I Sawed-Off a .50 Caliber Sniper Rifle... 

well damn

😂

Your scar was itching wasn't it?

I'm sure this has your neck itching...✌️❤️

😂

Sir this is a .50 pistol

ATF: so if it's a pistol is that a brace or a stock😂

ATF: Got any dogs Matt?

ATF "That's not a sniper, that's a f'ing anti-material rifle! GET DOWN ON THE FLOOR!"

@@wesm6973 If the ATF was really that bloodthirsty against dogs, you'd think there would be reports of new agents leaving after they've been told their dog has to be put down in order to work for them.

Actually, that shield was featured in an old video of his back when he did his standard of pick a target and see when a bullet goes through, I recommend the video as there are two, one with this shield and I believe another maybe weaker shield he did before, I think Irving is also featured in one of or both of the videos

Hey look at us...who would have thought

Yeah i miss it

Or when he shot lil tiny gun replicas😂

@@ctownthrasher not me

I thought that from the thumbnail

FOR THE EMPEROR!!!!

FOR THE EMPEROR!

FOR THE EMPEROR!!!!!!!

Exactly my thought lol

I litterally just said that to myself 😆😆

FOR THE EMPEROR

I thought the same damn thing

i was thinking the same

I thought it was a bolter

Nice catch!

First thing I said when I saw the thumbnail "thats just a bolter straight up"

I legit clicked on this video for the bolter comments...

"heh it's just a fuckin bloter"

​@DontReadMyProfilePicture.283 to late I did

Wish they would combine this with a Gyro rocket

Hey, it's lifetime fluid! Fine print: Lifetime rated for 30k miles

Very true. It often gets so bad that by time you change it out it just dumps the transmission because it was using the coarseness of the metal shavings in the old fluid to help give the transmission friction and now that it's working properly, the transmission starts to slip

Trans missions. Crap there out doin missions now. Good luck on that sprinkle tits

dont need to replace the atf, the fluid's automatic

As long as you don't say "tranny fluid" which apparently is some kind of new gender leakage, we should be ok.

But was it F# or GMajor? XD

Does it count as "short-barrelled" if the barrel is of negative length?

@@LecherousLizard Maybe, maybe not. Depends on what the ATF had for breakfast.

@@paulis7319 What if it has no barrel at all.

@@LecherousLizard does it count as a rifle if all the rifling has been removed

@@krpajda I guess it's a bolter now.

thats what i thought brother. For the Emperor

That’s right Brother!

FOR THE GLORY OF THE IMPERIUM CHARGE

THE EMPEROR PROVIEDS !

the Emperor protects

Haha Bruder

legendary artifact

Yeah but try wearing a llama!😅

@@dannystephenson4855 Is that a challenge?

@@zyriantel9601 lmmfao! Oh man i just seen this today and i needed the laugh! TY for that

It could probably paint half a wall with the unburnt powder....

Nah

Truly a keeper.

Kind of you to look after her boyfriends kid ❤

This comment is hilarious and brilliant all in one thanks for making me laugh my damn ass off ...kudos sir for finding the very one ..she sure is sounding dreamy when she infacts feels the need to vomit at the very word or corrupt word ATF ...TOO TOO FUNNY BRO... SHE WINS THE INTERWEBS TODAY LMAO

@@enderbirds3814 you have extreme issues, holy crap.

Yes and No. Because wood make that kind of sound with hardened steel. But rock or other materials not.

Edit:13:21 That is true bell concept to me.

I have so much time for the video around Christmas where they play the Ukrainian Bell Carol on chopped off gun barrels! Y'all have no idea...

​@@joe125fulthey need more "bells" and need to make music with them

when you hear "barrel harmonics" this is what they are talking about

I was curious as to why that round only read under 2000fps

Ah... nope just science

sawed off.... and an ATF bit hmm

Same

@@DontReadMyProfilePicture.283 just, SUCH a loser.

Don't have kids​@@DontReadMyProfilePicture.283

@@DontReadMyProfilePicture.283 Ok, I won’t then 👍🏻

He needs to saw off the stock too, and get himself a propa shoota'

And paint red good and propa@@coffinhimself

Boltpistol😂

Needs more purity seals and a chainsaw bayonet

that's why I clicked on the video.

What is your duty? TO SERVE THE EMPEROR'S WILL!

Bro... emporer? Like of the Emporium?

