Тёмный

Impact Driver Restoration Black & Decker 14.4V 

Gear Show
Подписаться 694 тыс.
Просмотров 128 тыс.
50% 1

Impact Driver Information
● Voltage: 14.4V
● Maximum tightening torque: 135N / m
● Switch type: stepless speed change
● Rotation speed: 0 to 2850 rpm
● Number of hits: 0 to 3150 rotations / minute
● Charging time: Approximately 40 minutes
● Battery type: Nickel-metal hydride battery
● Maximum capacity: Screw tightening 125 Normal bolt M12
● Maximum working amount: φ4.1 × 38mm Approx. 390
● Body mass (including rechargeable battery): 1.85 kg
accessories
This is a Japanese original model that can easily handle the tightening work of long screws and large nuts.
14.4V Battery Pack Original
● Number of Nihm : 12 cells
● Voltage range 13V ~ 17V
● Capacity: 1.7Ah
14.4V Battery Pack New
● Number of Lithium 18650: 8 cells
● Voltage range 12.8V ~ 16.8V
● Capacity: 6Ah
18650 Lithium-ion battery
● Brand model: LG INR18650HG2
● Standard capacity: 2800- 3000mAh
● Rated voltage: 3.6V
● Charging voltage: 4.2±0.05V
● Maximum continuous discharge current: 20A
● Discharge cut-off voltage: 2.5V
● Weight: Max.47.0g
● Size: Max.18.2×65.2 mm
● Charge and discharge times: 500 times
BMS 4S40A
● 4S 16.8V 40A lithium battery protection board (comes with AUTO recovery function)
● Can use with 3.7V lithium battery
● Charging voltage: 16.8V-18.1V
● Continuous discharge current (upper limit): 40A
● Continuous charging current (upper limit): 20A
I hope you find this video useful and enjoy!
I am happy to receive feedback, suggestions to improve myself.
!!! I'm sorry for the mistake if I did this video !!!
** I still keep some parts, I want to help the world environment **
Thank you very much for your likes, comments and subscribe!
Have a nice day
Gear Show

Хобби

Опубликовано:

 

2 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 229   
@brucefleming3309
@brucefleming3309 Год назад
Upgraded from an older 18v kit. ru-vid.comUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
@electronixTech
@electronixTech 3 года назад
With all the attention to detail like properly greasing the gears. cleaning, repainting and upgrading the battery pack you made it better than new.
@gear_show
@gear_show 3 года назад
I'm so glad to hear that, thank you!
@thanh_st.03
@thanh_st.03 3 года назад
Very good camera 🤳
@kret63
@kret63 3 года назад
Very good job. I love to watch those batteries getting swapped! Also hope that hand heals good and fast! Keep on filming!
@gear_show
@gear_show 3 года назад
I hope so, thank you very much!
@rabk5702
@rabk5702 3 года назад
Another grand job returning impact drive to active service nice posting (:-)
@MeilyFoodie
@MeilyFoodie 3 года назад
Amazing Work Brother ❤️❤️❤️❤️
@gear_show
@gear_show 3 года назад
Thank you so much 😀
@arsenmajaryan7109
@arsenmajaryan7109 3 года назад
As usual, amazing work. One question - what software do you use to create the stickers ?
@gear_show
@gear_show 3 года назад
I use Adobe Photoshop to create those stickers.
@miguelare3
@miguelare3 3 года назад
Will never get bored of your videos GearShow!
@gear_show
@gear_show 3 года назад
Wow, I'm so glad to hear that.
@ngophat7781
@ngophat7781 3 года назад
Anh trai mấy con tem của hãng á anh mua ở đâu vậy anh trai.
@troyna77
@troyna77 3 года назад
Gear Show is "Saving the planet one power tool at a time."
@maxpower8953
@maxpower8953 3 года назад
First of all and as always a great video. Can you clarify for me how or where do you get the original stickers for the screwdriver?
@gear_show
@gear_show 3 года назад
Thank you, I made those stickers by myself.
@dahlesa
@dahlesa 3 года назад
Engineers must have a lot of of fate on those two tiny ball bearings wich are holding that massive spring.
