it os too heavy? The only thing i can reduce some weight will be the battery (14s10p) as i havent build it yet. Ive looked at the weight of the foils you can buy and theyre about 30kg so i think it should be fine but im little nervous on tht. Kr and thex for the info
@MaxMakerChannel
@MaxMakerChannel Год назад
I cannot say for sure, but I think the weight is okay. Ultimately I think my wing is far too small. A bigger wing means more drag but also more lift. At the end of the day we just have to try it out.
@fujifilm3141
@fujifilm3141 Год назад
Сколько миллиметров ширина мачты ?
@hawkins2211
@hawkins2211 2 года назад
How much did this al cost?
@iamkian
@iamkian 2 года назад
Funny. My dad and I are now building our 2nd one. ..... In 3 months :-)
@iamkian
@iamkian 2 года назад
One more. You should have used the 1st motormount, and make a little cut in the front and back of the mast. This will stop the mount moving up and down! With the 2nd motormount the clamp/motor can slide up/down, cut the wires, and cause a lot of problems 😱😱
@MaxMakerChannel
@MaxMakerChannel 2 года назад
@@iamkian That is a very good idea!
@SeanTaffert
@SeanTaffert 2 года назад
Now I want to build one....
@AndrewHelgeCox
@AndrewHelgeCox 2 года назад
🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳
@mymoommm1393
@mymoommm1393 6 месяцев назад
อยากได้แบบนี้
@louietramposch4559
@louietramposch4559 2 года назад
Sick ☝️🤟👽🏄‍♂️
@attisattis3057
@attisattis3057 Год назад
So, did it fly or not ??
@MaxMakerChannel
@MaxMakerChannel Год назад
Got to still test it in the water. Maybe this year. I am a bit down with Long Covid.
@gnydick
@gnydick 2 года назад
where are you supposed to stand? You've got grip tape in the back and in the front, but electronics boxes in the center.
@KevwePatani
@KevwePatani 10 месяцев назад
RU-vid just recommended this video to me again Wondering if you're still interested in thid project
@MaxMakerChannel
@MaxMakerChannel 10 месяцев назад
I am. Just got a new prop for testing.
@KevwePatani
@KevwePatani 10 месяцев назад
@@MaxMakerChannel Awesome! Take your time then
@pushthebutton4602
@pushthebutton4602 2 года назад
5 years later he is testing it in the water? :)
@MachRC9
@MachRC9 Год назад
Have you tried it on the water????
@MaxMakerChannel
@MaxMakerChannel Год назад
My health is a bit shitty at the moment. Hopefully next year.
@iforce2d
@iforce2d 2 года назад
That's an awful lot of motor for a 3d printed mount...
@MaxMakerChannel
@MaxMakerChannel 2 года назад
I think it will be alright. The mount is solid printed and they are stronger than one thinks. Also I use a 0.6mm nozzle which gives better layer adhesion. I do it because 0.6mm just prints much faster than the standard 0.4mm nozzle and there are no more clogs.
@paulbugge7051
@paulbugge7051 2 года назад
bist du deutscher?
@MaxMakerChannel
@MaxMakerChannel 2 года назад
Jo
@christocan4710
@christocan4710 Год назад
“Inclusive”? What is inclusive? Why is this mentioned?
@CREPOZOIDLEMORBIDES
@CREPOZOIDLEMORBIDES Год назад
👍👍👍👍👍👍👍👍👍👋👋👋👋👋👋👋
Далее
SHAPING A FOILBOARD | FULL CARBON FIBER
14:01
Просмотров 38 тыс.
EFOIL vs FOILDRIVE | Side By Side Comparison
16:56
Просмотров 37 тыс.
3D Printed Hydrofoil with Sonar
24:20
Просмотров 481 тыс.
I Built an Atmosphere Powered Battery..
13:00
Просмотров 718 тыс.
Easy Hydrofoil (DIY)
13:52
Просмотров 559 тыс.
Testing the Best Flying Surf Board on the Internet!
9:57
3D Printed Hydrofoil Surfboard - Will it Work?
14:14
Просмотров 489 тыс.
We built a JET powered surf board
16:14
Просмотров 926 тыс.
I Bought the Cheapest Flying Surf Board on the Internet
11:08