Ideal Logic Combi Heating Boiler F1 Fault Code Fix Repair | How Topping Up Refill Increase Pressure 

Hey Fred, Thanks for your appreciating words and great to hear the issue is now solved :-)

Hi, urgent help, I have same boiler, how did u do it

@@periodtpuurrr6785 Hi, This is how I fixed my flashing F1 light boiler problem. First, look for two black levers where your boiler is, the levers on my boiler are found at the back of the boiler (the old fashioned big round metal tank) in a small cupboard. The levers for your boiler may be found in a different place, (probably in the kitchen, or even in the cellar) Once you have found these two levers, turn them both anti clockwise, (a quarter turn should do it) you will then hear a hissing noise from your boiler as the water pressure rises, after about 20 seconds or so, turn the levers back to their original position, (a quarter turn clockwise) if you leave it too long before turning the levers back, you will hear a loud juddering noise from your boiler (which means the water pressure is too high) but as long as the levers are turned back to their original position, your boiler should run as normal (eventually). That's what worked for me, so I think you should be okay 👍. Good Luck.

Great to hear! Glad I could help :-)

Hey Edidiong, Glad the video was helpful :-) Cheers!

Hey David, Glad the video was helpful :-) Cheers!

Hey, Glad to know it helped! :-)

Hey, Great to know the video helped :-) Cheers!

Hey, Glad the video helped! Cheers :-)

Cheers mate :-)

Hey, That sounds Excellent!

Hey, Glad it helped! You’re welcome 😊

Hey, Glad the video helped :-)

@@bicyclecolours8988 really did , thanks

Hey Robert, You're very welcome! Glad the video was helpful.

Hi Varun, Glad the issue is resolved now. Thanks for sharing your experience, hope this helps other viewers. Wish you a very Happy New Year!

Thanks for this wasn't sure if I child turn the screw..I did with after reading your comment and it's back working.

Cheers mate! Happy to help :-)

Hi Santy, Glad the video was helpful. Cheers!

Hey, Glad it was helpful! Cheers!

Hey, Glad the video was helpful :-)

You are welcome my friend 😊

Hey, Great to hear this :-) Glad video helped!

Hey John, Thank you! Cheers!

Hi Tobias, Great to hear that :-) Cheers mate!

Hi Jasmine, Can you ensure and check - 1. Mode knob (A) is in winter position? 2. Check the timer is in an “ON” position and the room thermostat is turned up?

Hey Naveen, Glad it helped! :-)

Cheers Neil ! Gad to help :-)

Hey, Glad the video was helpful :-)

Hey, Glad to hear that, Happy to help mate :-)

Great 👍 Glad to know the video was helpful :-)

Hey Jon, Glad it helped!

Hey, Happy to help :-) Cheers!

Hi Minesh, If I understand correct in your setup the screw is the valve and in that case you need to open screw. But be aware you need to do it very slowly.

Hey, Great to know 👍 Cheers!

Hey, Glad it helped ! :-)

Hay, Glad it helped! Cheers :-)

Hey, Glad it helped! 👍

Hey Amy, Glad you liked it :-)

Great to hear this. You are welcome Sandra 😊

Hey Mervegül, Glad the video was helpful. Cheers!

Hi, Glad it helped!

Hi, Glad it was helpful!

You’re welcome 😊

Hey, Glad video was helpful!

Hey, Whenever the blue light goes ON then it’s indicating that burner is ON. It’s nothing to do with more gas consumption.

Hi, Can you pls try restarting the boiler and increase pressure as instructed. If nothing helps then I am afraid this could be an issue with the pressure in the main pipe system or boiler needs servicing. You may need to contact a plumber or boiler service engineer.

Hi, sry... not sure how to resolve if there is a magnetic filter in the line. Good to contact service engineer.

Hi, Sorry… the video is demo from ideal logic boiler. Kindly refer to instructions manual on Atlantic boiler.

Hi Liam, Sorry to hear this... The new boiler shouldn't have this issues unless if there is a leak in your piping system. The fix depends on severity and could only be recommended by an engineer after field investigation.

Hi, Just leave it for now. I guess this will slowly come down with the running of boiler.

@@bicyclecolours8988 okay. Thank u for replying. I hope it will go down..

Hi, Looks like there is some other issue with boiler and you may need support from a service engineer.

Hey, If you only need hot water and no central heating then simply turn the Mode knob to the position directing Tap symbol.

Hi, sorry to hear this. In this situation recommended to contact boiler service team.

Hello Friend, The fault F2 and L2 represents Flame Loss. Recommended actions are as follows: 1. Check other gas appliances in the house are working to confirm a supply is present in the property. 2. If other appliances do not work or there are no other appliances, check the gas supply is on at the meter and/or pre payment meter has credit. If the boiler fails to operate then please contact Ideal Boilers (if under warranty) or alternatively a Gas Safe Registered Engineer if outside of the warranty period. In IE contact a Registered Gas Installer (RGII).

Hey, Thanks a Lot! Glad to know the video was helpful :-)