@yeagerxp
@yeagerxp 3 года назад
Excellent work👍👍👍 . Thanks for sharing
@catalinux
@catalinux 3 года назад
Great job! Very inspiring video! What are you using to restore the product labels? If you can provide the exact name/series and the process (inkjet/laser/uv maybe). It looks very good with these details.
@gear_show
@gear_show 3 года назад
I re-made those labels in Adobe Photoshop. You can use high resolution inkjet printer with A4 coated matte silver self-adhesive.
@Yorumcu63
@Yorumcu63 3 года назад
Great restoration like others .Could you write a buying web adress at 16:05 charger and did you draw Black&Decker sticker labels or have a web site for this kind stickers?
@zahidhasan125
@zahidhasan125 3 года назад
I just love your restoration ❤❤. Can you please tell me where can I find these drills for restoration?
@gear_show
@gear_show 3 года назад
I bought them from Japan used products container.
@CarsRestored
@CarsRestored 3 года назад
Me: No way he can restore this Gear Show: Hold my tools
@God_Dmitriy27
@God_Dmitriy27 3 года назад
И снова шуроповерт. Удивил так удивил😄
@gear_show
@gear_show 3 года назад
То же самое, но другое
@TheJoeBarbaro
@TheJoeBarbaro 3 года назад
Не совсем это шурик, это импакт, гайковерт короче говоря))))
@God_Dmitriy27
@God_Dmitriy27 3 года назад
@@TheJoeBarbaro знаю. Но по сути ударный шуруповерт. Гнездо под биту.
@TheJoeBarbaro
@TheJoeBarbaro 3 года назад
@@God_Dmitriy27 Да. Конечно дрель разделили на более узко специализированные инструменты)))) Понапридумывали)
@arelectronics4639
@arelectronics4639 3 года назад
Plz make more and more Videos Like this............ AWESOME 👍
@gear_show
@gear_show 3 года назад
I will try my best
@arelectronics4639
@arelectronics4639 3 года назад
@@gear_show Hello Sir here is a one question ❓ Sir, which BMS circuit do you apply to the 18 volt drill? 4S or 5S.....? Plz Reply 🥰
@girthquake1413
@girthquake1413 3 года назад
Hey Gearshow, love the content and I might follow in your footsteps soon. What BMS'es do you use for your packs?
@gear_show
@gear_show 3 года назад
Glad you love my content, I use 4S40A BMS.
@forestlampcraft472
@forestlampcraft472 3 года назад
SUPER!!!
@allianceofvengeance
@allianceofvengeance 3 года назад
I love your videos. Thank you.
@gear_show
@gear_show 3 года назад
Glad you like them!
@OrbvsTomarvm
@OrbvsTomarvm 2 года назад
it is tru dat yo cleen everting wif creme soda is dat rite.. .,? .
@gear_show
@gear_show 2 года назад
I clean it with detergent powder.
@imanhasan1997
@imanhasan1997 3 года назад
very nice bro
@gear_show
@gear_show 3 года назад
Thank you so much 😀
@rudolfzaris675
@rudolfzaris675 3 года назад
Hi, I used the same BMS board like you, but the dril doesn´t want to accelerate properly. It stops when the triger is fast pressed. When I bypass the BMS , drill works perfect. Maybe the BMS cut off the power because the bateries are salwaged ones form notebook, in order to prevent owerheating . What do ou think? Thanks.
@gear_show
@gear_show 3 года назад
I think you have problem with the switch.
@rudolfzaris675
@rudolfzaris675 3 года назад
​@@gear_show well this is good point, but why it worked well with 4S battery pack without BMS ( test run only ) and with the BMS board it cut of power when the switch is quickly pressed. When I press the switch gently, it works, but when is more load pushed on the chuck, it stops again..
@kadirince
@kadirince Год назад
Harika. Hatta etiket olayı profesyonel.
@oldriver1478
@oldriver1478 3 года назад
Great job as always. Can you tell me what kind of printer and paper you use for the stickers ??
