@@darianwydra6596 it would feel even better if it happened during a specific event... like playing with your kid. But I have so many scratches on my Alpinist I put it under the category of just living.
Hi Marc, loving the content, greeting form the UK. 👍🇬🇧. A number of people on the Rolex forums prefer using ‘Sunshine’ cloths, instead of Cape Cod. They have noticed that CC is a little too abrasive and leaves a milky finish with microscopic scratches where rubbed. With the Sunshine product there are 3 colours of cloth available… pink, yellow and blue. The pink is only for bushed surfaces and the yellow and blue only for polished surfaces. The blue cloth is the least abrasive and perfect for micro scratches. Sunshine are a Japanese company, but the product is sold globally. I hope this helps. Best Wishes, Steve 👍
I suffer really bad with O.C.D when it comes to most possessions car's, now my watches. I can spend a whole night obsessing over one scratch. My last mistake was knocking out the pins on a Hamilton strap, I didn't protect the flank thus leaving micro scratches. I used car polish, not as abrasive, thus taking longer to remove, but I got there in the end and now my mind is rested again until the nest dumb ass manoeuvre! Great video, subscribed.
I can't handle scratch's on my car's, watch's, phone's, bracelet's. I'm really OCD. Everything must be perfect. Even on my pen's, table's and cutlery's I lose sleep's. I'm OCD's.
Good tip, thanks. Agree that it’s perfectly sensible to want to remove scratches like the ones you had. When using callipers on a watch, just apply some insulating tape to the calliper jaws and re-zero them.
Sorry dude...I gave up after 5 minutes of rambling. You seem like a good guy so I'll remain subscribed. A little tip from a professional film editor: 3 minute videos. 1) Wrist shot. 2) I bought this awesome Explorer 2 3) I scratched it 4) Look at the scratch 5) Here's how I fixed it. 6) the end.
Sure, if you want to be like every other RU-vidr and do exactly what they do then fine but there's plenty of RU-vid channels with the same basic format and if you made videos of the same mould you would only be competing against all of them and really offering nothing more than what they already do. I like the way this is formatted it feels a lot more conversational which for me is very engaging and keeps me watching on, it's unique. It's fine to say that the video could have been a bit snappier in places to keep people interested as I agree it was a bit long winded in parts but maybe others like it that way, just listing guidelines to follow isn't exactly helpful especially when you haven't made a successful RU-vid channel yourself.
I thought it was fine. If you come here with this problem then you'd be more interested. Otherwise it's probably not what you're wanting to see. I found it very useful having scratched my wife's watch (well she said i did!)
I quite like the charming way he explains his self deprecating story. I agree in watch reviews in which it takes you three mins out of a five minute review till we get to see the watch, yes I'm annoyed. If I'm still watching. This I don't mind at all. (I guess because it's relatable.
I’m gonna give this a try ... I have a 216570 black-face Explorer II which is my daily wear. It’s picking up LOTS of scratches and dings. Scotch pads help keep up the brushed sections. This is why I’ll NEVER go for polished centre-links.
Personally, I think an Explorer II with scratches is cooler than one that doesn't have any scratches and stuff. I don't know, it's like a guy who has a perfect 4wd truck prepared. You know he doesn't really use it and is just trying to show off. Anyway, I am a watch guy all the way but a large portion of this Market is based on dudes trying to show off. Not saying you're one of them. Just saying.
Scratched the polished flank of the clasp on my brand new, blue dial Sky Dweller. Bought Cape Cod, needed 30 min of elbow grease and the scratch now can't be found. So good!
Thank you! I’m the same way about my Datejust. I just had it serviced and was helping my dad and scratched the clasp on the polished part. I just ordered the cloth and will follow your instructions
How did it go?? My Datejust clasp is scratched on the polished part as well haha. I’m considering using cape cod. It worked perfectly on my polished seiko bezel a few years ago. But I’m scared to try on the Rolex….
I feel your pain. I'm not quite at the Rolex level but I just put a tiny scratch on my new Hamilton and I can't even tell the time now because I'm too busy staring at the scratch.
Tip: when you are done with the Cape Cod cloth you DON’T run the watch under water etc - you instead use another soft rag such as a terry towel long cloth or similar to buff the surface you used the Cape Cod cloth on.
Omg, I am exactly the same! Made a scratch on my watch when I was changing the strap and couldn’t sleep the whole bloody night! Googled a few things, watched RU-vid tutorials, came across yours, getting Cape Cod Cloth today. Thank you so much!
@@kasharudner4971 great thanks for response - I need to fix some light scratches on the band of my sea master - think it’s suitable for lighter scratches too?
