I Saved This Cheap F30 BMW! N20 Turbo DIY

Подписаться 114 тыс.

Просмотров 150 тыс.

50% 1

In this video I show you how to replace the turbo on your N20 or N26 powered BMW. I do this on a 2012 328i with the N20 engine.
This video covers removing and installing a replacement turbo. I also convert the replacement turbo from electronic to pneumatic.
This car would blow smoke on start up and had a wastegate rattle sound.
If you're following this guide you would need a turbo install kit, that can be found here (affiliate):
bit.ly/3goUrII
The updated turbo feed line with the check valve can be found here (affiliate):
bit.ly/3izao1H
Special thanks to Keegan Currie for donating the turbocharger. His Instagram handle is "keegancurrie" if you would like to give a follow for some car content.
keegancurrie?ut...
Thanks for watching :)
When you see the word "affiliate" listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it's a win all around :) Thank you!

Авто/Мото

Опубликовано:

12 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 238

@MrKcatx 3 года назад

Glad that turbo got put to some good use!

@markburkey6371 3 года назад

@@machtschnell7452 I think you meant to reply to the next comment...lol

@VehicularDIY 3 года назад

Thanks again man 😀

@coreytaylor8552 Год назад

@kevincalhoun7796 2 года назад

So I just finished my turbo install and boy let me tell you!!! This kicked my ass but if it wasn’t for this video, I would’ve set this car on fire and watched it burn to the ground! Huge shoutout to you man! Big time! If you ever end up in South Florida, the first round is on me homie! 🤙🏽

@Streamlined955 3 года назад

You sir, are a treasure to the BMW community. Nice job and great video.

@MarioDallaRiva 3 года назад

Nice! You make it look simple 👍🏻 Kudos to the turbo donor.

@austinsalt7705 11 месяцев назад

This is the best camera work I have seen on ANY repair video! Well done.

@jayjwin1178 3 года назад

You made this all look so easy. you are at master level!

@paradeinberlin 3 года назад

Seriously informative N20 content, keep it up !

@Mike-og1qk 3 года назад

Great content. I was just talking about maintenance with my brother between my E92/N54 and his F87. You have been my favorite BMW content provider for a while. Although we do not have this model, it is always enjoyable to watch you work and see what can be done at home.

@VehicularDIY 3 года назад

Thanks!

@IDontHaveAVideo 3 года назад

Your videos are awesome. Keep up the good work. You’re inspiring me to get back into BMW ownership.

@DarthVaderOG 3 года назад

Watching this gives me hope for whenever my turbo goes bad. It’s not bad of a job just need to have some patience and remember how everything goes.

@davidfrank2824 Год назад

First off I did hit the like and describe a button. I started laughing when you were talking about the smoke coming up from the engine. I still remember the first time that happened to me. I turned my car off immediately and my father asked me what was wrong? I told him the engine was smoking after doing a complete tune-up and oil change. He told me to turn it back on and within a couple minutes it started again. I was getting ready to turn it off again and he was over there laughing and told me to leave it alone. You went through all the things that would cause it and it would stop after running for a little bit. So we jumped into the car and drove to go pick up dinner. And by the time we arrived there it was done smoking. Money came out with dinner he was laughing he told me he was watching me from the window. Looking forward to watching more of your videos.

@BmwAlex0621 3 года назад

I dont even have an f30 and these videos are just so informative

@Jack-sd5te 3 года назад

post notifications, have been waiting for another f30 vid 🔥🔥

@jonjimenez5139 Год назад

Amazing diy as always man 2nd video of yours that helps me on fixing the car. Great work

@Bimmer624 3 года назад

Your content is always on fire bro 🔥it's like a trophy I always save till I get off work

@VehicularDIY 3 года назад

Thanks!

@CastroJordan 3 года назад

I daily drive 100 miles in one of these and it’s perfect for that. I just have a sprinter booster set on max and an afe intake and it makes the car feel very peppy. Fwiw my engine is very quiet also and no ticking, everyone says it’s loud due to the gdi but I suspect they need shorter oci’s because I change my oil frequently and no ticking. Glad you are making content on one of these.

