Idle Air Control Valve (IAC) Clean and Replace DIY

Подписаться 6 тыс.

Просмотров 86 тыс.

50% 1

Idle Air Control Valve (IAC) Clean and Replace DIY.
Part needed: amzn.to/3G9GzR6
You could change out the Throttle Position Sensor if it's old while you are there. Here is the link for that: amzn.to/3AagGg0
please verify this is the right fit for your car.
In this video I will show you how to remove the Idle Air Control Valve or IAC from a Dodge Ram 1500. This will be a similar process on many other vehicles. The Idle Air Control Valve allows the engine to get air when you don't have your foot on the gas. When the air intake is closed the computer opens the IAC to allow air into the engine to keep it from stalling. If this valve gets clogged with carbon or the spring or diaphragm on it doesn't open and close properly it will cause a rough idle, stalling or a high idle. This is the process to open, remove and clean the carbon from your idle air control valve. I also show you how to put it back on.
On this channel I do electronics and household items reviews as well as DIY projects around the house such as fixing cars, fixing plumbing etc.
Have a product you want me to review? Email me at smoran2006@gmail.com Please put Collaborate in the title.
Items I use:
Nikon D5300: amzn.to/2tKGD3i
Logitech C920 webcam: amzn.to/2HdnajE
Boya Lav Mic: amzn.to/2EJR5yg
Takstar shotgun mic: amzn.to/2tLgPUG
Comica wireless mic: amzn.to/2FpNkxq
Links in this video are affliliate links. If you click on any and you buy something it doesn't cost you anything more, but the affiliates (such as Amazon) will give us a small commission.

Развлечения

Опубликовано:

6 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 70

@hurpdurpsavormamma Месяц назад

Great video. Thanks Sean!

@SeanDIY Месяц назад

I'm glad it helped. I appreciate the support.

@jerrycollins5168 2 года назад

Thank you for the video. I was catching heck trying to get my truck to idle. Followed step by y and now she’s running fine.

@SeanDIY 2 года назад

Glad to hear. What vehicle do you have? When I put it back in I had issues only to realize I didn't put the electrical connector tight. 2 minutes later it was a major improvement.

@mrgreenjeans1794 Год назад

You nailed it. The IAC in the Dodge Ram 1500 4.7 can be a bear to remove and reinstall. Tight fit. I kept the TPS in place that was a mistake. Take it out too and replace it with the IAC. Last year replaced the IAC and this week the TPS had to be replaced. If you are replacing one why not replace both at same time. Use throttle cleaner spray clean and wipe down the throttle too. Rough idle can be due to a number of issues. Before pulling apart the airbox and throwing parts at the engine check your battery. Autozone checks battery capacity on site in minutes for free.

@SeanDIY Год назад

Thank you. That truck was fun to work on. I got it for $1,800 and sold it for $3,400 and had fun along the way.

@SeanDIY Год назад

Mine was a bad lodter that caused the rocker arm to come off on Cylinder 8. I did a video on that in my Ram Playlist. Once I replaced the lifters, it was still loose, so I put 2 washers under it. It May be a bad valve seat but with 245k miles on the truck, I figured what the heck.

@bigjake1627 Год назад

Sensor above is throttle position sensor ...usually well in various vehicles I've worked on the throttle position sensor (TPS) is attached next to the (AIC) air idle control valve Always both attached to the throttle body 😁

@SeanDIY Год назад

Thanks for watching and for sharing this information.

@joseirizarry8256 11 месяцев назад

Thanks nice close up video & explanation, blessings. Joey

@SeanDIY 11 месяцев назад

Thank you sir. Do you have a Ram 1500 or are you going to do this on another vehicle?

@joseirizarry8256 11 месяцев назад

@@SeanDIY Hi again yes Sir I do own a 04 RAM 1500, I bought a new Idle Air Control and I'll be replacing it soon, thanks for your feed back take care. 😏👍

@SeanDIY 11 месяцев назад

I'm glad to help. Be sure to plug it in tight, or it will stall. I speak from experience on that one.