@@JonsVlogz I polished the bezel of my 70 ties Seiko tv watch, it has a very wide bezel ( like 70 ties watches had) and I made a scratch while removing the bracelet and attaching leather strap, it was a big deep gouge and I managed to polish it off by hand. First used 1000 grid, than 1500, finished with 2000 At the end used polishing compound to polish. Did the crystal too, was scratched up now it’s looking much better.
I feel you. I'm an older man and have been a watch nut for years. I always wanted a luxury watch and finally nine months ago I bought a Rolex. At first I thought it would go into the rotation with the other 15 or so that i own but it immediately became a 24/7 watch. I have gotten scratches on the bracelet that drive me nuts. The dealer says to not worry, but since it isn't his watch mine is the only opinion that matters. I have thought about using my dremel and the polishing kit for it, but I just haven't had the guts to do it. I don't want to bother the people at the store and definitely want to keep it pristine. I live in a major city so shouldn't have a problem buying the cloths. Thanks for the video. It will make it easier to live with knowing that the little scratches are removable.
I see this comment and i really feel it, i just bought a new omega and already there tiny hair line scuffs and scratches no one else see but i do and it kills me every time.
Preventative Solution 1: Use Selotape. Preventative Solution 2: I think you _can_ indeed get plastic calipers for measuring delicate things. We all live and learn.
Be very careful with the brushed metal part of the watch, this cloth shines that too! Better tape that first and then polish the shiny bit. I learned the hard way on my 116600LN.
I just got a caliper from walmart online that has fiber parts (plastic) and it works great and won't scratch. Harbor freight sells a plastic one for a couple bucks that I used to use.
I make knives as a hobby so i work with metals alot on my watches as long as it's not to deep I use a dremel with a small buffing wheel I use a #2 compound that has diamond dust in it the switch to #1 to finish it if its brushed steel I just the #1 compound the finish it with a wire brush stainless steel cleaner then move up 1 more level of rougher wire to match the brush stainless steel to blend it in with the way the watch was made I don't recommend anyone doing this unless they have had years of practice with metals now the 18k gold bands and watch are way easier to work with because the metal is a lot softer
Those are different kinds of stainless steel meant for different purposes. The one used in the caliper is a very hard martensitic SS which prevents deformations to the tool. The 904l used in the Rolex has way better corrosion resistance.
Great vid! Thx! To answer your question, even though a bit late; if I buy a vintage watch I would first clean it with liquid soap, luke warm water and viniger then polish it. With a new watch I would only clean it with a soft cloth even if it gets scratches because I know I can always polish it down the road if I wanted to and I can live with the scratches. I would always avoid polishing new watches because this eats up the steel so why shed its weight especially if I'm bound to have another scratch on it one way or another.
You probably now know that they make calipers out of plastic for exactly such situations and you can also buy, I believe, plastic caliper covers to protect items being measured.
Marc old chap you are like me in that I am now getting too paranoid about the slight marks/scratches on the sides of the clasp on my Explorer 214270. I need to polish them out so while I was watching your video I ordered some on ebay. Good stuff Marc.
Your marks come from using a back and fourth movement. Small circles are better and would remove this. However doing it this way means you should be extra carefull not to round off the clean edges. Using tape on the side your not working on will help.
Hi Marc, thanks for the useful video. I’ve recently noticed a similar scratch on my Breitling Navitimer in exactly the same place. Unlike you, I don’t know how I managed it and can only guess that it may have happened as a result of wearing metal cufflinks, although I did check to make sure they wouldn’t be likely to come into contact with the watch. I wasn’t sure if I’d be brave enough to try using the cape cod cloth on my watch, in case I made things worse, but after watching your video, I’m gonna give it a shot. Many thanks and keep up the good work.
I used a Cape Cod cloth on a 16570 before putting it up for sale. It took all the minute scratches off and made the watch look much better. I really regret selling that Explorer II Polar.
Marc love your positive attitude as well as I could see myself telling the same story after I scratched my Rolex Sub Hulk although it didn’t happen same way you did it, I dropped mine on the concrete floor And I wasn’t the one to get rid of that scratched case I took it to jeweller, anyway just wanted to say you have a amazing channel and I am your new subscriber, Peace out
Same here : I have an explorer 1, and a 2 , black dial . I did scratch them and called Rolex : I was told not to do anything until the next maintenance and they ll polish it . They recommend as few polishing as possible .
I had recently purchased two watches, which I have scratched, is why I selected your video, but the lava light caught my attention, then the Rich made knives, wow, so the first watch was a Swatch sistem 51 automatic, I was working out of doors, cleaning brush and the face received some major mars, and scratches, the retailer, was able to buff out the damage, my citizen watch has been scratched, I'm not so concerned, normal circumastances I would not worry, but your video advertised a simple fix, I am giving a second thought. My watches were purchased for utility purpose, normal wear, A Rolex, is collectable and I appreciate your concern.