@@kattn01 NAH ITZ DAH EMPOROR YOU FILTHY GROCK

What is the Emperors will!!!

@@wyattk1540 THAT WE FIGHT AND DIE

Yes thank you! I havent seen someone comment that yet. If only they looked at the slow-mo before ending the video 😭😭

Gay

@@aidsfaceohhhh yaaaaah. Put your jaggon in my thrusher.

@@aidsfacebased on that one word comment, you seem like someone who’s afraid of catching gay

@@aidsfaceI wish! 🏳️‍🌈

I don’t like that thecameraman is talking a lot, since I enjoyed it more on the old videos whenthey didn’t talk. That’s just me though…

Which one has the most subs? I love them all, but there’s a reason.

It probably won't sound good at all and probably won't sway in the breeze. Bit heavy and thick

and he should also learn about resonance and frequency 🤣🤣🤣🤣👍👍

Obviously will need to cut off a chunk of table to function as the paddle though.

@@electricheartpony drill a few holes only through one side so theres metal backing to catch air and lighten it up and it should. would also get some nice whistling.

​@@electricheartponyit will because the striker will be lighter and sway in the wind while the barrel chunks will stay still and ring. Should sound great

I saw a video of an ancient temple in which the stone columns had their own tones. All different too, like each barrel section. So effing cool.

I came here looking for this comment. Yes. This. This man knows what's up.

@@beol_ same here xD

Needs some purity seals!

As soon as I say the body of the 50 I came looking for this comment

Saw the thumbnail and immediately thought the exact same thing lol

Legend.

GW is calling they want their boltor back

Adeptus Mechanicus approved

He made a literall bolter. Cut the barrel too short though. And bolters dont use a stock. But still awesome

Similar to how the plates are mounted in a glockenspiel or a xylophone

And it highly depend on material too stell is well known for this type of ringing sound.

All I got outta that was gun barrel wind chimes…

They gotta stop everything they're doing.

Preaching to the choir bucko

You mean abolished? It's a bureau...aka an office of bureaucrats...aka people never elected, or even wanted

@@hourglasboohoo

Truth

The whole gun is strapped down tight af

Definitely

Thank we gonna call it a high powered sbr👀

@@ATF_officialnoooo not the atf!!!!

@@ATF_officialrunnn guys run!

What do muricans need a shifter for?

their cars @@arcuz7862

@@arcuz7862 The magic that is a standard transmission.

@@vipe650r Good one.

Gen z anti theft system

Can’t possibly think why it wouldn’t be 😉

I think he said Fluffy! Noooooo!

Probably because a dog squealed and he said “fluffy no”

100th like 😎

It’s a ruby Ridge joke for you people under 30

Good eye! You're totally right!

Fun with harmonic resonance

Tuning tube instead of tuning fork? 😂

Always are lol 😂

12:07

My gut tells me it has something to do with the width/regularity of the gaps he cut into the barrel. Each little stand alone "arch" is like a mini tuning fork. THIS is just one reason why Smarter Everyday NEEDS to be on DemoRanch!

@davetremaine9688 all 3 ring, it should have something to do with the length of them. The wind chime analogy he made was very apt.

@@davetremaine9688 I don‘t think the irregularities play much of a role. On most instruments only the length of the vibrating tube, string or other sound producing medium plays a role. With drums, I think it is called a snare that you attach, you can change how the instrument sounds but the frequency stays the same (Not 100 certain on music stuff). The frequency you get from a vibrating object is dependent on the speed of propagation (material property independent of shape) and the length of the vibration. On the vibrating object you get standing waves which depend on the shape (opening on one or both sides of a tube). If you cut partial slits into the tube it might affect one side a bit but my best guess is, that the entire tube would still have those fixed vibrational modes even if parts were cut out as it is still a solid tube.

@@guntera3845 I feel like if one of us was smart enough and cared enough we could extract the waveform from the file and get a better idea... I can do the first part if you can do the idea part? lmao

That’s a DeWalt, not a Skil

He will be proud though with the chronographs ending 😂

Better not to mention Scott in a video where a .50 BMG explodes

​@@aureliogrollaScott already mentioned himself in the comments 😄

Taylor? 😂

Or Ron Swanson's 'I do whatever I want' permit

@@BassJunkie200 just a fellow RSK member 🫡

@@davetremaine9688 Hell yea! RSK FOR LIFE!

How do you fucking notice that?!

It’s okay, he has an entire cinder block protecting him 😂