I put 11 Speed Deore on a Retro Mountain Bike.

Подписаться 56 тыс.

Просмотров 66 тыс.

50% 1

Swap your free hub body and thats pretty much all it takes.
Check out Just Us! Coffee Roasters here:
justuscoffee.com
Merchandise Site (STICKERS, HATS, SHIRTS):
spindatt.com
Click on this Jenson USA and I get 5 cents:
www.jensonusa....
Patreon (Behind the Scenes Access to all the happenings):
/ spindatt
Amazon Shop:
USA: www.amazon.com...
Canada: www.amazon.ca/...
*
Music By: Brock Berrigan
www.brockberrigan.com
bit.ly/BrockSpotify
Curious About My Gear?
=======Rock Hopper Build======
amzn.to/2OiKG4P
======Rawstercross Build=======
amzn.to/3qr6Tul
========Panaracer Tires=======
bit.ly/3fyuOX8
=========Jenson USA=========
www.jensonusa....
==========Tools=============
Allen Keys: bit.ly/3sOCw3L
Pro Allen Keys: bit.ly/3zhzJT7
Screwdrivers: bit.ly/3knrmPJ
Metric Wrenches: amzn.to/2HG9jiS
Tire Levers: amzn.to/2DyUc8g
Cable Cutters: amzn.to/2pfDAhS
Chain Breaker: amzn.to/2FZZa3d
Chain Whip: amzn.to/2tUdXI3
Cassette Tool: bit.ly/3BeDb1M
Spoke Wrench: amzn.to/2FPCorz
Crank Puller: bit.ly/3BdqPa4
Square Taper Socket: amzn.to/2plgK8g
Bottom Bracket Tool: bit.ly/3DkAxcn
Cheeeeap Tool Kit: amzn.to/2FG9MRs

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 159

@kossmanneault683 3 года назад

that ratio on a 26" wheel will climb a tree. Derailleur is hanging mighty low for trails, but definitely enticing for 26mtb bike packing

@thebr0wnhornet 3 года назад

Going through that now trying to do 1x on a 26” mtb. After adding a wolf tooth type derailleur extension the bottom pulley is an inch from the rim. Might go back to the 32t cassette and run 2x

@nikolaibohachevsky2301 3 года назад

Yeah that seems overkill with the lower ratio you get from a smaller 26 wheel; could easily get away with a 34 tooth chain ring up front. But I dont like the long derailleur cage either. What’s wrong with a 9spd wide range cassette and shorter derailleur cage. Like the MicroShift Advent setup…love that drive train.

@thebr0wnhornet 3 года назад

@RollinRat I mean my setup works just might rip the derailleur on a rock someday. 36t up front 12-46 micro shift acolyte 8 spd, using the Deore derailleur and shifter that were on the bike. $30 cassette, $6 for the wolf tooth, $20 for a cheap narrow wide

@jonathancairns9944 3 года назад

Eric, much love, but, please don't disrespect Shimano... They DEFINITELY stand for reasonably priced bikes and their mid grade stuff is bullet proof for a lot less than SRAM. NOW, don't get me wrong, SRAM makes fabulous stuff, but I've never been willing to throw the extra money at it, when Shimano does it SO WELL for the price.

@pratikpramanik7782 3 года назад

Id argue that mid grade is not reasonable priced these days

@jonathancairns9944 3 года назад

@@pratikpramanik7782 SARS-CoV-2 has definitely changed the game, but I think SRAM has faced the same challenges that Shimano has... But, touche. I was totally thinking pre-pandemic, because I've been riding bikes since 1985.

@maddoxmcpherson3731 3 года назад

I agree shimano makes some really good stuff however they also make some pretty sub par components as well. The new 12 speed road groupo’s are so finicky. If your hanger is not dead straight it won’t shift for shit. Also any of there cable actuated road shifter chew thru the cables way to fast. This is just from my experienced being a full time mechanic at a bike show though. And I have not seen this personally but there cranks delaminating seems far to common and they haven’t done shit about any of those problems for many years.