@redheadknight6297
@redheadknight6297 2 года назад
I'm asking myself the same question. ^^ He should say everything in the description. : )
@zik316
@zik316 3 года назад
I never miss any of your videos and I love them all. :)
@gear_show
@gear_show 3 года назад
Wow, thank you!
@makitamyth
@makitamyth 3 года назад
How to remake the nameplate ?Can you make a video to teach me?
@gear_show
@gear_show 3 года назад
Yes, I will show the way how to make the sticker one day.
@makitamyth
@makitamyth 3 года назад
@@gear_show Thank you for your sharing.😄😄😄
@lynmidl86
@lynmidl86 3 года назад
Ну что сказать? Просто супер вообще классно. Не зря на вас подписан
@fishyboney
@fishyboney 3 года назад
The last screw in the log was done by another machine that was yellow in color
@jacfruitsplants
@jacfruitsplants 3 года назад
Sir,In 14 watts dril,You need 8 pcs Litium 3.7 in series connection and 4s 40 amps BMS?Thank you sir...
@RESTORATIONOFSCRAPMETAL
@RESTORATIONOFSCRAPMETAL 3 года назад
cool job as always.👍
@gear_show
@gear_show 3 года назад
Thanks again!
@yapayelektronik504
@yapayelektronik504 3 года назад
Hi MY Türk Türkiye hello. 👋👋👋 Little spekeng englij. Sorry
@jenntek.101
@jenntek.101 2 года назад
@16:16 (or there about). You didn't use that burned circuit board did you? What did you choose to replace it? Anything?
@ROBINSON-q1g
@ROBINSON-q1g 3 года назад
exelente video, tambien hize lo de las etiquetas con un taladro que tengo....
@gear_show
@gear_show 3 года назад
Gracias, eso es lindo.
@piastpluk
@piastpluk Год назад
Dla czego nie zmieniłeś silnika, silnik szczotkowy bez możliwości ich wymiany, więc szkoda go zostawiać, troszkę bez sensu. Skoro padły baterię to; n już sporo przeszedł.
@Xvapezz69
@Xvapezz69 3 года назад
Wonderful content. I think encouraging to other as well
@gear_show
@gear_show 3 года назад
Thank you!
@dedehizaz287
@dedehizaz287 3 года назад
Perfect 👍
@antonioferreira5556
@antonioferreira5556 3 года назад
É Black boa tarde comprei uma esmerilhadeira da blek Dek 4:30 e o parafuso que aperta o protetor do disco o suporte de cima a cabeça vem para e não segura o protetor não aperta tentei contato com a fábrica mandaram eu ir na assistência técnica aqui na cidade na avenida João Durval Carneiro eu fui conversei com atendente eles disseram que que tinha que resolver era a fábrica não me deu nenhuma posição fiquei no prejuízo com protetor da máquina folgado o disco fica sem a proteção porque não consigo apertar porque o parafuso é não pega aperto me ajude
@Joe-xr8fs
@Joe-xr8fs 2 года назад
Hi great video. Do you have a video were you convert the orginal charger to take the new battery.
@alforgesfloripa
@alforgesfloripa 3 года назад
18:23 SPOILERRRRR
@E-hab
@E-hab 3 года назад
I think it's for comparison.
@lenovorussik8963
@lenovorussik8963 3 года назад
Приятно смотреть на ваш профессиональный труд и красивый монтаж видео..)
Год назад
What do you do the leftover material? Such as batteries?
@emrefidan829
@emrefidan829 3 года назад
Send turkey please brother 🇹🇷🇹🇷🎌
@khimsophacarfixing
@khimsophacarfixing 3 года назад
That is a good idea to restore old things.
@hazegoodman6666
@hazegoodman6666 3 года назад
Awesome video .... would you please tell me where do you get the "brand stickers " from ???
@gear_show
@gear_show 3 года назад
I made it by myself with adobe photoshop.