@IKhanNot 3 года назад

Yeah people are following the 10k or 15k mile oil changes then taking the car to a quick lube place thinking that the crap they use is going to last that long. In their mind oil is oil. I change my oil every 5k-6k despite the 10k oil change interval and the motor is happy.

@firasalwakeel5365 3 года назад

Waaaw. Removing a turbo without the subframe, what a huge difference between this and the e90. Great video as always. Maybe the next one, would be how to replace a cracked windshield 😄

@covertorange9120 3 года назад

While I don’t own any of the cars that you have on your channel (e90 m3) I always love the style of your videos and the work you do. Very satisfying!

@VehicularDIY 3 года назад

Thanks!

@aruekca18det 3 года назад

As always... Simply amazing content. Thank you!

@igotaction 3 года назад

What an amazing daily driver!!! Glad you saved it! Great video and great lighting!!!

@VehicularDIY 3 года назад

For perspective its has more torque down low then the G80. It's decent to drive. Thanks!

@tumbox9204 2 дня назад

Bro, thanks for this. Your videos are very well explained.

@alexhier5051 3 года назад

Thanks bro. Need to change my coolant line orings to the turbo and install the new oil line with the check valve and this is just the video I need.

@lifeofluke8620 2 года назад

Do you have to remove the entire manifold?

@Nico_335i_DCT 3 года назад

Wow, great job! It's really a good channel car! Thanks for sharing. Dutch regards, Nico.

@splits_the_wtr622 3 года назад

You did great on this video editing a1 continue on great content I don’t have this car but it’s interesting to learn something new

@kc2213 3 года назад

If only it was this easy to replace the turbos on an N54….

@Sporgan 3 года назад

you say that like you dont love removing your subframe

@VehicularDIY 3 года назад

It's about 1/2 as easy on this car. Not any less complicated just less work needed to get to it and one less turbo.

@lyfzgoodgarage826 3 года назад

Really not that bad tbh I’ve done it on 2 n54 and 1 n55

@karolismondeika6145 3 года назад

Sux on N54

@Nathan-gj8ch 2 года назад

@@lyfzgoodgarage826 but I have xdrive...

@abimmernut 3 года назад

Thanks for the post. Another good DIY!

@omazdetailing4979 6 месяцев назад

Thanks so much for the info and the video. I just got an F30 328i X Drive and I am going to do the same project as you did and with your video man I know I will be able to get it done ✅ Thanks

@ufohunters4612 3 года назад

Another great video !! Thanks for educating me once again!!

@osagyefoghanaba 3 года назад

Another intuitive video👌…thanks man👍

@joelmerimaa9169 2 года назад

So I've finally gotten around to changing the turbo on my 320i. The reassembly is still in progress because the car is fighting me so much on every step! Probably doesn't help to have everything rusted because of the harsh winters, and the combination of xDrive & auto trans, working on the floor etc... You make it look so easy, magic of editing? 😂

@georgeiulian92 3 года назад

Amazing, best diy content from ytb! Respect from România, East Europe 💪

@VehicularDIY 3 года назад

Thank you!

@aggieE46 3 года назад

Great work. I absolutely expected a Pure Turbo and catless downpipe. Great content as always.

@VehicularDIY 3 года назад

From what I've read these engines don't like too much power.

@michaelv.1107 3 года назад

@@VehicularDIY You're right. Most modern engines are already on the edge to increase efficiency and reduce emmisions. Many people use their cars just to go to the shops down the road. No warming up at all, no high output to clean carbon built up and boil away water and fuel from the oil. Therefore manufacturers try to heat up the engine afap but that thermal management is very specific adjusted on the nominal power. When you increase boost they may get hot spots and simply burn holes in the pistons or get bend cyl. heads. It's not like the "good ole" N54 where you easily add 50% power with minor changes and the only thing what blows is your mind... Sorry for the long post, no potato at hand.

@dfqnexxus3710 3 года назад

As always your content it's absolutely amazing 👏

@VehicularDIY 3 года назад

Thanks!

@miodragmaravic3324 6 месяцев назад

My wife is not happy I found this video😂😅 . Great video. Thank you very much

@wndaa Год назад

this video is exactly what i needed, thanks!

@kop5847 Год назад

thank you so much for this content, you made it look so easy!!!

