Imromptu Foundry - VCV Rack Tutorial

Подписаться 47 тыс.

Просмотров 19 тыс.

50% 1

Want to learn Modular Synthesis? have a look here - bit.ly/learnmodular
Already in its early stages, I got so much inspiration from Foundry. There are so many things one can do with it, and everything is intuitive and fun. This is indeed the mother of all sequencers...
Foundry is a 4 track sequencer, with up to 32 steps in each sequence, and with 64 sequences all in all that can repeat themselves up to 99 times. One can build whole songs and compositions with this one... It has many cool features like 7 different play modes, an extra cv output for modulating velocity, cutoff point, and even sending another line of pitch information, it has the advanced gate modes just like in all of the other Impromptu sequencers, and it's even possible to delay the different tracks and add polyrhythmic nuances to your patch. This video is a sort of an introduction to Foundry. I go through all the different features and sections, and I also show how to control it with an external controller.
Here are some updates about Foundry - • Impromptu Foundry - Up...
If you like what I do and want to support my work, consider joining my crew on Patreon - / omricohen
01:01 - Clock Inputs & CV Outputs
05:48 - Programming a Sequence
15:50 - Song Mode
24:24 - TKA Run Mode
26:41 - Sel & Copy\Paste
28:04 - Track Delay
30:24 - Using an external Controller
Here is the Impromptu collection - vcvrack.com/plugins.html#impr...
Phrase Sequencers Tutorial - • Introduction to the Ph...
Advanced Gate Modes - • Impromptu Modular's Ad...
Using the BeatStep Pro with VCV Rack - • Using Arturia's BeatSt...
Recording the Turing Machine - • Recording the Turing M...
Here you can find my music - omricohencomposer.bandcamp.com
Consider subscribing - bit.ly/2OljOPN
Big thanks to Carbonic Acid for helping me out with creating my own blank modules! - bit.ly/2y2amXe
You can get them here - bit.ly/2PNxgJx
And Big thanks to Xavier Belmont for helping me out with the various graphics - bit.ly/2ItJQL2
/ xbimages
**FOLLOW ME HERE**
Website
------------
omricohen-music.com/
Patreon
-----------
/ omricohen
Spotify
-----------
open.spotify.com/artist/7ybco...
Facebook
----------------
/ omricohenmusic
Bandcamp
----------------
omricohencomposer.bandcamp.com/
Patch Storage
---------------------
patchstorage.com/author/omri_...
Instagram
----------------
omricohenco...
Twitter
-----------
/ omricohen17
SoundCloud
------------------
/ omricohencomposer
Pinterest
--------------
/ omricohenmusic

Видеоклипы

Опубликовано:

30 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@OmriCohen-Music 5 лет назад

Here are some updates about Foundry - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ijVg73LH88U.html

@UpFunkDNB 4 года назад

honestly dont know if I would have as much fun with VCV rack without your videos, every time I want to learn a module I search the name on youtube and look for Omri - thanks buddy

@OmriCohen-Music 4 года назад

That's amazing, thank you!

@marcboule 5 лет назад

Small note to Foundry users: as of version 0.6.17, the main SEQ/SONG switch behaves like that of the PhraseSeq series of sequencers, thus there may be slight differences with what is shown in this video. The expansion panel was also updated so that in SEQ mode, we can externally control the playing of the sequences. Have fun! Thanks again Omri for this tutorial :-)

@OmriCohen-Music 5 лет назад

Hey, Marc, thank you! I will pin this comment and add it also to the description.

@AzeezAbass 5 лет назад

Best modular tutorial I've ever seen! Thank you!

@OmriCohen-Music 5 лет назад

Thanks so much!

@MattDiamondMDE 3 года назад

I'm devouring your videos man, learning heaps, thanks for all of this.

@OmriCohen-Music 3 года назад

Thanks so much!

@otepsia1697 5 лет назад

So useful, once again... Thank you very much for allowing me to understand VCV Rack better.

@OmriCohen-Music 5 лет назад

I'm happy I can help 🙂 cheers!

@BadOldBuzzard 5 лет назад

Great video! 👍 This looks like it will be super for creating actual music compositions especially chords. Thanks again!!

@OmriCohen-Music 5 лет назад

Thanks! Yes, it's perfect for chords :)

@Marcoplo23 5 лет назад

Very Nice Video as always, I will try a patch with it right away ;) ! I find it mind blowing how good FM-OP sounds with Plateau, instant ambient music !

@OmriCohen-Music 5 лет назад

Thanks! Yeah, it's a sine wave, but it sounds so good with some feedback :)

@samibefree2410 5 лет назад

This sequencer is awesome!

@OmriCohen-Music 5 лет назад

Totally!

@Hennesg 2 года назад

this seems like the absolute best sequencer in VCV, so much functionality in such a relativley small module

@OmriCohen-Music 2 года назад

Yeah, all of the Impromptu collection is amazing

@omarbrown2696 4 года назад

Proper. I now understand How the tie and slide works.

@yosotattoo 5 лет назад

Great Channel! Thank you!

