Тёмный

IMPROVED MINI 9:1 UNUN - When ON-AIR testing gets wrong due to Geomagnetic Storm 

OM0ET
Подписаться 47 тыс.
Просмотров 19 тыс.
50% 1

I was measuring and testing my newly improved Mini 9:1 UnUn transformer for the EndFed Random Wire antenna. (www.sk-tech.sk/om0et/mini-9-1-...) In this transformer I have used much thicker wire (1mm) and 8 trifilar turns instead of 5 trifilar turns in my previous version. The SWR measurement was done with MINI 1300 Antenna Analyzer. I've used approx. 16,2m (53ft) long radiator wire and about 17m (56ft) long counterpoise wire. Radiator wire still need's to do a lenght adjustments due to very high SWR on some bands and low SWR peaks located out of the bands.I wanted to do an ON-AIR test, but radio propagations was deeply degraded by running Geomagnetic storm (my wrong timing). I found just 2-3 stations on 20m and some more strong stations on 40m. 80m was still attenuated due to early time. Unfortunately just started raining... :-) I hope for better conditions in the next time ;-) Thank you for watching this video and 73! Paul OM0ET.
------------------------------------------------------------------------------------------------------
MUSIC IN THIS VIDEO:
Track: Missing Piece - Broke in Summer [Audio Library Release]
Music provided by Audio Library PlusWatch: • Missing Piece - Broke ... Free Download / Stream: alplus.io/missing-piece
-------------------------------------------------------------------------------------------------------
#mini91UNUNEndFedAntenna #MINI1300AntennaAnalyzer #XIEGUX5105

Наука

Опубликовано:

 