@jonathancairns9944 3 года назад

@@maddoxmcpherson3731 I totally agree with you about Shimano's top tier, the cranks are shoddy, unreliable, epoxy nonsense, but Tiagra cannot be disrespected, nor Deore. Fucking workhorses. Only weight weenies, with big budgets, suffer the consequence and they can have them.

@jonathancairns9944 3 года назад

Old Deore and 9 peed road Shimano are SIS, and that makes for simple, cheap, big range 2x setups, because you can mix older Deore with more modern Sora road levers. If you're riding more then 9 speed out back and you have more gear range than my 2003 XTR 3x9, than I ask you... Are you really riding a reasonably priced bike?

@martinmalloy5997 3 года назад

Speaking as a bike mechanic from the 90's, I didn't expect the freehub to fit, well done 😁

@-RM- Месяц назад

Same here. Thought he'd need to re-dish.

@jazzper_nl 21 день назад

I'm still in shock!

@morlamweb 13 дней назад

@@-RM- I had to, when I upgraded the freehub on my old GT Timberline to 9-speed gearing.

@mattcardarelli 3 года назад

“I hope this isn’t coming off as one of those dream builds. “ You’re pure gold brother

@josuezuniga6776 Год назад

Looks cool,but why doing it is a good idea?, you'll have less gears,more stressed and thin chain that breaks easily,the derailleur is more exposed so way easier to destroy,more expensive cause parts aren't free 🤷‍♂️🤔

@aliastagami2346 3 года назад

90s MTB love is overdue. These bikes are so much fun when retrofitted with modern components!

@zacharyord8618 3 года назад

Dude I never even though about swapping free hub bodies. Omgggggg I have to go to the shop soon lol.

@tsalesto 3 года назад

Methinks a larger chainring will be needed. Gotta love the shiny parts, looking cool.

@jamespaxon1888 3 года назад

I need to go this route on my diamond back, if I ever commit to replacing the trusty 3x7

@stevesnailfish 3 года назад

I converted my old 2007 GT Chucker from Acera 3x9 to SRAM NX 1x11 with a 11-42 cassette.....1x systems always look better in my view and less hassle.....I even converted my 2x CX and gravel bikes to 1x systems..... Your channel has been a tad influential these past few years.....I'm still watching it so keep up the good work. A set of decent forks on that old bike after the 1x conversion should look the mutt's nuts !!!

@garyonnen7634 3 года назад

The music sort of push you that way. Great video but I do love a 3 by 7.

@tar170 Год назад

Yeah. These 1 by whatevers are solutions in search of a problem. I'll never give up my 3x7 and 3x8.

@reklawrs 3 года назад

I wonder if I can go from 8 to 11spd with an old late '90s XTR hub. I probably have switch out my derailleur (reverse shifting XTR and shifter)? I can always dream....

@kultaotsa 3 года назад

Nice! I can recommend the Shimano XT M8000 series as well, you can find them used for a reasonable price and the rd can be serviced in like 30min. I've swapped multiple bikes with it, the latest being a 26" with a 42 single front (fsa vero) and a 11-46 m8000 in the rear (the cassette can be a cheaper one, you don't need the expensive xt cassette).

@roydrink 3 года назад

5:33 “And I thought you were ready to give up “ A common theme of Spindatt videos…

@MeNtAlmil 3 года назад

Deore looks awesome! Thinking about doing this to my 1980s Schwinn but need to find a newer freehub to replace my rear freewheel first.

@alleborgo5481 Год назад

51 biggest cog on 26" wheels MTB.... 11 speed rear derailleur reaaaaaally long. On the first obstacle jumping, you'll leave the derailleur's cage on the ground. It's so close on 51....

@613.Rooster 3 года назад

Super Cool stuff. Love to see Spindatt keeping the 26 inch revolution alive!