@rahulpandey7817
@rahulpandey7817 3 года назад
Plz give me one screwdriver because I am electrician
@tak-ii2mf
@tak-ii2mf 3 года назад
I always look forward to your posts! 17:24 警参 → 警告 ●ご使用の前に取扱説明書を必ず「ま」くお読みください。 ↓ ●ご使用の前に取扱説明書を必ず「よ」くお読みください。 ニカド電池はリサイクルへ ↓ リチウムイオン電池はリサイクルへ (ニカド電池 = Ni-Cd, リチウムイオン電池 = Lithium-ion)
@gear_show
@gear_show 3 года назад
Okay, thank you!
@barryluo2011
@barryluo2011 3 года назад
Great video as always! I do have a question on the new labels though, do you make them on your own? or do you customize them somewhere? I noticed on the new labels it mentions "Lithium ion" and also the date you restored, probably the new voltage and current as well. Great attentions to details.
@gear_show
@gear_show 3 года назад
Thank you again! I create it by myself.
@barryluo2011
@barryluo2011 3 года назад
@@gear_show That's amazing!! Wish to see more about the labels in your future videos!
@hopeofmukil2244
@hopeofmukil2244 3 года назад
You are very super man you was so itelegent 🙂😍😍😍😍😍😍
@gear_show
@gear_show 3 года назад
Many many thanks
@amilcarmoncada1801
@amilcarmoncada1801 3 года назад
Excelente restauración de la pistola de impacto Black & Decker 14.4V, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍🤘
@gear_show
@gear_show 3 года назад
¡Muchas gracias por visitar mi canal!
@geenneppeonzin871
@geenneppeonzin871 3 года назад
Is it better and powerful then new ??
@nadirsaadabi286
@nadirsaadabi286 3 года назад
Very nice restoration as usual.. I enjoyed your video.
@gear_show
@gear_show 3 года назад
Glad you enjoyed it
@aceelectriccompany1181
@aceelectriccompany1181 3 года назад
Too many ads are going to make me unsubscribe. Don't kill the the Golden Goose with ads.
@gear_show
@gear_show 3 года назад
Oh, I'm sorry about that. RU-vidr do this for me.
@moya9450
@moya9450 3 года назад
Another amazing video of a professional. I'm so careful about those batteries specialluy when they are connected in series. That nickle which connencts two pair of battery together is sharp and can rip off the isolation shrink tube of the battery and short them out. Also when hight current pass through nickles, they became hot and again that can melt the isolation shrink tube. Maybe I'm too cautious.
@gear_show
@gear_show 3 года назад
Yes, you're right, thank you for reminding.
@moya9450
@moya9450 3 года назад
@@gear_show Thank you for your amazing videos. Most of user come here to watch because your videos are very relaxing
@ElPadre50340
@ElPadre50340 3 года назад
Bravo, belle vidéo !! Merci pour le partage.
@gear_show
@gear_show 3 года назад
De rien, merci de votre visite
@shinsheiki87
@shinsheiki87 3 года назад
Quiero y debo aprender a convertir baterias de ni.cd, ni.mh a li.ion 💪👍. Gracias por tus videos.
@agustinrodriguez3873
@agustinrodriguez3873 3 года назад
Very good job. You can also polish the plastics. I've heard acetone steam delivers good results.
@gandasturi7
@gandasturi7 3 года назад
Perfect...
@قرانالكريم-ط2غ
@قرانالكريم-ط2غ 3 года назад
Were from
@jorgehuerta9814
@jorgehuerta9814 3 года назад
Hola
@jessearrazola4283
@jessearrazola4283 3 года назад
400k subs deberías tener mucho más buen hombre, as always nice job I like so much your videos. Thanks for sharing! Best regards
@hondaxe6781
@hondaxe6781 3 года назад
Nice video sir
@AshuFM
@AshuFM 3 года назад
Very good
@msaleh323
@msaleh323 3 года назад
how or where do you get this original tools labels for brands ?
@gear_show
@gear_show 3 года назад
I made them with adobe photoshop.
@fazeeboii3450
@fazeeboii3450 3 года назад
Nice 👍🏻 Which is good bms for 775 motor?
@gear_show
@gear_show 3 года назад
Yes, It is.
@AshuFM
@AshuFM 3 года назад
Fantastic
@Duc_Giang.
