Тёмный

Improve your steering on the ZERO 10X (or just about any other e-scooter) 

Falcon Pev | Pab Pmd Escooter Ebike Shop Singapore
Подписаться 16 тыс.
Просмотров 23 тыс.
50% 1

Follow us on...
IG: / falconpev
FB: www. falconpev
Do you feel that your handlebar is abit too stiff? As though there are knots every time you turn. Or is it too loose and tend to cause some oversteer. Or is it too shaky which causes speed wobbles at higher speeds??
The impact of how tight, loose or well maintained your steering will define your day's ride enjoyment and ride safety. It will either make or break your mood while on your ride out with the gang.
This tutorial will show you how you are able to tighten your steering, loosen your steering or even how you are able to maintain your 'health' of steering all for the best ride comfort. This method can be used for most e-scooters with sealed bearing headsets.
For more information on the e-scooter featured, please visit www.falconpev.com.sg
#esg #bestelectricscooters #zeroscooters #zero10x #bestescooter

Авто/Мото

Опубликовано:

 

5 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 61   
@kp4643
@kp4643 3 года назад
Thank you for the video. Very helpful
@bahmanr9261
@bahmanr9261 3 года назад
Couldn’t help I noticed the 10X limited at the background at 5:40. Can’t wait 😃
@robbie1212
@robbie1212 3 года назад
Very helpful & informative
@FalconpevSg
@FalconpevSg 3 года назад
Thank you
@577buttfan
@577buttfan 2 года назад
Great video for replacing head bearings.
@FalconpevSg
@FalconpevSg 2 года назад
Thank you
@MrBThorn
@MrBThorn Год назад
Thx a milion guys!
@bshammel
@bshammel 3 года назад
THANK YOU, THANK YOU, THANK YOU. My Zero 10x came from the factory way over tighten. I could hardly even turn. Thanks to you video I was able to loosen it up a quarter turn and sooo much better. Ended up need a heat gun and monkey wrench to loosen up. One of the grub screw from the factory was put in crooked and I ended up stripping it while trying to taking it out. I was still able to get the underside bolt out though. Again THANK YOU!!
@geestang2662
@geestang2662 3 года назад
Same as my zero10x, not sure how tight it should be tho
@bshammel
@bshammel 3 года назад
@@geestang2662 I loosen mine a quarter turn. Just going to have to play around with it and see what feels right for you
@jasecee8992
@jasecee8992 3 года назад
@@geestang2662 You want to stress on it. As soon as you feel stress on it and yourself, then slacken just enough.
@jerrymurphy4608
@jerrymurphy4608 3 года назад
The greatest scuterstory
@orange42
@orange42 3 года назад
Nice one
@yco67
@yco67 3 года назад
basically rebuild the whole frontal part.. wow..
@FalconpevSg
@FalconpevSg 3 года назад
yco67 that’s what tuning is all about. You lube and tune according to your needs
@SweetEviLxo14xo
@SweetEviLxo14xo 3 года назад
Does kers issues is resolved with the new batch of the z 10x 60v. What's the value you recommend to use? Sorry to ask and thank you an advanced from France
@fenixrubiano4365
@fenixrubiano4365 3 года назад
Gracias gracias gracias
@TheRival
@TheRival 3 года назад
That's WHAY TO MUCH work!
@FalconpevSg
@FalconpevSg 3 года назад
TheRival Gaming that’s what it takes to tune. You lube and tune till you get the right setting.
@Sir_Godz
@Sir_Godz 3 года назад
just got mine yesterday and fork is way too tight
@chrislavoie2081
@chrislavoie2081 3 года назад
just got mine and it is also too tight
@GadgetInspektor
@GadgetInspektor 3 года назад
Mine too, got it Saturday
@mohammedalmusabi4248
@mohammedalmusabi4248 3 года назад
Can you pls share the two steering bearing sizes?
@lutheravery6316
@lutheravery6316 3 года назад
Hi! quick question, where can I find my serial number of mu Zero 10X scooter?
@geestang2662
@geestang2662 3 года назад
How tight does the stem should be to turn left to right?
@otyice190
@otyice190 2 года назад
Hi The 11x steering bar and arm is compatibile for 10x?
@Jefzkii
@Jefzkii 3 года назад
May i know the measurement of the bearings?
@MrFas4wd
@MrFas4wd Год назад
The bolt for the suspension, the one that needs 2 size 4s. One side of that bolt has stripped away baaad!! I’ve tried everything , every bolt extractor . Is there anything you can tell me , advise me on what to do.
@MIDAZSITH
@MIDAZSITH 2 года назад
Wish this guy was my neighbor!!