@OmriCohen-Music 5 лет назад

I'm glad you enjoyed it :) Thanks!

@Steve.Benedict 4 года назад

I have tried to use Foundry and the Phrase sequencers here and there but wasn't quite getting everything. This helped a lot and I have a real good understanding now. What a great sequencer, it does so much. Thanks for the great tutorial, I will be coming back to this one for reference.

@OmriCohen-Music 4 года назад

Oh wow, yes, the Impromptu sequencers are beautifully deep and very practical. I'm happy I could help :)

@walrtbstudios5430 3 года назад

Very useful indeed- even though applying this to exactly the same module in miRack is a rather frustrating experience owing to the lack of control interface options. Basically there’s the pencil/finger, and... er, that’s it. Still, I’ve got a cool 16-step sequence out of it after just ten minutes of this tutorial, so thank you! And as that’s the second time I’ve found a tutorial of yours useful, that’s a sub...

@OmriCohen-Music 3 года назад

Hey, thanks! I'm really happy I could help :)

@edwardnixon1782 5 лет назад

There's something missing in the procedure for connecting the BSPro for me. I got wired up with the CV, Gate, Vel & CV2 to track A and got a sequence written to Foundry from my Seq1 keypad. But when I run the BSPro only the first 16 step of the sequence seem to play out, i.e., the 16 steps of the default length sequence on BSPro. The last 16 steps light up in Foundry, but those notes are lost. Is it possible somehow BSPro overwrote the second 16 with its first 16 on the first run attempt? (Also a nit: I substituted an FM-OP for the Cosmic because I couldn't figure out how you'd wired it up, both to Foundry and... beyond. Not a well documented Oscillator in my experience.) Thanks for any tips.

@edwardnixon1782 5 лет назад

I think it's working for me now. There are a lot of moving parts and maybe they can get discombobulated a bit, especially if there's a bit of learning curve churn.

@OmriCohen-Music 5 лет назад

Hi Edward, sorry for not answering sooner, but I'm still recovering from a nasty flu... You have to make sure that you've got no sequence programmed on the BSPro, otherwise, it will overwrite the notes on Foundry. If you don't want to delete the sequence, then before hitting play, remove the cable from the WRITE function, so the sequence on Foundry will not be overwritten. (be aware that maybe you have no sequence programmed on the BSPro, but the random function is active, so it will still output values) About Cosmic, it's an oscillator worth learning and I go through it at the beginning of the Foundry live stream I made - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-0_xZsuPEY68.html I hope it helps, please let me know! Cheers!

@paulpiko 5 лет назад

Thanks for the tutorial Omri. Is it possible to set the gate length via CV or set it from the external controller?

@OmriCohen-Music 5 лет назад

Thanks, Paul! The gate length depends on what you feed in the clock input so if you're using an external controller, you'll have to make the changes there.

@paulpiko 5 лет назад

@@OmriCohen-Music Hope you are getting better. So to write a step into Foudnry that has the gate off (in other words, don't play anything on that step), you would need no signal to go into the clock input? Does that make sense? I don't know if I'm explaining it very well.

@OmriCohen-Music 5 лет назад

ok, now I understand. You can add a gate off trigger for each step by using the gate input in the extension. You can also do it manually of course, by clicking the gate button. Be sure to check out the tie function if you're looking for adding sustained notes.

@TheKikitito 5 лет назад

Hey Omri, super nice video! But at 21:58, after step 4 in my song or sequence, the yellow dot goes back to the beginning, but there is a green one that will do the whole 32 steps, thus messing the chords...The B and C tracks, after 4 steps (which is the length of sequence 1) become C and are stuck in that note for the rest of the steps. When it goes back to the beginning it works normally, but again only for 4 steps...

@TheKikitito 5 лет назад

OK, got it! Answering myself. I needed to set the sequence limit of 4 steps for each track!

@OmriCohen-Music 5 лет назад

@@TheKikitito Hi! Yes, you'll have to set the length for all tracks, but don't forget to use the ALL button, it will make your life easier... :) Cheers!

@TheKikitito 5 лет назад

@@OmriCohen-Music Ah yes! I forgot about that, thanks!

@Kevinschart 5 лет назад

Track b will only play different sequences of a phrase if i set track b to TKA run mode. I can't run independent phrases on track b. am i missing something?

@OmriCohen-Music 5 лет назад

I'm not so sure how you have it set up, can you send me the patch or an example?

@Kevinschart 5 лет назад

@Omri Cohen thanks for offering to help, but I don't know how to contact you

@OmriCohen-Music 5 лет назад

You can find my e mail address here - ru-vid.com/show-UCuWKHSHTHMV_nVSeNH4gYAgabout?view_as=subscriber

@oldbatwit5102 4 года назад

I could not get this set-up to work. I had a continuous tone, through both channels, behind the melody.

@OmriCohen-Music 4 года назад

Oh ok. Can you send me the patch or a screen shot of how you have things set up?

@proxxyBean 4 года назад

Can you combine the gate probability with the tied note function, so that when a note isn't played the prior note gets tied?