@emilylor5328 Год назад

Love the bike design ru-vid.comUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L and functionality. It is hard to align the front tired to center the disk brakes. The brake wheel touches the stationery side of the brake caliper and pad. I aired the tire up to 40 psi as the markings say 40-60psi. Left the house for a few hours and came back to an exploded innertube.All in all it seems to be a good bike. Have not ridden it yet though so that's the max of my knowledge. Update, put a new innertube made sure the tire was set properly and it did the same thing in under 20 minutes as second pic shows.

@bennettturk3206 7 месяцев назад

I went to the local dump to get rid of some scrap metal and there were PILES old mountain bikes in a twisted up heap that were destroyed by a bull dozer. 😒

@armyfreak1367 2 месяца назад

This was some lame plug and play you didn't need to do anything to the frame lucky you

@spongeimperium126 8 месяцев назад

I got one of those forks. It's a Marzochi XC600 Titanium air fork.

@Jonathan-sz9ue 2 года назад

I have a 1997 GT palomar. Does anyone know if I can convert it to 1 x 10 or 1x11 (what I really want)?

@Napaperi 2 года назад

What bottom bracket and size was used? I have trek 7000, just trying to make sure I order the right size

@CarlosRodriguez-yd5fv Год назад

I have a 90's trek and I want to do this to it. Looking forward to watch your other videos on this bike

@sandy_knight Год назад

30x51 on a 26" wheel is very low gearing! I'd have gone 36 teeth on the front to start with.

@ToeKneeBee725 Год назад

Thank you for the #subscriptionthreats, we've been missing them. 🙂👍

@benturner190 3 года назад

Yo Eric use the white ‘dummy freehub’ to line up your new cassette with the splines on the freehub of the bike an then you can just drop it on in one go

@TheBRad704 3 года назад

I was about to post the same thing. I feel like only 0.01% of people know that the white cassette holder is designed to fit into the free hub body for easy installation.

@qin02 2 года назад

I got a 12sp on a 1994 trek 830shx had to play with the chainline

@jonl8816 Год назад

I wish there were some smaller 11 speed cassettes. I don't need a 50 tooth. Even 40 tooth

@cfloren 3 года назад

Radness - thank you for posting this! Was just contemplating what it would take to get a modern 1x drivetrain on a mid-'90s Trek I have sitting around here.

@GeekonaBike 3 года назад

A 27.5 front wheel would be interesting.

@mitchcoulter9681 3 года назад

Huge shoutout to Just Us Coffee for getting Eric away from Sram for a moment!

@Spindatt 3 года назад

Gettoutaherewiththat!

@Zeben84 3 года назад

Now i understand why the industry was pushing toward 29" wheels, this derailleur is going to it alot of stuff on the ground :')

@spade6240 3 года назад

I run xt 12 speed on a 26 and clearance is fine, I only ever use the 52t on fire road climbs anyway the wrap is really good on the 10t

@IsmaelChamu 3 года назад

@@spade6240 what's your front Chainring size? How many teeth do you got on there?

@paulkruglov7280 3 года назад

Wicked cool how you marry vintage and modern to keep this bike rolling again. What was once old is new again! Spinny, keep up the awesome diversified video content rolling.

@noburt9 3 года назад

I'd love to see you throw sensah on a bike of yours. I want to see you test it and abuse it

@artvandalay2736 2 года назад

whats wrong with dream build videos?

@Wannaridebikes 3 года назад

I found out I had them two holes on a bike but not tool so I took my grind wrench that had prongs. It worked.

@glennpettersson9002 3 года назад

That's a great hack👍

@samjohns6114 3 года назад

what store did you end up ordering the groupset from?

@abatecruento667 3 года назад

I did something similar just yesterday with an old 7sp wheel, on which I transplanted an 8sp free hub, but then the wheel didn't sit in the center and v brakes no likey when that happens. I messed up with the spoke tension and moved the whole wheel sideways. I hope it won't kill me lmao

@IsmaelChamu 3 года назад

If you have a steel frame you should cold press the rear to allow more space 135mm +. You wouldn't have to mess with the spoke tension and whatnot lol but Hey! If you alive next week then it all worked fine! Lol

@ronnisullivan9794 3 месяца назад

What about the axle length?????