@joseirizarry8256 11 месяцев назад

@@SeanDIY Ok thank you so much I'll keep that in mind, take care blessings to you & family. 🙏

@jzeerod Год назад

just bought an old dodge. swore never again. my brother had a yard full of them. i have a preferance for chev or ford of these years myself. first thing i learned, these do not have a MAF sensor. thing didnt want to stay running, idled badly. kept dying. that is why i am here. thinking this is the problem. thanks bud! keep up the awesome viddies.

@SeanDIY Год назад

Thank you for watching. I feel like mine does have a MAF inside the air intake.

@jzeerod Год назад

@@SeanDIY hehe yes indeed, but alas, "a MAF by any other name"

@beavisroadhog9629 5 месяцев назад

It does @@SeanDIY

@SeanDIY 5 месяцев назад

Is it working well now?

@deantoniothurmond5320 Год назад

Have this problem too i just got a tune up because my 2005 jeep grand Cherokee would stall between 40-60mph the tune up fixed thatt but the hard idling and stalling came back! And service engine light still is there Im like really so maybe this is what i need 🤦🏾🥺 it’s never enough with this jeep but i must say it has held me down i had it since 2020

@SeanDIY Год назад

Jeeps aren't known for their reliability. It's worth a shot because it doesn't cost much but time and a bit of cleaner. .

@JayPa-qk9vj 2 года назад

Thanks for the help with this how to video

@SeanDIY 2 года назад

I'm glad to help. Was your vehicle idle running poorly? Were you able to fix it with this video?

@JayPa-qk9vj 2 года назад

I did clean it but it failed now truck won't start so plan b replacement part needed it's 20 years old it had it's hey day.

@SeanDIY 2 года назад

@@JayPa-qk9vj I'm assuming you let it dry out completely before installing again? Also mine would start but die if I wasn't hitting the gas. I realized I didn't put the sensor back in place thighs enough. So the computer didn't know when to open the air control valve. As soon as I snapped the sensor in tight it worked fine. Worth a try?

@JayPa-qk9vj 2 года назад

I did let it dry in the hot sun for awhile first but I took a closer look at it and its way to hard for me to move the inner part by hand so I believe it's stuck so it won't work no lower I got a new one today still no luck with it so it's got to be a different problem then just that valve

@SeanDIY 2 года назад

Sorry to hear that. I have a whole Playlist of videos.I did on this truck. Are there any check engine codes?

@1980sandra 2 года назад

Hi there! I watched you GizmoWatch Band replacement video from 2 years ago. One of the prongs (on the actual watch face) on my sons Gizmo Watch snapped off. Now I can’t even put a band on, on one side, so he can’t even wear it. Do you have any ideas of what I could do or if there’s a type of band that could hug the watch so he could wear it? Thanks.

@SeanDIY 2 года назад

Thank you for watching this video as well. I hope you found it informative. I answered your comment on the other video. Thank you for coming back and watching another one of my videos.

@DSchwizle96 2 месяца назад

Very clear video- although very vague on the spray you are using. I assume its brake clean?

@SeanDIY 2 месяца назад

I would not use brake cleaner as it could damage the diaphragm. There is a specific cleaner for the idle.air control valve.

@user-gh9ss7ir2g Год назад

Hello, above the idle control valve it's called the TCS sensor (it's a black device right above the idle control valve.

@user-gh9ss7ir2g Год назад

I'm very sorry my comment before I said TCS, no it's called a TPS SENSOR THANK YOU FOR YOUR VIDEO. SORRY FOR THE CONFUSION

@SeanDIY 11 месяцев назад

Thank you for sharing your insights on the Ram 1500. It's appreciated.

@user-gh9ss7ir2g 11 месяцев назад

@@SeanDIY your welcome 😇🙏🤗

@evergomez504 2 года назад

My battery is currently dying every time I go to turn it on. I recently replaced it and it still dies. Could this be the cause for that? My heat goes out every time I am idling. Are both these issues somehow connected?

@SeanDIY 2 года назад

If your battery keeps dying, I'd check the alternator. That maybe the issue at idle too if it's not producing enough power.

