I Used SEAFOAM to Fix My Low Compression BMW M54 |

Подписаться 9 тыс.

Просмотров 36 тыс.

50% 1

With Cylinder 1 and 3 reading 30 and 60 respectively, it wasn't looking too good for my turbo m54b30 e46 drift build, but after some feedback from you guys, and some helpful insight on the forums, I decided to give seafoam a try, and not in the traditional sense with a huge plume of smoke.
Follow me and the team on IG for the latest updates
@Nuisance_Carl
@TeamNuisance
Want to make your own videos? Here's some of my gear
Camera: amzn.to/2Yiyz7s
Microphone: amzn.to/2XbVm8t
Mini Tripod: amzn.to/2YoPBBb
Quick Release: amzn.to/2X8xRxb
Camera Stabilizer: amzn.to/2NiCFvl
Camera Cage: amzn.to/2JfAu6K
Tripod: amzn.to/2Xho34d

Авто/Мото

Опубликовано:

24 окт 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@benshaw576 2 года назад

It actually does the opposite on most occasions because it is the carbon build up in the cylinder that's making the seal compensating the wear on the rings and seals

@WynPowell 3 года назад

Thanks for sharing love! I was told about Seafoam as well because I have carbon in my 2003 BMW 325i engine and I was having a hard time accelerating to 40!!!! I put seafoam in the gas tank and it ran better within MINUTES!! I have to go an oil change now so thanks to you I will see how this goes. I maybe able to record it!

@nuisance_carl 3 года назад

Nice! Glad to hear seafoam helped you out.

@TheCeoShow_ 8 месяцев назад

Did this end up working for you? Going through something similar

@TripperTheDon 3 года назад

Seafoam is good shit man, For years! No matter the car! Whether in the tank, the crank, or intake! Have never seen it applied directly in the cylinder tho! Good shit.

@nuisance_carl 3 года назад

Sea foam is definitely awesome!

@straightsixracing 4 года назад

🤘🏻🤘🏻🤘🏻 I’m catching up on subs bro. Glad you’re sticking with m54 😤

@nuisance_carl 4 года назад

Hell yea man, keep on grinding! I'm pretty happy with the decision myself.

@JMUDoc 2 года назад

There are a lot of solvents I've seen recommended for this - I'm about to do it myself, and I think I will go with acetone/ATF in a 1:1 mix. The problem is one of design - this engine uses only two rings, and they are low tension; I would suggest the O2 Pilot mod for the CCV in addition to this cleaning because the extra vacuum both pulls the oil vapours out of the head and sucks the oil rings against the bores.

@faygoluv6613 3 года назад

Hey do you recommend me to fix the head gasket on my e46 or just put a fresh engine

@nuisance_carl 3 года назад

That depends on a lot of factors.

@edgarq3101 2 года назад

Hell yeah

@miguelvega8241 Месяц назад

I have the same problem its driving me nuts i did the sea foam today i hope i have the same luck as you 😢

@somecoffee341 4 года назад

I'm really looking forward to seeing you get that thing back on the road😁 which turbo are planning to use? I've seen a lot of guys here in Germany run holset turbos(and hitting 500+whp), but I don't know whether they're cheap in the states too🤔

@nuisance_carl 4 года назад

Same! I haven't fully committed to a turbo yet.

@straightsixracing 4 года назад

I’m on a gt3582 and it spools really quick. Like 3800rpm 12psi

@nuisance_carl 4 года назад

@DJ Coin Laundry I'm piecing it together to tailor it to my build. I figured might as well since a lot of the stuff is custom anyways.

@DriftEmigrant 4 года назад

@@straightsixracing what A/R is ypur gt3582?