@josephlucero8420 11 месяцев назад

Nice steal of a deal

@rriis 2 года назад

so, this is the second video i watched on replacing a turbo. i think it shows to me that I would rather pay someone to do the work. i got a quote from a shop that would do the labor for about $500, and the book shows it to be a 6 hour job. of course, the 6 hours is not running into any issues, not to mention they can put the vehicle on a lift and of course not run into any issues with tools, etc.

@NGlitchesFTW 2 года назад

I Have a 2014 n26, thinking about changing my turbo myself, 85k miles on it, just just did a diy valve cover gasket change myself and turned out to be complicated but worked lol, i think im ready to attempt this haha, thank you for this video!

@jimmiedixon5648 2 года назад

Can you please do my valve gasket change for me :)

@raeggienable3064 3 года назад

Wow nice pick up man! 👍🏽

@2FTermination Год назад

Excellent video tutorial! Thank you!

@philiplee7604 3 года назад

Great content as usual!!

@michaelgallo3943 2 года назад

Thanks for the video. Any tips on replacing just the coolant lines to the turbo?

@335d-Lane 3 года назад

Thanks for the video man

@rosodigital 2 года назад

How long was this job? I just ordered a replacement turbo and parts to fix my car... Ill be posting on my channel DIYWITHRP! keep up the good work! one of the best no nonsense DIY channels on youtube!

@rickhoffman7656 2 года назад

I love the F30 platform

@madbikeboysins 3 года назад

The direct injection makes the N20 sound like a diesel a lot of the time. I often have car guys ask if there is something wrong with it - that's just the way it is since new. I have an F20 / N20, the only real modification is an oil catch can for the PCV.

@dh1380 3 года назад

Hah! Not only this but when the clip that moves the exhaust flap gets bent out of shape, the car rattles at both ends 🤣

@mobitechaz 8 месяцев назад

on the electronic waste gate controller (assuming you model has this), you may encounter a DTC for improper waste gate linkage swing. If so, there is a 10mm adjustment on the arm at the attachment to the controller that may need to be fine tuned. You will need a scan tool capable of setting the limits. If you don't have this, you'll need to adjust slowly and carefully in either direction. I was about 8/10th of a mm out of range and arm linkage required adjustment to clear out the DTC.

@puctbridge 2 года назад

turned out really good!

@miroslavblaskov1711 2 месяца назад

How many miles on the car? Great video! I did the wastegate rattle repair and it helped me a lot! Thanks!

@eddy5933 Год назад

Can you drop a list of the tools needed to replace the turbo ? Thank you

@bence.gabor.slezak 3 года назад

I haven't slept in weeks I was so excited to see the engine. In the US it might not be quick but in Europe, a car with sub 6 seconds 0-60 is fast, and eu spec is 100kg lighter.

@bence.gabor.slezak 3 года назад

I wonder what that exhaust manifold looks like on the inside. Seems pretty simple on the outside and it makes good power.

@VehicularDIY 3 года назад

Yeah its no slouch, feels faster than my old 330i e46 6 speed was with full bolt on. The manifold looks the same inside as a N54.

@bence.gabor.slezak 3 года назад

@@VehicularDIY the zf 8 speed and peak torque from 1250 rpm makes it very good for street driving and it still makes around 170 ft-lb at redline, which would be a pretty good as peak torque for a naturally aspirated 2L engine.

@adonismorales9363 Год назад

Awecome video! Absolutly a money saver. Quick question. I saw how you converted the electronic waste gate actuator to a pneumatic waste gate actuator. Would you be able to do the opposite? For example my 2013 f30 328i xdrive needs a new turbo. My f30 cmes with an electronic wastegate actuator. The turbo kit that I'm planning to get is setup for a f30 with pneumatic waste gate actuator. Would I be able to just take off the pneumatic actuator, and put in my stock electronic actuator? Or would I be better off just getting a tubro that comes with an electronic waste gate actuator? Thank you for reading this!

@colbymcintosh5989 2 года назад

Hello, can you help me with a quick question? Is it possible to change out the oil fill line without removing the turbo entirely?

@CruddyPeak 3 года назад

Now you just gotta load up E-Sys and code in the sport automatic trans!