@styflymalaysia311
@styflymalaysia311 3 года назад
Please do mine... and how much?
@alexandrojuradotolomei138
@alexandrojuradotolomei138 3 года назад
A question, the bearings on the sides. How can they be removed, please?
@johndaily9869
@johndaily9869 3 года назад
Same question here, my bearing inside this bowl was damaged, I was unable to remove the damaged bearing from the bowl. Way too tight.
@mobshitallday7417
@mobshitallday7417 3 года назад
Will the rugged clamp work for the eagleone scooter..?
@577buttfan
@577buttfan 2 года назад
Yup same thing
@koreylaw
@koreylaw 3 года назад
You said in case you want to upgrade the shock. Has anyone found a shock that is the same length as the front that is a good replacement upgrade?
@FalconpevSg
@FalconpevSg 3 года назад
koreylaw we will have a 135mm hydraulic shock for the 10X soon
@dsmgx916
@dsmgx916 3 года назад
@@FalconpevSg Any update on the front shocks?
@rzkysyz
@rzkysyz 2 года назад
Sorry. Which part of the video is actually about loosening or tightening the steering? I have an Apollo Ghost. I added the metal spacer to reduce the stem wobble. But the steering just become very stiff after that.
@rzkysyz
@rzkysyz 2 года назад
Oh nevermind. Apparently I simply have to loosen the 10mm screw in the base of the stem. And that's it.
@jasecee8992
@jasecee8992 3 года назад
I got the rugged clamp, and I when I install the spacer shim, it now mis-aligns the through bolt. How did you manage to do this?
@DanceySteveYNWA
@DanceySteveYNWA 3 года назад
The bolt should go through when it's folded down
@jasecee8992
@jasecee8992 3 года назад
@@DanceySteveYNWA thanks! I'll try this
@greydog1104
@greydog1104 2 года назад
After riding in the rain a few days, one morning my steering felt ceased initially and now it just feels like more friction than normal. I'm guessing water got into the bearing. Can this be lubed without disassembly?
@FalconpevSg
@FalconpevSg 2 года назад
Yes just spray some wd40 onto the bearing area
@greydog1104
@greydog1104 2 года назад
@@FalconpevSg thanks for the answer. I might try a very fine oil like for lubricating locks. I think wd40 will dissolve any grease in the bearing. I use wd40 as a solvent for removing tar and dirty grease so its probably not great for bearing life.
@davidmichael3189
@davidmichael3189 3 года назад
Is this for the 11X too? Thanks
@FalconpevSg
@FalconpevSg 3 года назад
yes same method
@ScootLetsGo
@ScootLetsGo 3 года назад
Hey guys. We have a zero 11x. And was wondering if you are able to send me some pictures of the wiring and a diagram if you have it. This would be a massive help. We had a controller with error 10. They sent out new one and now it has error 9. Any help you provide will be great :)
@FalconpevSg
@FalconpevSg 3 года назад
Where did you get it from
@ScootLetsGo
@ScootLetsGo 3 года назад
Falcon Pev | PAB PMD E-Scooter E-Bike Shop we are in the UK and ordered from China directly. Unfortunately now they have sent us out another controller they are not being very helpful.
@FalconpevSg
@FalconpevSg 3 года назад
Scoot, Scoot, Let's Go! It’s abit unfair is it
@ScootLetsGo
@ScootLetsGo 3 года назад
Falcon Pev | PAB PMD E-Scooter E-Bike Shop the scooter has less that 20 miles on it. And already off the road. Do you have any suggestions?
@FalconpevSg
@FalconpevSg 3 года назад
Scoot, Scoot, Let's Go! Email us at sales@falconpev.com.sg
@jasecee8992
@jasecee8992 3 года назад
I need a workshop!
@FalconpevSg
@FalconpevSg 3 года назад
haha you are welcome to use ours)
@jasecee8992
@jasecee8992 3 года назад
@@FalconpevSg Hehe! Great vid! Keep up the great work,
@justinsarchive4111
@justinsarchive4111 2 года назад
Haha these scooters should never left the factory or the retailer with the steering too tight or too lose. Manufacturers and retailers should be held to a higher standard. Riders should be responsible for general maintenance like tires, brakes, etc.. not this
@FalconpevSg
@FalconpevSg 2 года назад
Totally agree, we are always looking to improve.
Далее
HOW TO: MAKE YOUR ZERO 10X WATER RESISTANT
8:31
Просмотров 46 тыс.
Zero 10x Electric Scooter HEADSET Adjustment!
14:26
Просмотров 18 тыс.
ЮТУБ БЛОКИРУЮТ?
02:04
Просмотров 637 тыс.
ZERO 10X Magura MT4 MT5 MT7 Brake Install
20:59
Просмотров 34 тыс.
Electric Scooter Accessories You Should Have
7:28
Просмотров 200 тыс.