iCarSoft OBD Diagnostic MB 2.0 For Mercedes Review 

yes :)

I think you need STAR to do that...

@@killerhertzmercedes I'm getting it tomorrow so will let you know. I have the ESP/ABS inoperational warning message plus Speedometer and Odometer NOT working.

@@mascho22 what's the update?

@@ambientsounds1416 It had the same level of functionality as my Autel Diag Link so didn't keep it. Turns out my Yaw sensor was fine but the ABS control module was bad. Got a used one on eBay (plug and play) and problems went away

Only Mercedes STAR Diagnostic/Xentry system can do this.

You will need to get it on a STAR diagnostic system for that im afraid.

historic means it had that fault a while ago but doesnt have it anymore

You should be able to via the CR Max unit (check my review) - however they will of course return unless you fix what is causing the issue.

A quick Google suggests it wont work with a W140 im afraid :(

it does work with w140 but you need the carsoft 38 pin adapter

Possibly!

Nothing to stop that im afraid :( - keep an eye out!

you drive the car and error codes pop back up ?

Yep. I myself considering buying this to take with me on a E350 hunt.. guessing I will 'Smart Scan' > then just click thru individual modules to see .. but guess it will just say 'no fault found'.

@ramsport. So very true. I won't place a link, but it is certainly worth a Google to the following company. Bavarian Dominator - The Review Centre

@@johncrawford4064 Notorious!!!! See "Beware iCarsoft, Mercedes Forum"

This will clear them, however if you don't address what causes it, it will return. check out my other iCarSoft video.

Mine only gives that code when it's frosty out. I think it is just the cameras can't see.

You need to diagnose what the actual issue is first, likely something with the Braking System. Take it to a garage or scan it (if you have a tool) to find out what is going on.

Need to replace the aux battery, located in the trunk. It’s a smaller battery dedicated to brake hold system.

@@jonathanboeckling8401 thanks Jonathan ill give that a try

Yes it should do.

Yes it should, it reads any errors reported to the car.

yes, it will say, "DANGER TO MANIFOLD"

Afraid not

是的，我买了但对斯宾特2019无法链接。

It should do, also check my other video where I actually film it in a G-Wagen: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Db5Z3AAEoqc.html

Only if the engine light has been triggered itself.

Yes, however check out my other video for the more advanced model.

You will need to get it on Star diagnosistic machine to find out exactly what is going on.

@@killerhertzmercedes Exactly what I was didn't want to hear. Thanks thought.

@@SR1Records Icarsoft will give you an error code of what the issue could be. However often this will related to multiple issues. Check my review of the Icarsoft CR Max which is even better

Yes it will :) - Check my other video also for the CR Max version.

Yes, but if you don't fix what causes the issue it will return.

It works with any make. it's just that I'm a Mercedes channel which is why I focused on that. check out my other CR Max iCarsoft review.

Have you actually fixed the issue? clearing the code will be pointless unless the underlying issues being fixed otherwise the code or reappear again instantly

If you select the OBD Check menu, it displays the fault which is causing the Check Engine Light. However if you have multiple codes you can search manually through the various modules.

@@killerhertzmercedes ah, i see! 👍🤠 Well, thank you for clarifying that. I think i will buy this scanner now then, i was a little bit ify being unsure about the practicality of manually searching for codes, if this reader does that effectively then it seems to be pretty good value and a simple way to obtain the correct MB fault codes. Thankyou

@@TECHNOCHAD it tells you the code straight away but only if you have a check engine light on, otherwise you have to laboriously go through every module one at a time which is ridiculous. It needs a software update from the dev team to immediately show post scan if there are any errors.

@@tiggersmith7393 yeah nah im still trying to "experiment" with mine, it def needs logic user interface rejig. it seems to run quick test and have things found eventually. my main need for it was to make sure codes are accuratish enough, which it seems to be.

Great question!!! I want to change the oil in the transmission 722.9 and I need to monitor the temp!

@@marcelcovaci9922 I would like to know that too before I would purchase.

@@nickplenzick2602 so I did the transmission oil fluid replacement without a reader. I had a temp gun, from Lowe’s. I filled the transmission with 5 liters, I disconnected the return line from the transmission cooler to the transmission. I had someone start the car while I was holding a container at the disconnected return line. The container was one of the transmission oil bottles, so I was draining 1 liter,stop the engine, pump 1 liter of clean fluid back in. I did this process several time( 4 times) until only clean fluid would come out from the cooler. This way I flushed the torque converter and cooler. You know you have the correct amount of fluid, the transmission is warm, when removing the plug there is just a small streak. If there nothing coming out, you need to add more. If it pours out on a solid steady stream than you have too much.

@@marcelcovaci9922 so where did you take your temp at?

@@nickplenzick2602 right after the torque converter. I would drive the car around a bit because the transmission takes time to get warm. I prefer driving it instead of putting in drive/reverse and have my foot on the brake. That’s not good at all. I put my car in P even at driverhru’s

Yes 👍

Yes!

@@killerhertzmercedes and will it reset or clear SRS light?

You mean iCarsoft device. :)

@@jamesm1710 fixed :)

Guess that's a yes !!!

Hi, sorry just seen this. - no you cant :) Also check out my view of the CR MAX version aswell: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Db5Z3AAEoqc.html&ab_channel=KillerHERTZMercedes

You managed to do this? It says it does a regen, I’m looking at buying one only to do a regen lol

@@enxhimerdani7347 What does regen do? I drive c207

It can clear the code, but it wont fix what is causing the issue. address the issue or it will keep occuring.

@@killerhertzmercedes Thank you for answering my question. I have an SLK 55 that went on hard limp mode after the battery drained. I disconnected it and charged it up and the car still had check engine light on and still in limp mode. I took it to an indy and all they did was to clear the codes and that took the car out of limp mode. I just don’t want to keep getting my car towed to the the shop every time I need a new battery just to get the car out of limp mode. Anyway I appreciate your answer.

@@odoylerules9988 What did the codes say?

No... why would you want to? how would you know when it needs topping up?

I cleaned my adblue and did a stage 1.5 tune the best money spent

unless you fix the cause of the faults, they will of course reappear.