@@ghostfave1216 No! I use it daily so there's no need. Matter of fact i have a couple of more now. Nothing polishing won't fix but i rather do it when i'm looking to sell it which i won't atleast not for a year.
@@thegame123ize well I have a few scuffs on my gold invicta, but hey sometimes ya need to wear it with pride. Scuffs are normal for watches. Every human being out there should at least have a scuff or a scratch
I have a few super fine hairline scratches on the side of my SD 43. I’ve owned the watch a little over six months and I wear it everyday. I do not yet own a polishing cloth of any kind. I don’t know if I’ll just deal with things until I send in for service. I also have several small scratches on the bottom of the clasp...but that is just called “welcome to owning a watch.” 👍🇺🇸
Do you have to worry about the sapphire crystal if you were polishing a Rolex Oyster Perpetual 41 with the polished SS bezel? Should I tape it off? Thanks for sharing this is really helpful.
i dont know why all these watch gurus have to measure a watch with calipers when the makers have the measurements freely available. watching the urban gentry measure his mates daytona was a nerve-racking experience!
Hi Marc why would you want to measure your watch every time you use cape cod you take off metal if you keep going you will ruin Watch as so many have and it can become a bit OCD wear and enjoy it’s a tool after all
Now I understand that a couple of deep scratches I did on my favourite 60$ aliexpress watches trying to open a caseback isn't a reason to be nervous. It's weird but sometimes a scratch on a budget watch disappoints more than one on a brand new car or brand new pair of shoes.
No, we don't think you are crazy. We are all here because we are doing the same thing. I am listening to your method while buffing my Hamilton with never dull. The never dull seems to work quite the same way, and it's what I had on hand.
omg, I just did exactly the same, with those exact bargain calipers, to a longines in the first 8 mins of ownership. Those calipers are sharp hardened steel. Thanks for the advice.
Probably already in the comments, but I'm not going to read them all. They do sell calipers in plastic. If using the metal ones, tape up the jaws. The other guys either tape the jaws or use the plastic ones.
I just use a soft cloth and spend hours just rubbing the damaged area I do this whilst watching TV i hate to see marks on my time piece all of my collection is prestine they are omega high grade steel
Scotch tape your calipers. Measuring the lug width or case side is not like measuring the radii on a diamond. Cape Cod cloth is the best, but use really light pressures while using.
Do absolutely nothing to a fine watch such as a Rolex, don't measure and scratch it, don't put an abrasive cloth on it and change the finish, etc. Everything an amateur does is damaging and ruining it.
Scratches on a Rolex are a sign of distinction...showing that the watch has been out there in the world experiencing adventures, like James Bond and Sir Edmund Hillary.
Mark, caliper is not a power tool. I like the Tshirt . The hat couldn't see very well. I bought the Cape cod cloth months ago but I'm afraid to use it. I was hoping your video would help me but you didn't inspire confidence....so still afraid to use it!
Same here i just hate to get a scratch in my watch just as when i get it in my car and my rationale is like ok i have a scratch in my bumper but thw car next to me has a big dent so not bad for me you know what I mean, therefore I am the type that tries to leave all the protective material on the wstch the longest.
It not work on seikos diashield, I skratch my mm300 with many little scratches and that thing cant remove any of them, one big scratch I trade with sand paper 3000 and it didnt hel, instead it added many small scratches visible under magnification, so I was thinking that piece of material will remove those super tine almost not visible ones, but no it didnt! But for watches with normal steal, not hardener ona like seioko diasheld sand paper or this thing helps. Paper 3000 on my other vatches lives mirror surface but in diasheld it lives only scratches.
I don't like battlescars. They're not character, they're damage. Even on vintage watches, when people say don't polish, I polish... as long as the polisher doesn't remove sharp edges.
It runs the value of your watch, plus patina gives new life to your watch. By polishing you are actively ruining your watch in most experts and buyers mind.
does a dremmell polisher work. can you get that pure mirror polish back? or is it better to accept scratches and just get them removed on your next service?
On certain metals you’ll cause pitting which is tiny dots on the surface of your watch (like my Tudor, I need to send it in for servicing to fix it). Do not use, it’s not worth it and you’ll burn yourself. The metal will dull after a few weeks too
Yes I hate war wounds. They are really only scratches on my watch uhhg! What about the satin finish is there anything to help with a mar/scratch on them areas? Of course it’s on the satin rose gold and it drives me ccrraazzyy!
I know how it feels. We spend endless dollars on a watch and it gets a scratch. I purchase a new Tag Heuer in '98 and it's now covered with scratches. That's why I'm afraid to get luxury watches anymore.
