iCarsoft CR Pro+ Unbox Review and Comparison to CR PRO - Is this the best DIY Scan Tool?

Подписаться 13 тыс.

Просмотров 4,9 тыс.

50% 1

🔧🔧 DrewFixIt STORE: www.drewfixit.com 🔧🔧
In this video I Unbox, Review and Demonstrate the iCarsoft CR Pro+.
This is where to purchase this tool:
Amazon (US and General): amzn.to/49ddzU0
Amazon (Australia): amzn.to/4bmqXH8
Because I already own the iCarsoft CR Pro Scanner in this video I do a side by side comparison between the upgraded iCarsoft CR Pro+ and CR Pro Scan Tools, highlighting the differences between the two tools. Whilst this Scan Tool is sold as a Scan Tool for an extensive list of vehicles, in this video I personally demonstrate the tool using my Mercedes and Audi.
I own and have previously demonstrated the following iCarsoft iCarSoft Scan Tools:
* iCarsoft i980 Scanner for Mercedes
* iCarsoft VAWS II Scanner for VW/Audi/Skoda
* iCarsoft CR PRO
You can see previous videos that I have done here: • Using iCarsoft Scanners
I trust that you enjoy the video and if you would like to support the channel on an ongoing basis then please do consider joining the channel as a Member. I have deliberately kept the cost of the membership levels low, please check the membership levels out here:
/ drewfixit

Авто/Мото

Опубликовано:

6 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@rodolfocolon 4 дня назад

Hello can this device can Used for Mitsubishi L200?

@lvitoralmeida4449 21 день назад

In CRPRO+, it have a function to see the real KM in odometer?

@simonblanck8637 4 месяца назад

Just a tip. Because an item is new does not mean it comes with the latest firmware/software. It can be the case that this unit has been on a shelf for a lot of months since manufacturing. Maby you had already checked. I do not know, but its always good to check before use. Apart from that. Good video with much information. Keep it up!

@DrewFixIt 4 месяца назад

Hi Simon, you are correct yes I should’ve checked the firmware. Shall I make another video to show how to do this? Cheers Drew

@mrb9502 4 месяца назад

@@DrewFixIt yes Drew please make that video and how to relearn sensors.

@KT-TV 2 месяца назад

Agreed. My iCarsoft V3.0 was two updates old out of the box. Updating was simple and fast though but don't disconnect it until the unit itself says the update has been fully loaded. Great video

@fear19891 Месяц назад

Hey, I just got mine the other day and it worked fine on my Volvo until I decided to update the software... what a mistake that was... Would you be able to send me the files on your SD card for the software? I need the working version of it as mine after the update is dead , it won't even turn on when connected to the car. I believe the files in System folder are corrupted after the update, so at least I need the whole folder from a working device. Thanks, Daniel

@morgan8937 5 месяцев назад

Interesting TY. Would you go for the pro if you only had an Audi considering the limitations you found of the device on Audi? Or have you used other scan tools that play better with Audi? Mines a 2009 Audi A3 1.9tdi. I could have used a scan tool last week after having the ABS pump and module go at 89,000 miles Also I need to confirm what I suspect might be an ecu/ cluster fault. I always want to know the littlest issue that's not on my radar. Maybe it can have a knock-on effect to other issues otherwise?!

@DrewFixIt 5 месяцев назад

Hi Mate, excellent question! What was interesting is that whilst it was annoying having to select the Model in the year range I do not recall having to remember the engine code for the AUDI with the CR PRO, however having said that my gut feeling tells me that iCarsoft could fix the issue in a software release with some VIN lookup code. I think if you couple this thought with the fact that the CR PRO+ has so many additional maintenance functions potentially available then I would definitely go for the CR PRO+. I hope this helps? Cheers Drew

@morgan8937 5 месяцев назад

@@DrewFixIt It helps a great deal. Thank you very much for taking the time and putting it on my radar!! Til next time! 😊

@mrb9502 4 месяца назад

Will it also relearn a crankshaft position sensor? Thanks

@DrewFixIt 4 месяца назад

Yes mate!

@peetkotze3390 17 дней назад

You have a new subscriber @@DrewFixIt

@peetkotze3390 17 дней назад

Thank you for asking you helped me may have crank and cam sensor problem as well 😊

@DrewFixIt 16 дней назад

@@peetkotze3390 no problems, welcome to the channel! Out of interest, what make and model of car do you have? Cheers Drew

@peetkotze3390 16 дней назад

@DrewFixIt Thank you very much .Its a w202 c180 beautiful car was my dad's they tend to have electrical problems as well but other than that solid cars.

@user-dh2te2cm2d 4 месяца назад

just buy the cr max, drives under android, little more expensive ,but fas easier to use

@DrewFixIt 4 месяца назад

Hi Mate, besides being more expensive for me CR Max is bulkier (as I explained in the video), has a internal battery which will die eventually and actually offers no more functionality over the CR Pro+ thus for me CR Pro+ is the clear winner! But each to themselves :) Cheers Drew