IH 484 Brake Equalizer Rebuild

Подписаться 468

Просмотров 1,8 тыс.

50% 1

Rebuilding an International Harvester 484 brake equalizer. This is the last major thing before I can fire the tractor back up and see if we have fixed the hydraulics issues.
The rebuild kit on this is around $250 before shipping. It comes with seals, o rings, springs, ball bearings, c clips, caps etc. All of my individual components were fine, but it was just leaking. So I did some investigation and found the o-ring part numbers and the seal part number so you can order them individually and spend less than $30!
Seal part number: 529762R91 qty 1
Small O-ring: 9672548 qty 2
Large O-ring: 165202 qty 2
Hope this helps the one other person in the world that needs this. If it did, please comment and let me know!
Check out my website www.joshofallt...
Instagram: / joshofall_trades
Facebook: / joshofalltradesblacksm...
TikTok: / joshofall_trades

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@simonb7674 День назад

Thank you very much for your efforts. helped a lot.

@Black240SXDrift День назад

@@simonb7674 I'm glad!

@kevinsmyth1562 6 месяцев назад

I bypassed mine. A lot of savvy fellas believe that’s best. For some reason they usually leak after rebuilding, and some guys even believe the equalizer valve is potentially very hazardous. I’m still trying to understand what its purpose is.

@PaulHarris-c1k Год назад

no worries thanks josh like your videos im from australia is it hard for you to check see if they fit i tried to find part numbers but can only find the kit in the parts list really appreciate it if you could

@Black240SXDrift Год назад

If you found the kit, it should have a part number for the whole kit. If that part number matches the part number for the whole kit for a 484 then these seals should work for you. If not, a lot of googling to try to find a breakdown of the seals in the kit with their part numbers or sizes is what I did. But I would just check the website you found your kit for and look up the kit for the 484. If it's the same part number, you're good. I would imagine they would be similar.

@PaulHarris-c1k Год назад

thanks bro for you detailed reply will do that have a great day

@Black240SXDrift Год назад

Good luck man! Hope it works out to be the same!

@PaulHarris-c1k Год назад

does that seal and orings fit the 584 tractor my equlizer valve looks exzacly the same as the 584

@Black240SXDrift Год назад

It's possible, but would have to check numbers and see if the "rebuild kit" has the same part number for both. If so, yes, if not... possibly.

@mikehaas100 11 месяцев назад

Are there any leaks since you've been using it? I had my equalizer apart and replaced the regular o-rings because I had them on hand but didn't replace the seal. It still looked good so I put everything back together. Now when both brake pedals are pushed and the equalizer rod comes out oil leaks past that seal. When the the rod is in there's no leaking. I'll probably have to take it out again and replace that seal but was curious if it seemed to work for you. Thanks for the video it helped alot.

@Black240SXDrift 11 месяцев назад

I haven't had leaks from it yet. Maybe pulling it was enough to cause it to leak?

@mikehaas100 11 месяцев назад

Yes that's possible. Something leaked before I took it apart but it was so dirty it was hard to tell from where. I only took it apart because I put a new clutch and flywheel in and it was easy access at that point. I redid the master cylinders as well. I'll get that seal and put it in and see how it goes. Thanks

@kevinsmyth1562 6 месяцев назад

You need to leave the equalizer in place if you bypass it, otherwise you can’t adjust the pedal height. It’s a weird setup.

@Black240SXDrift 6 месяцев назад

Interesting. Mine isn't leaking thankfully. We'll see how long that lasts lol