@Duc_Giang. 3 года назад
how to print the stamp?
@tigerboykim8339
@tigerboykim8339 3 года назад
What is the Makita Drill used at 0:33? Please tell me the model.
@BaulMp3
@BaulMp3 2 года назад
He restored in another video, search it.
@robertobezerra8376
@robertobezerra8376 8 месяцев назад
👏👏👏👏👏👏💯💯💯💯💯👍👌🇧🇷🇧🇷
@dinadiy578
@dinadiy578 3 года назад
good
@Khoa8994
@Khoa8994 3 года назад
Where are you from?
@yumanau4024
@yumanau4024 3 года назад
弱弱地问一句:up主是中国人吗?
@juanvelasquez9114
@juanvelasquez9114 3 года назад
awesome work as always! excuse me what liquid do you use in the minute 3:06? vinegar?
@gear_show
@gear_show 3 года назад
That liquid is used gasoline. I use to clean machine parts.
@juanvelasquez9114
@juanvelasquez9114 3 года назад
@@gear_show thank u sir
@artemiosarmiento6925
@artemiosarmiento6925 3 года назад
What is the yellow liquid that you put on the gears and nuts?
@E-hab
@E-hab 3 года назад
it's dirty gasoline.
@artemiosarmiento6925
@artemiosarmiento6925 3 года назад
@@E-habdiesel gas?
@gear_show
@gear_show 3 года назад
Yes I reuse the gasoline many times.
@Denis-vk4vg
@Denis-vk4vg 3 года назад
@@artemiosarmiento6925 not diesel gas, it's too greasy. It's gasoline (or unleaded petrol if you like) which acts as a degreaser. Very handy and cheap to remove old grease and dirt on mechanical parts.
@artemiosarmiento6925
@artemiosarmiento6925 3 года назад
@@Denis-vk4vg just putting on gears and nuts in the gasoline?no other process to make it new again?
@savageodo7195
@savageodo7195 3 года назад
Do you take tools from subs and restore them ?
@gear_show
@gear_show 3 года назад
No I don't.
@jckcruz43
@jckcruz43 3 года назад
👏👏 Genial
@taunteratwill1787
@taunteratwill1787 3 года назад
It's time someone did this on RU-vid!! 😂🤣😂
@lolcec81
@lolcec81 3 года назад
Комментарий в поддержку канала и ролика, а также труда мастера отреставрировавшего этот шуруповёрт.
@plageran
@plageran 3 года назад
How did you test the motor before assembly?
@leachimusable
@leachimusable 3 года назад
I find very good that you recycle old proven. Unfortunately, we throw too much for scrap. What is that white cordless screwdriver with which you open the device? I like that.
@E-hab
@E-hab 3 года назад
he have a video about that white screw driver.
@АндрейЛевченков-р7ж
Привет Бро. А вы их продаёте или нет?
@gear_show
@gear_show 3 года назад
Привет, братан, Доставка этого инструмента потрачена очень дорого. Боюсь, я не могу вам его продать, извините.
@sddiymakeitworthit7512
@sddiymakeitworthit7512 3 года назад
Like you
@gear_show
@gear_show 3 года назад
Thank you!
@mateuswjs436
@mateuswjs436 3 года назад
Top
@RestorationVS
@RestorationVS 3 года назад
Good Restoration brother 👍❤️👍
@gear_show
@gear_show 3 года назад
Thank you! Cheers!
@DuzgunGr
@DuzgunGr 3 года назад
do you sell the drill .I can take
@gear_show
@gear_show 3 года назад
I'm sorry I can't sell them.
@DuzgunGr
@DuzgunGr 3 года назад
@@gear_show what are you doing drills :D
@BoswaidTukangkreatif1980
@BoswaidTukangkreatif1980 3 года назад
Hadir ikut nyimak
@pedropires7902
@pedropires7902 3 года назад
Where do u find the stickers???
@gear_show
@gear_show 3 года назад
I made it by myself.
