No video :(

I Fixed My Bump Steer - The Right Way!

Подписаться 21 тыс.

Просмотров 7 тыс.

50% 1

Bump steer is a very dangerous suspension alignment issue that occurs in vehicles that have had changes made to there over all ride height when the tie rod end and lower control arm are no longer parallel. To correct this, it is recommended to instal a "Bump Steer Kit" which helps bring the tie rod end more in alignment with the lower control arm. In this case I will be installing the bump steer kit on a 1992 Ford Fox Body Mustang 5.0 however the instal instructions will be relevant to all vehicle makes and models.
💥If you like this video, you might also enjoy some of my other Foxbody Mustang related Content:
📽 Why I bought the Comp Cam XE266HR: • Why I bought the Comp ...
📽 FOXBODY Mustang 5.0 IDLE ISSUES: • FOXBODY Mustang 5.0 ID...
📽 Foxbody Burnouts & LOUD Exhaust: • Fox Body 5.0 Mustang E...
📽 TOP 5 First Foxbody Mods: • TOP 5 MUST HAVE First ...
📽 Top 10 Reasons to buy a Foxbody NOW!: • Top 10 Reasons to Buy ...
📺 If you like my content and you haven't already, please consider subscribing to stay up to date with my latest videos ⤵️ www.youtube.co...
🔥 KASL Customs Shirts & Hats: kaslcustoms.my...
💥 3D Printed Antenna Delete Plates: etsy.me/3sxfuPM
💥 3D Printed License Plate Bracket: www.etsy.com/c...
✅ Website: www.kaslcustoms.com
✅ Follow me on Facebook: / kaslcustoms
✅ Follow me on Instagram:
/ 92lx5.0
/ kaslcustoms
@92LX5.0
@KASL Customs
🎧 I also co-host a Foxbody/automotive related podcast called: “Rollin in my 5.0” We upload a new Podcast episode every Monday morning. Our Podcast can be found on both Spotify and Apple Podcasts at the links below:
Apple Podcast:
podcasts.apple...
Spotify Podcast:
open.spotify.c...
I upload new videos every Tuesday @ 12:00PM PST (3:00PM EST); and periodically I upload short clips throughout the week.
Thanks for Watching!
*Please Note: This video is for informational purposes only.
#foxbody #foxbodymustang #mustang #kaslcustoms #airride #suspension #lowered #loweredlifestyle #slammed

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@jamesa6272 2 месяца назад

I watched lmr videos and they never even say to make sure it’s Parrellel to the control are at ride height. They do it with the tires off. Glad I saw this video.

@nunya2814 11 месяцев назад

Your video production has come a long way the past few yrs bud, excellent job, i also never realized how good those headers look on your car. If long tubes weren't such a pain to deal with id put a set like those on mine. Hell moght even still be worth the hassle with how good they look and sound lol.

@KASLCustoms 11 месяцев назад

Thanks so much pal - it has been a long road LOL

@ogsuperflygarage 11 месяцев назад

Great job on the install Gary! Your coupe is looking great Brother! Can't wait to see how the Kenne Bell Supercharger install turns out! 👊🏾👊🏾

@KASLCustoms 10 месяцев назад

Thanks so much my friend!

@motor_citymuscle288 11 месяцев назад

Great in-depth vid. Thanks!

@KASLCustoms 11 месяцев назад

Thx bud

@VansenJenessa 11 месяцев назад

My car is all over the road with these horrible Canadian roads! You know how I feel! Great vid. CANADIAN SUPERMAN APPROVES

@KASLCustoms 11 месяцев назад

Yessir I do!

@paulhudgins5120 11 месяцев назад

Great video Gary, the SVE bump steer worked great on my 04 GT, i had bought it with already had lowering springs on the front, man did it made a difference on how the car reacts to bumps, potholes, even big water puddles. It sure is a must for anyone that lowers their car. Thanks for the shot out, hope the trunk liner works and looks good for you. Thanks buddy!

@KASLCustoms 11 месяцев назад

Thanks buddy! You're a great dude!!!

@frosty_silver_fox4292 11 месяцев назад

Pro tip here: Take a piece of masking tape and put it on the center of the fender for a consistent reference point of measurement each and every time. While the car is on the ground, take a measurement from the bottom of your masked point on your fenderwell down to the centreline of your front wheel bearing on the hub. Now you can put the car on jackstands & remove the front wheels or both front wheels & with a block under the ball joint, Jack up on the lower control arm until you get your measurement backfrom the hub bearing to fenderwell to simulate ride height with the suspension compressed. Now measuring bumpsteer is super easy as the front end is essentially at "ride height" but the wheels are off.

@KASLCustoms 10 месяцев назад

There you go!!!

@frosty_silver_fox4292 10 месяцев назад

@@KASLCustoms you got to give the boys the pro tips! They need them!

@NewEdgeDesigns 11 месяцев назад

You need some shorter sway bar links for lowered cars.. It helps handling tremendously..

@KASLCustoms 11 месяцев назад

They’re on order. Thx bud 👍

@2727579 Месяц назад

Very informative my friend

@KASLCustoms Месяц назад

Thank you!

