No video :(

Identifying Your Classic Mini Brake System

Подписаться 30 тыс.

Просмотров 8 тыс.

50% 1

#brakes #classicmini #diy
HEL Performance Lines - cmdiy.co/helLines
Join this channel to get access to perks:
Patreon - / classicminidiy
RU-vid - / @classicminidiy
❱ Shop - store.classicminidiy.com
❱ Seven Mini Parts - bit.ly/7evenmini
❱ Instagram - / classicminidiy59
❱ Facebook - / classicminidiy
❱ Parts in this Episode:
HEL Performance Lines - cmdiy.co/helLines
Single Line - bit.ly/singleLine
Yellow Tag 1 - cmdiy.co/yellowtag1
Yellow Tag 2 - cmdiy.co/yellowtag2
Yellow Tag 3 - cmdiy.co/yellowtag3
Green Tag - cmdiy.co/greentag
PDWA Valve - cmdiy.co/pdwa
Thanks for watching Classic Mini DIY! Please note Classic Mini DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Classic Mini DIY recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Classic Mini DIY, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Classic Mini DIY. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Опубликовано:

2 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@philtucker1224 Год назад

Nice episode Cole, good to see you back again Buddy, that mini shell is looking very rust free and a great basis for the new build! Live long and prosper my friend!

@classicminidiy Год назад

Thanks so much. Yeah it’s honestly in great shape. Still had work to do but definitely not a ton. Which is nice.

@mikeking7957 Год назад

really looking forward to watching these videos and working on my mini!

@rennkafer13 Год назад

There is one other system, which is what I have on my car, yellow tag master without a PDWA, it just has a junction block. Also the PDWA doesn't affect braking, all it does is send a signal to a light to let you know if the front or rear brake circuit has failed (hence Pressure Differential Warning Actuator).

@MiniMattTV Год назад

Excellent information as always Cole. There is also one more master cylinder (now discontinued) known as the black tag which was a dual line system, due to its age it’s recommended to upgrade to the yellow tag, however, the top an bottom lines are the opposite way around in their route to the proportioning valve. Minis 🙄 New garage space looks fantastic

@hosrow 4 дня назад

Awesome video, like many others. You are so good at this, man. Why would anyone replace a newer servo breaks that has a much better feel to a yellow tag?

@classicminidiy 4 дня назад

Thanks! Most common reason is wanting to simplify the look in the engine bay or needing the space occupied by the servo for something else (eg. larger breathers, ignition coil, etc). I actually always preferred (in my mini) the feeling of yellow tag or single line brakes. The servo doesn't add enough stopping assistance to me and prefer the more raw feel in the older car. Now on my tacoma....I wouldnt wanna drive it without a servo haha.

@minimad8432 Год назад

Thanks Col, great info about Brakes. I look forward to seeing your car evolve. I need to do the same. Cheers MM :)

@classicminidiy Год назад

Thanks so much! Appreciate you watching too!!

@classicminidetails8887 Год назад

Hey mate if you need measurements I'm happy to help out. Very jealous of the fresh bad wolf shell! I want a project so bad

@classicminidiy Год назад

Thanks man. Yes I’ll send you a message as I definitely want to get those measurements. Would be a huge help. Also if you want a project….I fully support you getting another. You can tell Hailey I said so.

@emilegoguely4032 Год назад

Thanks Cole! My previous car (88) and current (92) are both LHD (US style) but had the brake booster and MC on the passenger side. I'm finding very little documentation on it. Is my servo delete better done : - Vertical MC on the passenger side, actuated by the linkage. - Vertical MC on the driver side + run a longer copper line. I'm not sure how the linkage looks like or work, 100% of unboosted brakes I've seen have always been on the driver side. The boys at SMCO seem to generally reach for the single line MC (but would a proportioning valve then be needed?) Thanks in advance 🤝 Emile from Colorado

@agustinbianchi4760 3 месяца назад

Hi Cole, I got the yellow tag using pdwa valve and something strange happened to me, luckily I am safe to say it. Got my car started since last December and moving it out found out that I got out of brakes! watched the floor and no marks at all of leaking fluids, I don´t know where it could be! Do you know any places inside / outside to check where the fluid is going? Have a great day!

@user-tt3zw9sk7l 11 месяцев назад

I have a question. I have a green tag Masterr Cylinder and was wondering if it matterred how the lines are installed. As in; does the connector closer to the servo on the Master Cylinder have to be fixed on the left side on the PDWA as with the fixed lines or can iit be installed either way?

@rocfella Год назад

Would love some help. I have a servo brake system (mk1 cooper s type) with discs in front and I was changing the robber cones in front and now my brakes are not working, the pedal doesn't build-up any pressure even with pumping it. I was moving the servo a bit to gain access to the top arm axle nuts but i left all the lines and hoes attached. What could it be, did i mess up something while working on the front suspension?