@jpn234 16 дней назад

Hey are you able to show where the breather hoses connect? I disconnected mine and dont know where they connect. Theres 2 on back end of the engine and 1 bottom near passanger

@SeanDIY 16 дней назад

I wish I could but I sold the vehicle. You cN probably find a schematic. I'd also check to see if the hoses fit in one orientation more than the other.

@jpn234 15 дней назад

@@SeanDIY Thanks for responding so fast, sadly no luck with schematics for my exact model.

@thealmarty Год назад

I have a 2007 Dodge Ram 1500 with the 3.7L engine but mine doesn't have the idle control valve on the side where you are pointing to. Is this a different year or engine size?

@SeanDIY Год назад

This is the 4.7L Magnum V8.

@anazjepeterson5920 17 дней назад

thats what im saying i cant find it on mine

@carlosguillen1152 Год назад

I clean the troattle body just with a wet napkin an cleaner just to make it look decent an not cause problem with it, well i bolted back on , turn on the motor rpm are an between 1500 an 1800 don’t know what to do

@SeanDIY Год назад

Did you check that it moves back and forth freely? It's possible it's stuck more open than it's supposed to be..Did you also give the engine time to regate when you pit it back in? It could take the computer a bit to figure it out. If the latter doesn't work, inspect it, clean it again and replace it if its.damaged or not working.

@carlosguillen1152 Год назад

Thank you

@SeanDIY Год назад

Is it working better now?

@YungHittaz813 Год назад

Would this faulty or dirty piece cause my car to stall when turning the AC on? My car is also idling very rough and feels like it might stall when stopped

@SeanDIY Год назад

It could. Check out my latest video on cleaning out your intake as well. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cxdUyQoflKY.html It could be a combination of those things and maybe even a few others like dirty injectors or an air filter that needs to be replaced. Here is a list of what I would check. . ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YN4u_rBltlg.html

@johncarreno5066 Год назад

I think this is my problem. Had my fuel pump changed, thermostat stuck open changed. My neighbor (a great mechanic) changed the crank sensor that the computer was telling him it was that because my truck would just stall. He ended up cleaning inside the carburetor area with paper towels. Lots of gunk because I think it was caused by the air intake hose fell off. Taking in fresh air not filtered. Started working fine again. The other night it started putt putting a little after idling in traffic. Caused me to scream, wtf now? Lol! I think it's this. Air control valve. Sounds just like it. Also, what lead me to this, I was looking on why my rpm was stuck on 1 and when I stepped on the gas driving I noticed my battery indicator went up and lowered when idling. Suggestions? Could it be the air control valve?

@SeanDIY Год назад

Well, if air was getting in unfiltered that could be really bad for the engine because dirt could be getting in with the air. I would try this and also test the electrical connections on the iac valve and the connector going to it. I can tell you that when I was done cleaning it I forgot to plug it back in and it would stall right away. Assuming it drove well, it may not be that issue, but worth taking a look. I would also look at the spark plugs and also get Techron for the fuel in case it's clogged injectors. I wouldn't keep throwing $ at it until you are pretty confident you got the issue.

@johncarreno5066 Год назад

@@SeanDIY thanks for the info. Just to give you a heads up on what type of truck I have, it's a 2010 Ram 2500 5.7 hemi. In such mint condition when I bought it that I thought it was a 2018 looking at it. So, I would also like to add that I had a new fuel pump installed. Gas gauge was broken. They put another one it but when my gas gauge is at a 1/4 tank, the gauge will drop to E but a few minutes later it will eventually go up. This has happened several times and I need to bring it back in. My spark plugs were checked. He said they still look good but suggested changing them in 6 months for a peace of mind since I'm at 124,000 miles

@SeanDIY Год назад

@John Carreno I hope you find the issue. I'm thinking the gas gauge issue could be electrical? Hopefully it was never in a flood.

@jamesbison7560 Месяц назад

Can it make your vehicle shut off while braking hard

@SeanDIY Месяц назад

I'm not positive, but if I remember correctly that may be a possibility. I can tell you if the electronic plug isn't connected you can't even get the car to stay running. This controls the air at idle, so if it's starved for air, it may just shut down under brake load. It's worth giving it a cleaning and see what happens.