@OmriCohen-Music 4 года назад

I think it doesn't work for now but I will check it out.

@OmriCohen-Music 4 года назад

Hi again! This feature will be available in the next update. Thanks again.

@marcboule 4 года назад

This is now fixed in version 1.1.3 :-)

@TyQuinn 5 лет назад

Does anyone know how to submit a feature request? For the select mode, rather than having "4, 8 and end" I'd love it if the process was: 1) Press select, 2) Select the first note in the selection, 3) Select the last note in the selection. This would remove the arbitrary 4, 8, or end selection lengths, and requires the same number of mouse clicks

@OmriCohen-Music 5 лет назад

Hi Ty! Feel free to write it here - github.com/MarcBoule/ImpromptuModular/issues :)

@marcboule 5 лет назад

Interesting... just opened the feature request myself with this, thanks!

@TyQuinn 5 лет назад

@@marcboule Thanks Marc! Love your work!

@marcboule 5 лет назад

@@TyQuinn I really like the idea, the only thing is that the switch is also used to determine the length of copy-pasting for portions of the song, which does not reside in the 32 steps at the top right. So do you think it would be ok to remove the switch any ways, and make it such that to determine the length of the segment of the song we want to copy, we do it like this: 1) move the start phrase, 2) press copy, the song phrase display would now flash continually, 3) we move to the end phrase with the knob, 4) hit copy again, and this has now copied the part of the song we want. Pasting is not a problem, it just pastes what is stored. Seem reasonable? When we know what the flashing would mean, it would be intuitive, but for someone that doesn't know what the flashing means, it might make copy-pasting song content confusing.

@TyQuinn 5 лет назад

@@marcboule I think that sounds really sensible. But I guess it would definitely require people to read the manual, but it should seem really logical/intuitive after that

@Ghalebor 5 лет назад

I have same problem. Maybe I missed something in this video. I try step by step watching and make the same in my version. First step goes ok next step it is totaly mess. :(

@marcboule 5 лет назад

I didn't get a chance to watch the video yet, but perhaps it may be because the version in the plugin manager has not been updated yet and Omri has a newer Foundry. If you like, you can download the latest build here: github.com/MarcBoule/ImpromptuModular/releases/tag/0.6.13b

@Ghalebor 5 лет назад

@@marcboule I have a update version. But im think i missed something watching this video. I try to recreated this part of tutorial two times with the same resoult. :(

@marcboule 5 лет назад

@@Ghalebor I think it's because Omri had previously set up the sequences in each track (where the lengths of each track were set to 4), but it didn't appear in the video. If you see light green run heads moving past step 4, it could be that you didn't set the length to 4 for all tracks. If you click ALL, and then set length to 4, this will be done across all tracks, and then it should play properly.

@OmriCohen-Music 5 лет назад

Hi! Can you describe the problem? To which part of the video you refer to?

@realcodechris 5 лет назад

@@OmriCohen-Music if you look at your sequence it only lights po the first 8 lights, but ours it runs through all the lights and I cannot find a way to replicate what you have done. It's as if you did something earlier and did not show it in the video

@cardboardmusic 3 года назад

I have to say I can't get anything different from the different gate modes, they always stay the same (whatever).

@OmriCohen-Music 3 года назад

How do you have it set up?

@cardboardmusic 3 года назад

@@OmriCohen-Music Sorry for the late reply. I'm not sure what you mean by how do I have it set up? I have to admit that it (the patch) moved on a bit since I posted the question. I can send you the patch via twitter DM if that's useful - with some added comments? I should also have a look at your complementary video tutorial on gates which might explain more.

@OmriCohen-Music 3 года назад

@@cardboardmusic yeah, feel free to send me the patch and I'll have a look 🙂

@cardboardmusic 3 года назад

@@OmriCohen-Music Okay Omri, I sorted it out by making a really simple patch. Actually, it gave me an idea (to try later) that if you used a noise osc, you could make a very interesting drum machine with those variable gates. You'd get a nice triplet feel for high hats, or snares (as an example). Anyhow, thanks again - oh, by the way, I still have to get to the end of this video. I'm always having so much fun I often get sidetracked building my own patch after watching just a few minutes of some of your example.

@MrGloupiboulga 5 лет назад

beatstep pro is verry good for live :D ,and coupled with foundry is verry good for vcv rack, this just insane the possibility offer :o

@OmriCohen-Music 5 лет назад

Oh yes! It's very inspiring.

@richardmiltongrahn4602 5 лет назад

All I get from this sequencer is clicks. Followed the tutorial until I got tired of the clicking. I'm obviously missing something. :(

@OmriCohen-Music 5 лет назад

That's weird... Can you send me a screen shot of your patch with the clicks?

@richardmiltongrahn4602 5 лет назад

My apologies, Omri. After sleeping on the problem, I realized that I hadn't set the block size in my audio interface. On my system, when there are fewer blocks, I get clicking and hickups. Changed the block size and it's working fine. Thanks for responding.

@OmriCohen-Music 5 лет назад

@@richardmiltongrahn4602 Oh ok, nice! Have fun then :)