@pasttraveller5767 2 года назад

Hello, Love your contents, I recently bought 2017 BMW 330xi B48 and looking to replace valve cover gasket but wanted to buy Tools set to do this and other maintenance jobs without putting it on lift, would you be able to recommend tools I need for the maintenance jobs. Thanks

@ImranKhan-ej3fy Год назад

Do you need to drain the coolant? Or can you top up after disconnecting the coolant feed line on the turbo? Also would I need to bleed the system after doing so?

@travisdoyle7997 2 года назад

I appreciate this video! Just changed the turbo in mine following how you did it and definitely couldn’t have done it without you!

@davejohnson6144 3 года назад

Damn bro are you a mechanic by trade? You know so much !

@VehicularDIY 3 года назад

I work in IT hardware by trade but one of my first jobs was working as an apprentice at a shop part time.

@DIY.11.11 Год назад

Great video!!

@manuelreyes396 4 месяца назад

Hello, very good video, is it posible for you to get an ECU for a 2013 320i Sport with the manual waste gate actuator?

@calebordogne4611 Месяц назад

Hey man I have a n20 and I wanna make as much power as possible but keeping the engine alive do u have a parts list u could suggest?

@vin605 10 месяцев назад

Great job 👏

@Timeless_Essence 3 года назад

great job

@Andy-ur4vu 2 года назад

Damn this video is just done so properly thank you

@davidbarlow7955 2 года назад

Good show How many hours involved

@sophivideos1 9 месяцев назад

Where/how did you get the vacuum line for pneumatic wastegate actuator? The electronic one doesn't have the input line. How did you solve that?

@pm7805 2 года назад

Nice video. Could you check where was the car made- Munich Germany/South Africa?

@mohammadtaufek5529 Год назад

nice content. I have F30 2013 with N20 engine just change the original plastic Charge & Boost pipe to NFT Aluminium charge & boost pipe…. last friday felt something pop off & suddently lost power & got ‘drive terrain’ problem note on idrive. The charge pipe just pop open the connction to the throttle body. It lasted 10 years. My mechanic recommend me to change to aluminium …. he said the plastic charge & boost pipe doesnt give consistant boost …. & By charging it to aluminium will last a lifetime ….. now the acceleration is smoother…. my first mode since 2013…. In 2013, when I purchase the car I changed the exhaust to Msport … How long do turbo charge last ?? can turbo charge be serviced ??

@geraraider1 2 года назад

Hey there, do I need to drain the oil Before taking off the manifold

@andrewtravers7964 2 года назад

Wow love the car. $$$ I just need to get on ur sales website. Live in California to.

@simplenipple 10 месяцев назад

I got everything off but that 1 of the damn coolant lines to the turbo. Tried my ass off 2 hours before giving up and just reassembling.

@MrWaheedulHaque 2 года назад

my car has a vacuum wastegate can i get a turbo with electric wastegate or will that not work, do i have to just find one with vacuum wastegate

@DIY.11.11 3 месяца назад

Nice thanks

@Xanadu98 Год назад

Where is the best place to get a turbo for my 2013 328i like this one?

@paulyprograms Год назад

What book? You mention "doing it by the book". Haynes manual? or another. Great video

@larrymanaro3972 11 месяцев назад

great video,,, but you could of done a little more time on certain parts, removing them, i broke some of the parts due to you talked about it,, but didnt show how to remove them first,, i did totaly enjoyed your video, and no one has a good video of this N20 engine,,, thanks for your help,,, i enjoyed it truly...Larry

@DupekCSS 2 года назад

There is valve set on aliexpress. I just installed this on my F11 N20B20 13" and it works just fine. The fix cost me less than $20.

@whydotufaqoff 2 года назад

Thanks...A great video. I have got to change my oil feed pipe now and this is just the guide I needed. One thing different on my one I noticed is that I have a big aluminium subframe in the way and it all looks a bit harder to get to. My one is a 2013 . Is it the same process do you know? Many thanks...

@lifeofluke8620 2 года назад

Is yours xdrive? How did it go? I’m about to attempt the same. Oil line replacement.

@YK-lk3po 3 года назад

Should do the timing chain job at that mileage

@shanemiller9191 3 года назад

I love you videos. No fluff. Just straight to the point. I need a better scan tool. What kind do you use. I want to find one that would help me diagnose better. And do things like program new injectors. Etc. Are you patreon?