@naikiew 3 года назад

Thank you sir...your video literally saved my bike build in hopes of a transfer from 9 speed to 11 speed. Now i'm hoping the freehub body I ordered does work on my deore xt wheels

@wafflemeow126 7 месяцев назад

Which freehub body did you order and did it work??

@adammoonface 2 года назад

So is this 130mm axle spacing?

@albertoalvarez8366 3 года назад

An scandinavian fork maybe?

@Casual_BackPacking 2 года назад

Holy shit please ride up steep shit !

@andi4281 3 года назад

The derailleur will hit the ground 🥶

@snakeshiet Год назад

so you didn't have to re-dish the wheel ?

@ridinglikearussian5945 3 года назад

Now put a sram xx1 wireless axs on it

@fastbicyclerider7300 Год назад

Now hs33 magura brakes

@zdravo4 Год назад

Hello, interesting to see this. I have the same setup on my bike which is much modern than yours. What chainline you have there? On my bike I put 4mm spacers on crank to make CL perfect.

@theejoeylee 3 года назад

I have an old purple/blue fade 830 MountainTrack frame I got for $20 & this IS my dream build !

@maxlabarbera5797 3 года назад

I love it when a plan comes together

@miniac60 2 года назад

Please, help me understand the gearing on this bike! I started riding with a low gear of 42/28 and my 17 year old legs took me up anything paved (even if I did have to zig zag). Now my 39/32 is tough lol. My GT Mountain bike is geared so low (22/36) granny gear I can barely keep the bike upright unless I'm over 100 cadence. Just plain silly IMHO

@thesausage351 Год назад

I’m in a similar situation, I have a Cannondale lefty I’m rebuilding as my pimp hardtail bike, but then I have 2 super nice, super clean mid-late 90’s mountain bikes, and I’m going to start building a replica of my first mountain bike, so I’m going to end up with 3 rigid, 10-12 speed mountain bikes, plus I have a GT Avalanche I plan to make into a 26” BMX like yours, but my biggest and most exciting build will be a Klunker I’m planning. Disc brake conversion, maybe sprung front, maybe solid, not sure, some nice steel wheels with a 1 x 12 most likely, balloon tyres, I’m really keen for that!

@prettynitty0131 Год назад

The bike is solid and my Ebike conversion went great. ru-vid.comUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Very smooth ride at 30mph with no problems (135 miles ridden so far). The picture is a bit deceiving - there is WAY less space in the center of the frame than it shows. The suspension connection takes up the entire thing. So I needed to attach my battery on the bottom of the frame and my controller on the top. Instructions for assembly were lacking but honestly it wasn't too hard to figure out even though I have very little bike knowledge. Watched some youtube videos on adjusting the disk brakes but that was it. Still, I am loving it and very happy with the purchase.

@shaun89759 3 года назад

My recent find; 4130 diamondback 26” came with a Mach 5 fork! But the stiffener thing is broke. Jb weld??!! And “cork” it for rigid street use ?? Not sure how, show me?

@rolfaalto 3 года назад

I'm a fan of component upgrades, but you went too far. Shimano 9-speed was the best they ever produced, and super convenient because all components are swappable (7-9 and 10-speed road). The top spec XTR dual-control levers gave a level of thumb-free functionality that has been discontinued.

@ritchakaritch 3 года назад

save the rat bike

@Glassrunchannel 2 года назад

That Deore FC-M5100-1 crankset is supposed to have a 52 mm chainline. That will be about 2mm more than a 3x crankset I believe. Did you experience any issues with the shifting or when backpedalling? Thinking of doing the same (if I can get parts one of these days!) but I am not sure about shifthing, backpedalling issues? Cheers!