@dannysublett1014 11 месяцев назад

Nice buddy!

@KASLCustoms 11 месяцев назад

Thx dude!

@Hotrodgeorge855 11 месяцев назад

Nice job 👊🏻👍🏻

@KASLCustoms 11 месяцев назад

Thanks sir!

@crabbypapa3862 11 месяцев назад

Measure from the inner tie rod Boot to the outer tie rod jam Nut, before you loosen it. Assuming you are re-using that nut.

@patg9283 11 месяцев назад

Great video. Just a comment on the bumpsteer kits. I’ve used a couple on fox mustangs with good success. My pace car has a set from maximum Motorsports. I have had issue with passing a safety from some local inspectors. If you can, get a safety inspection done before installation.

@NewEdgeDesigns 11 месяцев назад

It shouldn’t effect your safety inspection, I pass every year with these on..

@KASLCustoms 11 месяцев назад

Interesting...

@patg9283 11 месяцев назад

I had issues with it on an out of province inspection. Totally new rebuild so it stuck out. They passed it but were asking for DOT approval.

@KASLCustoms 11 месяцев назад

Wow! I honestly don’t know the “rules” surrounding it but would sure like to. That said, you’d think they would applaud the fact that it’s now safe. However, the whole lowered thing can be frowned upon as well tho… us car guys just can’t win 😂

@think1stproductions 11 месяцев назад

I really need to do this to my 93

@KASLCustoms 11 месяцев назад

Yes - its a game changer

@think1stproductions 11 месяцев назад

@@KASLCustomsHELL YEAH. IT LOOKS BAD AZZ

@1991pony 11 месяцев назад

Hi Gary. Great video! My only question is, how do you determine when the tie rod is parallel to the control arm? Is there a measurement to be taken? Anyway, really looking forward to all the future content, especially the truck lid sans wing and the Average Fox build. As always, Thanks! Bill. 🦊🙂

@KASLCustoms 11 месяцев назад

Hey Bill! Well buddy, i wish i had a more sophisticated answer for you but… i just eyeball it 😂. The wife says I’m pretty good at hanging pictures so therefore i feel I’m a certified parallel engineer 😉🍻.

@frosty_silver_fox4292 10 месяцев назад

Hey Bill, there is most definitely a sophisticated way of going about this if you want to really get into this and dive deep down the old rabbit hole. Just a RU-vid maximum motorsports bump steer measuring tool and Peruse a few of jacks videos. You can get extremely involved in the process if you want and spend a full 10 hour day taking measurements and cycling the suspension to achieve absolutely zero bump steer. As Gary mentioned for 98% of us it's easiest to just eyeball things as close to parallel as possible while suspension is at ride height, and your chances are about 95% that your car is going to handle perfectly fine with nothing to complain about. If your car is as low as Gary's or mine is, eyeballing the tire rod and the control arm at ride height is going to be pretty tricky. I have another comment here also on how to achieve that with you if need be🤘🏼

@juanmolina19 11 месяцев назад

Great channel brother love your content I watch it like a tv series lol..but btw where can I get one of those under trunk lid covers

@KASLCustoms 11 месяцев назад

Thanks buddy! Much appreciated. I had it sent to me by someone that had one it at a car meet however I believe the outfit that makes them is called: foxbodytrunk.com

@user-pm9dy4zv7w 5 месяцев назад

I saw you were using 96-04 spindles and curious why your didn’t use 94-95 with stock kmember and an arms? I have team z 12” arms and k member with 96-04 spindles and strange coilovers… I’m not sure if I can be doing something better especially because I keep ripping sway bar tabs off the arms?

@KASLCustoms 5 месяцев назад

Hey bud, the spindles you saw in this video are just stock spindles

@elbassaraghii5744 3 месяца назад

Actually that is dangerous 🤸

@dvinpeace 10 месяцев назад

Should this always be done with a load on it? Cause LMR shows tires hanging on regular lift while installing bump steer... Also what would make my Stabilizer links on a angle facing the back of the car??? I got the lowering links. Its lowered on SVE lowering spring & strut kit? Any help greatly appreciated

@KASLCustoms 10 месяцев назад

Yes I would recommend having weight on the suspension. It’s the only way to truly get the angle correct. As for your sway bar links, has some one changed where the sway bar mounts to the frame?

@dvinpeace 10 месяцев назад

No, but they put on tubular lower control arms

@crabbypapa3862 11 месяцев назад

Are your headers chrome, or, ceramic coated? I couldn't see them clearly enough to tell. I ordered ceramic coated on mine and the manufacturer replaced them twice before I bit the bullet and had them Jet Hot Coated to stop the rust. Thank you.

@KASLCustoms 11 месяцев назад

No i sure wish they were ceramic. These are the BBK “chrome” ones that only look decent for the first 20 miles…

@crabbypapa3862 11 месяцев назад

That is the company I used, 6 months and started rusting. White feature car, silver Jet Hot Coated the rest of the exhaust system, and you can see the collectors from the side. It's been 3 years, and , silver in this process not being available, the white coating is still not rusting. Lifetime warranty on it. I like to see which ceramic coating doesn't rust. So far all but the earliest, driven, ones seem to.@@KASLCustoms