@VehicularDIY 3 года назад

I use a laptop with ISTA and INPA installed.

@adrianleblanc3389 3 года назад

Great content as usual! Question though, have you ever considered one of those “quick jacks” for garage use? Or do you find jack stands is good enough for major jobs such as engine in turbo replacement where you partially drop subframe? I’m planning on doing my N54 turbos and I’ve seen you do work on them with just jack stands, how awful is it usually?

@VehicularDIY 3 года назад

Thanks! I find the 6 ton Jack's good enough for all jobs. A set of quickjacks would be a nice luxury to have but for anything I've needed to do the heavy Jack stands have been fine.

@adrianleblanc3389 3 года назад

@@VehicularDIY thanks! Can’t wait to see how the F30 turns out !!👍🏽

@Archi72s 3 года назад

Thanks

@CityHunt3R911 2 года назад

I was wondering at how many miles are you guys at when replacing the turbo??? I'm at 122k miles and it seems to have inconstant power.

@user-us5hx6fp2f 2 года назад

Tell me please. I have oil mixed with something in the tube that enters the throttle valve.is the turbine falling apart? f30 N20 328i.

@baims8367 9 месяцев назад

2014 x3 looking at buying right now owners said has p1290 code electronic waste gate stop not learned. But what worries me is they say that it doesn’t run at all ?? Wouldn’t it at least try to start or run with this p1290 waste gate relearn code? It just would t make power (boost)

@ronniet3887 Год назад

This video is an absolute lifesaver. Can you list all the tools you used in this video? I would definitely purchase them through an affiliate link

@nasabu1135 Год назад

what is the rattle sound at start up i have that does that mean my turbo needs replacing?

@dakotamack6918 2 года назад

Your a straight machine no waisting time in detail as fuck good shit brother!

@jwoods6585 6 месяцев назад

omg you sir are a legend

@settounite Месяц назад

Which book explains how to do this?

@romankozlovskiy7899 Год назад

Always hard on bmws

@mrhenry1121 3 года назад

Great video man, I see you live in Houston me too can you check mine it’s also making a rattling noise.

@Kickbasser 3 года назад

Great and clear video DIY! Is it possible to change the updated feed line without removing the turbo? How to know if my car has an updated version? Thanks

@VehicularDIY 3 года назад

Thanks! Yeah it is, you can get to it from what I can see.

@whydotufaqoff 2 года назад

@@VehicularDIY no you definitely can’t change the updated oil pipe without removing the manifold... I have just done it thanks...

@woonahk 3 года назад

If I knew this before, I did not change turbo oil feed line and then replace turbo as well. I had a F25 N20, that had blueish smoke every morning. Then it has gone after serviced turbo oil feed line for free because it was serviced under recall program. Eventually, I had notorious 'drivetrain malfunction' error and that was because of bad turbocharger

@VehicularDIY 3 года назад

Seems like the wastegate lasts around 120K before it wears out.

@hangpilot1200 Год назад

How many miles did the car have? My wife wrecked our 2011 X3 w/ the N52. 190,000 miles and she had another 100,000 miles in her (the car) ;-) Just purchased a 2017 X3 w/ the N20 and 70,000 miles knowing there will be turbo work not too far down the line. I've had the inline 6 for almost a million miles w/ four vehicles. Hope I grow to 'appreciate' this four-popper!

@HowToNation 3 года назад

Looks A lot easier than doing the same thing on an N54 😂🙃

@torygyberg8837 3 года назад

Well that car is worth a lot more now!

@jieddo1 3 года назад

Yeah probably jumped up about $10k

@1Donkeykong 3 года назад

5:16 - me when I wake up at 3am and that water I drank before bed hits

@robhughes8516 3 года назад

May I ask what your background is? You seem to be a real natural at this whole “mechanic” thing and I’m just curious if this is how you earn your living or just something you like to do on your own? I really enjoy the content and wish I was even half as competent as you at this. I have an 09 X5 4.8 and it’s been very reliable so far but I plan on doing any work that needs to be done in the future myself and really liked your previous X5 content.

@VehicularDIY 3 года назад

I work in the IT hardware industry. I started wrenching when I was young but it's been a side gig.