@acef_performance8416 4 года назад

Also don’t get mixed up, your compression will be higher if you have oil or seafoam in the cylinder

@nuisance_carl 4 года назад

Totally understand that. It was just enough reason for me to give the green light 👍

@TurboArt1 4 года назад

Great results in cleaning my n54 with seafoam or marble mystery oil

@MichaelAMangone 4 года назад

Could it be the connections on your gauge? The o-ring in my adapter was torn, and I couldn't see it until I took it out and twisted it. Then, I could see how poorly it was sealing. Anyway, I don't think there would be any harm in letting it dry out, testing it dry, and checking if your numbers go uneven and lower. Maybe that SeaFoam is softening the carbon on the rings enough to permit a seal, and it'll harden up and cause low compression when it dries out?

@nuisance_carl 4 года назад

Could be. The surface of the spark plug hole was a little gritty as well so that may have caused a poor seal. I'm probably also going to try some Chemtool b12 when I get the chance. It should do a better job than seafoam.

@johanhdez Месяц назад

Did it fix the problem permanently? Thanks

@acef_performance8416 4 года назад

I think the big misconception is that the more smoke the cleaner, but actually seafoam is Petrolium based so as it burns it smokes, equivalent to putting oil in your cylinder and then running it, but dope video I just Performed the same thing but I let it sit in each cylinder over night

@Gigacivic Год назад

So u leave SEAFOAM in the effected cylinder overnight, suck it out, do it again then test compression the next day? Is that right?

@trymhammerstrmgisiger1278 3 месяца назад

yes, did you even see video?

@INFAMOUSL1M1TZ_TL 2 года назад

Any suggestions?? I have a 92’ e34 with low compression in 2 cylinders. I used the brand Restore once and not much happened. I did a complete engine flush and oil change. After that I used the brand Bars. I have another bottle of Bars that I plan on using but is there anything else I can do to solve this issue??

@nuisance_carl 2 года назад

You’ll have to diagnose whether it’s a piston ring issue or valve issue.

@INFAMOUSL1M1TZ_TL 2 года назад

@@nuisance_carl would it be best to rebuild the engine had about 245k miles on it but my dad suggested I just swap it with the same engine

@nuisance_carl 2 года назад

@@INFAMOUSL1M1TZ_TL Either way works. I'm partial to just swapping in another motor. There's definitely risks involved with either option.

@dinisrebola2125 4 года назад

The sea foam broke de carbon and and the rings have open more against the cilinder.

@nuisance_carl 4 года назад

Yup!

@thebossgaming1519 4 года назад

i would recomend m52 over m54 tbh m54 are not as robust blocks go with m52b30 stroker kit, but bettert results in the long run

@nuisance_carl 4 года назад

Considering my low power goals, I don't think it'll make that much of a difference. We'll see.

@Bonkatronicks 4 года назад

3.5 stroker kit would be different

@imestia7911 3 года назад

So that's a diesel? I'm a noob in mechanic but I'm very interested

@nuisance_carl 3 года назад

Gas engine 👍🏽

@kentpayen8848 3 года назад

How did it turn out..

@nuisance_carl 3 года назад

Looking good so far

@Mr.Schitzengigglez 4 года назад

My guess is that the bottom of your valves were carboned up, and not seating properly, causing them to leak compression. The seafoam probably broke up the looser carbon enough to allow them to properly seat, and that's why you saw the dramatic increase.

@nuisance_carl 4 года назад

Fingers crossed!

@davidut55 3 года назад

Thats what i believe too! No way 10-15 years of burnt oil could be gone in a few days, even if you brush the piston with heaviest paint thinner cant do a set in a day.

@rezaq1 2 года назад

Dude. Wow. I have a Saab 9-5 Aero B235R with 120, 120, 30 and 150. Saab technical in Sweden say gummed up rings. Worth trying seafoam?

@nuisance_carl 2 года назад

Definitely worth a shot.

@Projectchasingthewild 2 года назад

have you tried it yet? what are the results?

@rezaq1 2 года назад

@@Projectchasingthewild yep. To be fair I’m not sure it was the seafoam or just lots of cranking etc but the car runs perfectly and has continuous 220psi in each cylinder, which is indeed textbook

@BronXTheBest 2 года назад

I see you got the car running, safe to say it fixed your problem?