1 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 34   
@acestudioscouk-Ace-G0ACE
@acestudioscouk-Ace-G0ACE 3 года назад
I really like this series of videos. They explain how and why you do things and like that contacts don't always happen, it's real life. Too many videos only show when things go right. More like this please!
@OM0ET
@OM0ET 3 года назад
Thank you for your multiple nice comments! :) Thank you for your interest an support! :) I am glad that you watched my videos. Have a nice day and 73! Paul.
@VE3FAL1Fred
@VE3FAL1Fred 3 года назад
Your not kidding the bands on Monday were absolutely awful. Even on 15 megs I heard 2 shortwave stations and that was Radio Havana Cuba and and the station down in Florida WRMI....great job and great video...Fred VE3FAL
@OM0ET
@OM0ET 3 года назад
Hey Fred! Thanks! 👋😊 Yes K-index 4 and SSN 0, I guess I've choosed bad timing 😄 Hope the propagations will improve with the new solar cycle and begin the heaven for us - QRP'rs ☺ 73! Paul.
@antoniorico7387
@antoniorico7387 3 года назад
hello Paul, you are number one . your videos are very very clear and very informative.
@OM0ET
@OM0ET 3 года назад
Thanks for the nice comment Antonio! :) 73
@RadioAdventurer
@RadioAdventurer 3 года назад
Great job and great video. Thank you. I hope to hear from you when conditions improve! 73 de 9A3GVD
@OM0ET
@OM0ET 3 года назад
Thanks! I hope so too 😉 Maybe on 80 or 40m we should 👍 73, Paul.
@o00scorpion00o
@o00scorpion00o 3 года назад
Try, EFHW 49:1, I love these antennas, I think they're much more efficient too. No need for radials and tuners on the resonant bands. Propagation is not that bad, I regularly make SSB contacts to North and South America from Ireland with the FT-891 and Chameleon MPAS 2.0 on 20 Meters in the Evenings UTC. I Enjoying making contacts too on Olivia and PSK31.
@OM0ET
@OM0ET 3 года назад
Thanks. Yes I plan to try the EFHF 49:1 too and make the video about that ;) This 3 days is minor geomagnetic storm, that's the reason why is the band so flat. Hope that it will improve soon :) 73, Paul.
@kamilsp7fll
@kamilsp7fll 3 года назад
Neat design.
@OM0ET
@OM0ET 3 года назад
Thanks! 😁
@rasputinputin8103
@rasputinputin8103 3 года назад
I cut my long wire to 42.2535 m (138ft.71/2"). That way it is resonant on 3.550 / 7.1 /14.2/ 28.4. The impedance is going to be in the range of 2,450 Ohms +/- a few ohms, so a 49:1 transformer is the ideal way to go. A T240-31 ferrite core is suitable, if you want to use 160m. Use one, two or even three toroids if you are licenced for 1.5KW or, if you are Italian, 20KW. The transformer will be quite flat (1:1.1) until 12m, then a gentle rise to 1:1.8 at 10m should be expected. You are going to need an ATU for 6m and 4m, especially, but this is expecting a lot from a tuner, so a dedicated antenna for 6m and 4m ought to be used.
@hansolo741
@hansolo741 3 года назад
I just noticed it. If you measure SWR with e.g. a Nano VNA with 1 m cable then e.g. Xiegu G90 through a 20 m cable. These results are quite varied. I suspect that the SWR measurement in Xiegu devices is quite approximate, are there any phenomena in the cable? What do you think? Regards, Marek SP2CG
@kevtheskin69
@kevtheskin69 2 года назад
Ho there, I thought that you needed to calibrate everytime you changed frequency? 73s Kev
@hansolo741
@hansolo741 3 года назад
Myslím si, že také merania SWR sú nespoľahlivé. Možno meranie pomocou merača intenzity poľa umiestneného v blízkosti alebo počúvanie blízkej WebSDR by umožnilo lepšie hodnotenie antén. Obdivujem vaše experimenty a srdečne vás pozdravujem, Paul. 73 SP2CG
@LANUSLOCKPICK
@LANUSLOCKPICK 2 года назад
hello i like this video please make a test whith an END FEED antenna in QRP mode is very good 73 from Argentina LW4DKI
@philipwells2793
@philipwells2793 3 года назад
Out of interest hat sort of charger do you use for your Xeigu?
@OM0ET
@OM0ET 3 года назад
I use modified old small lead-acid charger with 13.8V output voltage or my 13.8/30A desk DC power supply.
@philipwells2793
@philipwells2793 3 года назад
@@OM0ET Thanks
@neilgodfreybartley3143
@neilgodfreybartley3143 Год назад
❤🤛🏾👍🏾👌🏾😎
@G7VFY
@G7VFY 3 года назад
You don't have to cut the wire, you can fold it back on itself!
@ggggg4030
@ggggg4030 11 месяцев назад
Bought the mini 1300. It sucked. Got the exact same reading on every band with every antenna whether it was a HT whip or 66’ EFHW.
@OM0ET
@OM0ET 11 месяцев назад
Your analyzer must be calibrated.
@ggggg4030
@ggggg4030 11 месяцев назад
@@OM0ET how many times? More specifically, how many times following the directions to the letter? Picked up a smaller nanoVNA-works perfectly
@madcarew.3256
@madcarew.3256 3 года назад
Yes Rubbish today I was testing Home brew efhw & 49:1 but not much luck...better luck to us both in the near future ! 73
@OM0ET
@OM0ET 3 года назад
Yes, but on the other side, would be boring if the propagations was just great every day 😄 is it not? I am sure that better times are waiting for us 😉👍 73 and good luck! Paul.
@realcomsolucoes7403
@realcomsolucoes7403 3 года назад
Never tune on the occupied frequency
@kevinkc3onohelijeepworld953
@kevinkc3onohelijeepworld953 3 года назад
Bring a piece of cedar shingle n let it smolder near you, will keep those nasty little buggers away KC3ONO
@OM0ET
@OM0ET 3 года назад
Good to know Kevin ;) Thanks for advice!
@rs440olli7
@rs440olli7 3 года назад
Life is to short for QRP, particularly with rubish antennas.....
@setecastron7652
@setecastron7652 3 года назад
Variety is the spice of life. ;-)
Далее
RADIO - What a great hobby!
1:24
Просмотров 10 тыс.
Which Antenna Analyzer Should You Get?
10:39
Просмотров 21 тыс.
UNO!
00:18
Просмотров 834 тыс.
Mini UNUNs 49:1 and 9:1 (production process)
1:10:43
Просмотров 34 тыс.
This AM radio still costs thousands of dollars-why?
16:51
MINI600 Antenna Analyzer EU1KY Firmware Version 1.04
9:48
Magnetic Loop vs. EndFed antenna - RX comparison
14:48
Best Manual ATU Tuning Method.
13:28
Просмотров 136 тыс.
Random Wire Antenna TESTING (part 3)
10:14
Просмотров 80 тыс.
iPhone 16 - 20+ КРУТЫХ ИЗМЕНЕНИЙ
5:20
How to Soldering wire in Factory ?
0:10
Просмотров 8 млн