@حسين-ج9ط7ي
@حسين-ج9ط7ي 3 года назад
Thanks 👍👍 عمل رائع شكرا لك اخي
@luismsanchez442
@luismsanchez442 3 года назад
Love your restorations !!!!
@gear_show
@gear_show 3 года назад
Glad you like them!
@MRTechnicalKiran
@MRTechnicalKiran 3 года назад
Super bro 😀
@gear_show
@gear_show 3 года назад
Thank you!
@kouiderz-39.
@kouiderz-39. Год назад
👍
@albertoone3663
@albertoone3663 3 года назад
👌👍
@chriscraft9681
@chriscraft9681 3 года назад
👍
@Khalid81751
@Khalid81751 3 года назад
Perfect video keep going
@gear_show
@gear_show 3 года назад
Thanks, will do!
@kahlid-ataya
@kahlid-ataya 3 года назад
0:54 what happened to your arm it looks injured 😱 and thanks for sharing this video
@gear_show
@gear_show 3 года назад
I got burned with a motorcycle exhaust when my motorcycle had a flat tire.​ Anyway thank you!
@kahlid-ataya
@kahlid-ataya 3 года назад
@@gear_show i hope you feel better soon
@patrickmorrissey2271
@patrickmorrissey2271 3 года назад
Great job on this one... I especially loved the creativity on the new battery.... Well done Sir. Near the end, I was like, what, no new Black & Decker stickers??? Ahhh, but there you were... Very nice....
@gear_show
@gear_show 3 года назад
Thank you so much! I made those stickers by myself.
@oldriver1478
@oldriver1478 3 года назад
@@gear_show Can you tell me what kind of printer and paper you use for the stickers ??
@alekpop1625
@alekpop1625 3 года назад
J also made one buttery 14.4 bms 4s 30a butt start and stop .what to do
@gear_show
@gear_show 3 года назад
You should choose real high drain current 18650 cells and use good BMS 4S40A. Than follow me in this video, it should be work. Please don't mix good and bad 18650 cells.
@Denis-vk4vg
@Denis-vk4vg 3 года назад
This probably means the BMS is cutting power to protect the battery cells from over discharging. You need to check if the 18650 cells you are using are fully charged first (not always the case with the original Ni-Cd or NiMH charger). If the cells you're using are high drain current capable : they can be powerful like 2000mAh, however if the current is only 1 or 2A, voltage will drop and the BMS will cut. You need to check the specs of your cells. If you have enough room, you may double the cells in parallel (it helps with the discharge current).
@alekpop1625
@alekpop1625 3 года назад
@@Denis-vk4vg jes this is what j heard.if weak cell cant work.j use high drain samsung cell 2000mah.with bosch gsb heavy drain motor about 250watt.and thats trouble
@alekpop1625
@alekpop1625 3 года назад
@@Denis-vk4vg 🎚🎙this is what it is.j use 30a bms.it .like only 18a.and with medim load starts to cut.cant handle even 20 amps.j will buy 40a bms.see ja
@tatianadevena5364
@tatianadevena5364 3 года назад
Nice work!!! Wonderful!!!!!
@muhendismehmet6379
@muhendismehmet6379 3 года назад
Wow you have two black decker impact driver
@gear_show
@gear_show 3 года назад
Yes, I have 12V and 14.4V impact drivers, you know my channel very well.
Далее
Rusty Impact Driver Restoration | Makita 6919D
17:43
Просмотров 276 тыс.
🎙Пою РЕТРО Песни💃
3:05:57
Просмотров 1,3 млн
Учёные из Тринидад и Тобаго
00:23
Лиса🦊 УЖЕ НА ВСЕХ ПЛОЩАДКАХ!
00:24
Rusty Impact Driver Restoration | WH12DH
19:17
Просмотров 3,9 млн
EXTREMELY Rare BMW Skillet Restoration
9:59
Просмотров 764 тыс.
Restoration of Impact Driver - Milwaukee M18-2753
17:58
Drill Restoration | Black & Decker 14.4V Upgrade
16:57
1938's Razor Blade Sharpener - Siemens - Restoration
11:44
Попробовал салат! А вы? 😋
0:23
Просмотров 4,6 млн