@nuisance_carl 2 года назад

Yes, but the motor blew up lol probably tuning issue though

@BronXTheBest 2 года назад

@@nuisance_carl sheesh lol I feel like these things always blow up lol

@nuisance_carl 2 года назад

@@BronXTheBest There's plenty of good running M54's out there. People underestimate the importance of a tune (I DIY'd mine, so sums up why mine blew). Even the almighty 2jz's and LS's blow up from bad tunes.

@BronXTheBest 2 года назад

@@nuisance_carl oh yeah for sure, everything blows up at some point lol. I’ve blown up more m50s than I can count, but it’s amazing that this worked for you!

@Leo-tc8vc 4 года назад

any update since this vid? are you still seeing normal compression?

@nuisance_carl 4 года назад

Haven't started the motor yet. I'll update once it happens!

@erikg6905 4 года назад

Did your compression still the same!! Having the same problem going to give this a try

@erikg6905 4 года назад

Haha stay the same

@nuisance_carl 4 года назад

E G haha haven’t started it yet. Rip

@OjinglesavageO 3 года назад

Nuisance_Carl have you started it now

@ReignofStorms 4 года назад

Dude i'm so stoked for you! You probably have already seen this youtuber, but his channel is Cody Aplin. He has an m52Tub motor boosted. In one of his videos he goes over various turbo setups for e46s and recommends A Garret GT3582 Turbo with a 82 rear housing for an M54 application. Anyways, can't wait to see your process as I have a stock manual 330i with the m54 myself! Heres the video that I mentioned. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Lf5l-nW9nO0.html

@nuisance_carl 4 года назад

Thanks! And yes, I've come across his channel before 👍

@acef_performance8416 4 года назад

He has m54 325

@acef_performance8416 4 года назад

DJ Coin Laundry that is true we don’t know and he is from Australia 🇦🇺 and the world may never know 🤔 😂 but I love his videos, and maybe one day we can all kick it and talk shit on each other’s cars

@sebastian993 Год назад

you're supposed to perform a compression test when the engine is at operating temperature. mechanics rarely do this

@nuisance_carl Год назад

Sure, if the motor is already in the car. Nobody is putting that kind of work in when determining if their newly acquired motor is worth swapping in.

@djcoolkid100 3 года назад

If you've watched the 50s kid you should know harbor freight compressor tests are bad. A bit late to the party but yep

@nuisance_carl 3 года назад

Worked for me.

@djcoolkid100 3 года назад

@@nuisance_carl yes they do work but you'll most likely get a lower pressure

@nuisance_carl 3 года назад

@@djcoolkid100 Possibly, but I'm looking for cylinder to cylinder variation, not absolute compression numbers. As long as your gauge is repeatable (which I verified it is), then you'll be able to accomplish this.

@BMC_self-invent 4 года назад

Your piston rings were gummed. Seafoam cleaned them

@nuisance_carl 4 года назад

That’s what I’m hoping!

@ItsCertified 3 года назад

@@nuisance_carl 😂🤣🤣 wait why in the hell have you not cranked or started the engine? Is this some type of sarcasm? Where's the car?

@nuisance_carl 3 года назад

@@ItsCertified I've started it. Just haven't let it get up to temps yet because I'm finishing up the exhaust.

@ItsCertified 3 года назад

@@nuisance_carl so checc this out. I'm having the same issue. I've tried the seafoam it worked but then the car cuts bacc off as if it lost compression again... I'm confused at this point

@miguelvega8241 Месяц назад

I have 6000 dollars spent already on this engine it will be my last try 😢

@makgstefan 4 года назад

all good with the video great results but just a mention. This music is so annoying! I mean we can't listen you because the music is lauder than your voice. Better not to have music when you talk. Friendly mention don't take it wrong.

@nuisance_carl 4 года назад

I welcome all constructive criticism. I've already started addressing that in the past couple videos by adjusting audio levels, but I continue to fine tune it with each video.