@MB-jz3uu 2 года назад

Did this with an old 2004 mongoose full suspension bike and pretty much put the parts bin special on it. My fiance isn't super big into mountain so I don't want to waste the money to buy her a modern geometry frame. So its pretty much a mullet 69er with a modern rockshox front and rear shock with hydraulic brakes and modern hubs. Thing rides great but I wouldnt want to race on it.

@glennpettersson9002 3 года назад

No no no it's not working! There is so much tool porn in this episode I don't know what just happened. It's high school math all over again, Ms Benson was so hot my math is crap!😍😍😬😫

@joshuawest5967 Год назад

Awesome

@DoctorSalazar84 3 года назад

Just so you know! Technically my 1991, 92 or 93 TRek single track 930 with 11 speed XT way cooler📈📊🧾yup!

@spacerconrad 3 года назад

I just swapped a 51t Deore to my #Y2Kona Fire Mountain. I just singled out an XT crank with a Raceface 38t NW ring and it's geared low enough to effectively 'walk' up some pretty steep stuff. While I've gotten comments on the long cage, I've been through some brush and it seems to be tucked in well enough to avoid snagging anything, though I plan more bikepacking than trail riding on this bike anyway.

@Legitch 3 года назад

Very jealous. I tried swapping the freehub body on my 7-speed hub but I wasn't so lucky. Mine has some weird interface that's apparently rare so I couldn't find a single one that matches. And I tried at least half a dozen. So I cobbled together a Frankenstein monster of a freehub body from the original and one other, using the bigger 8/9/10-speed shell and I just BARELY managed to screw it together. Still haven't summed up the courage to actually mount it back on the wheel and try it out though.

@skinheads 3 года назад

As a Eastern European I find it kinda funny how you say word "OUT" noticed that watching Trailer Park Boys as well. All the best man

@timfreeman2603 3 года назад

I bought 2 Treks today (Getting in early for Xmas) and the dealer said there are only 22 of that model coming to Australia this year. Tonnes of frames but no Shimano ‘noisy’ bits thanks to COVID.

@matthewguenther6925 3 года назад

Love this. :) Recently swapped a Uni-Hyper (threaded for Uniglide AND Hyperglide) 7 spd freehub body for a 10 spd one (and discovered there were 2 different Shimano freehub styles, regular and "heavy duty" :S, fortunately was able to scrounge the right one). I did have to re-dish the wheel a little so the brakes didn't rub after I adjusted the cones for freehub clearance. Had the same issue you had with bottom bracket too, I'd forgotten that you needed 3 different tools to remove those old school BB's and my 2 pin spanner is lost somewhere in the sands of time. 2 finish nails in a chunk of scrap 1x2 did the trick for me (after I failed with vice grips and needle nose pliers) Modern BB's sure spoil you for ease of install/uninstall.

@MikeyTiger37 3 года назад

I still really want to convert my Rockhopper to a 1x setup but I'm just not sure what parts I need and if my freehub can take a larger cassette. Would I be better off getting a LBS to do this for me? And this is after watching your Rockhopper videos 😂

@benhensby8528 3 года назад

I wasn't a fan of shimano, and then I decided to put that exact drive on a 1996 santa cruz heckler and it's the bomb!!!

@Gabesafish 3 года назад

Can you fit a 32 or 34 tooth chainring on that frame? 30T x12 on a 26” wheel is going to be very limited on top speed.

@WalkerBikes 3 года назад

Ha!! The needle nose trick, I love it lol I think I'm gonna snap the pliers everytime, but it's never done me wrong....recent got the park tool pin spanner though hahaha

@Mennokn1ght 3 года назад

There's something really satisfying about a well built BB. Took apart a campy BB on a 1970 Raleigh that had been used as a commuter in Oregon. The outside was super grimy but inside was squeaky clean, the grease hadn't even discolored at all. The cups had a threading pattern where the spindle goes through that keeps dirt out.

@davejack3054 11 месяцев назад

That corkscrew pattern pumped out all the water and not a seal in sight. Plus the quality of the steel and lapped bearing races was amazing. I wonder what a mechanic would think today if they saw a BB with no seals on it?

@bikesandbeyond618 3 года назад

Wanna come down to Illinois and make this swap out on my 2003 Trek 800?

@jackwilson8651 3 года назад

Dear god. The more videos I watch on this channel the more ideas I have and that means the more dollars I convince myself I need to spend. Shocking.

@michaelmann6482 3 года назад

The Trek is NOT cooler, because it’s made out of aluminum. Sorry but no aluminum bike will ever be cooler. If it was a lugged Trek 950 of the same vintage it would be cooler.

@michaelmann6482 3 года назад

With the exception of a Klein mtb , of course. Or a Cannondale Red Shred - that’s cool too.

@jackwilson8651 3 года назад

I disagree. If it looks the business, does it matter what material it’s made of?

@jackwilson8651 3 года назад

Is it worth going to 11 speed (on a 1 x) on a 26 inch wheel? Isn’t 10 speed enough in a 1 x scenario?

@leafbranch6 Год назад

Great video currently building up a trek 850 antelope so this helps a lot 👍

@colingrover2039 3 года назад

Keep. The. Marzocchi. It has a removable steerer so "just" pop in a threadless one.

@oheso 3 года назад

All options? So pink handlebar tassels and Player cards in the spokes. Got it.

@fr0xk 2 года назад

Well, you can install anything as long as the frame supports components

@monicalopez8634 2 года назад

I love your channel!. What you do with your bikes is the same thing i do.

@klaasbaud7185 3 года назад

Why dont you put this deore 11s on your full suspension bike? I think it is better than whats on there now.

@luisereno5472 3 года назад

Watching and subscribing from philippines

@kimkrimson 3 года назад

From 7 to 11 Best title ever You should be sponsored by 7/11 for this :)

@bosanderspublictheology 2 года назад

I love upgrading old 26 bikes, so even though I am only 1:34 into it I am loving this video (at least the idea)

@felixbouchard2354 3 года назад

I'll take this fork on my trail bike! This will be an upgrade!!

@jamesschwinghamer3163 2 года назад

Do you need new cranks for this set up or are they just extra touch up???

@spiffyspokes9758 3 года назад

I only subscribed because I care about the well being of my trail bike, great content as usual 👌

@kevinford2223 3 года назад

Music is finally getting a little hipper at least the beginnings now 😂 👍🏻

@Wannaridebikes 3 года назад

With the big cassette when in bigger gear will the derailed hang lower and hit. Something.

@feedbackzaloop 3 года назад

is this a Led Zeppelin reference in the thumbnail???

@certifiedlawnpros 3 года назад

dude i subscribed from the intro alone! sweet bikes!

@osmarq3435 3 года назад

i thought that you had to redish the wheel. So its really that easy on a 90s MTB?

@psclassy1123 2 года назад

Nice to see this if you look it up online you can’t find any info ever

@jeremyabbott2829 3 года назад

This is the type of video I’ve been waiting for!

@mikekilburn3552 2 года назад

Another coffee shop keeping us bikers going. Got to love it

@danashmore4765 3 года назад

That looks well nice now with that mahoosive cassette, can't wait to see it with a better fork 👍

@travischapman6763 3 года назад

I've always been a shimano fan boy compared to Sram. A little fiddling seems to pay off in dividends with longevity and reliability. BUT, that freaking pinchbolt design, I could do without.

@travischapman6763 3 года назад

Anybody have resources to research that freehub body swapping? Seems valuable, but I am completely unfamiliar.

@YunqueParaforjar Год назад

With quadruple and quintuple custom cranksets, it would be possible to get rid of huge frying pans on the rear hub, especially on the tiny 26" wheel of a retro mtb, because, as Jan Heine wrote, «Now the time has finally come to go beyond three chainrings». A really modern bike with a really modern solution is not a 1x12 drivetrain, but was already presented in 1973 at the Salon de Cycle in Paris by Alex Singer.