Indestructible Drone // Most Drone Crashes // Air Mode On?

Подписаться 59 тыс.

Просмотров 26 тыс.

50% 1

Sometimes we have to test how indestructible a drone is. Neighbors had a good laugh.
FoxWhoop 25 Available from the resellers below.
Foxeer - bit.ly/3o6i1hB
Banggood - bit.ly/3PJnDua
DefinanceRC - bit.ly/3PofYSb
AliExpress - bit.ly/3cxfhaI
Frame
RaceDayQuads - bit.ly/3oh3uzD
NewBeeDrone - bit.ly/3RFmipN
PyroDrone - bit.ly/3Okpx39
Foxeer - bit.ly/3OjNxn8
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use RadioMaster Zorro bit.ly/3JUiNrr
Zorro @ Amazon amzn.to/3uDFt8J
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► RotorRiot - bit.ly/3N40Ebp
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

Наука

Опубликовано:

19 июл 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 340

@NickBurnsFPV Год назад

25 recorded crashes make it indestructible? Sure makes it very hardy. 🤣 Seems the one item these current line of cinewhoops is missing is camera protection.📸 Foxeer - bit.ly/3o6i1hB Banggood - bit.ly/3PJnDua DefinanceRC - bit.ly/3PofYSb AliExpress - bit.ly/3cxfhaI Frame RaceDayQuads - bit.ly/3oh3uzD NewBeeDrone - bit.ly/3RFmipN PyroDrone - bit.ly/3Okpx39 Foxeer - bit.ly/3OjNxn8

@shortclipsvictoria789 Год назад

Just to warn you, there is an imposter account with your name and profile images telling me I won prizes and refers me to a telegram account.

@terrylnwoods Год назад

Hi Nick, great video as always! In previous videos you have mentioned loss of control due to "yaw wash". Do you think that you may have been experiencing 'Vortex Ring State' or VRS? (a dangerous condition experienced by helicopters when descending with very low airspeed): ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LCret4rv0HE.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q3jhYhBn_NQ.html

@NickBurnsFPV Год назад

@@shortclipsvictoria789 yes this is common on youtube. Its pretty obvious the account is a fake, as its name is far from the channel name.

@NickBurnsFPV Год назад

@@terrylnwoods No I don't believe so as that is more typical when descending straight down flat, rather than nose down in a dive. Also the flight controllers used in quad like in the linked video have very limited abilities and brushed geared motors which struggle to control the prop. Those setups aren't designed around fast prop speed changes.

@AfafPrinceOSH 5 месяцев назад

What's the thickness of the frame@@NickBurnsFPV

@brianfreland9065 11 месяцев назад

😂 thats the best durability test ive ever witnessed 😂😂😂

@kaleoariola Год назад

You didn't just test the prop guards but the other components as well. For all of them to sustain all of that shock and keep working is amazing! Sold!

@tonymorgan328 Год назад

Great review and flight again Nick. I enjoy your comments about your house, construction, and generally everything you talk about. Keep up the good work and I'll keep watching.

@jumpstartfpv Год назад

Yes I do like the small snippets of your life that you share with us. Adds a personal touch and feels really good to know all the progress that's happening. 🙂

@GrimSpeedFPV Год назад

I like seeing how your backyard is coming along. Kinda cool stuff!

@anujchandkapoor Год назад

Nick I appreciate all your videos and enjoy watching your video including how the pool came along. Please don't change your format its absolutely perfect. Frankly I would love to see a complete video of your house and places you like to fly. Also do a full video on your experience of building a backyard pool. I live in Singapore and will never have a pool or a house watching your makes me feel very happy.

@originafreerangechicken Год назад

Great job, Nick. Tough little quad and I quite enjoyed your dogged determination to test the “unbreakable”claim. As for the content within your content, you could record yourself digging a hole in the sand at high tide and I’d still watch till the end. Thanks for sharing excerpts from your life and backyard projects. Hope to see the neighbor and his train one day. Much like FPV, It takes a special type of crazy person to excel at building / operating / maintaining functional model trains and scale scenery.

@erikvf7 Год назад

Great review Nick! Looks like a really nice cinewhoop that can handle some good crashes! Let me know if you are able to get rid of that low throttle wobble, because I have a quad with exact same behavior and I couldn't fix it. I tried different tunes and versions of BF, and same behavior. I'll try increasing the idle rpm as well..

@rckyfpv Год назад

Your reviews are so relaxing!

@paulgeorge1069 Год назад

We love your content nick. The backyard is coming a long looks great. Not much air mode there. Great video i think I'm gonna get one.

@jonathangilpin193 Год назад

Love hearing your stories adds a personal touch other drone channels do not do! And I personal would love to see your neighbors trains ! Also loven the thought of a Drone that can take a bit of a beating,this will be my next buy!

@415bryant Год назад

I like the backyard and the updates on it. Looking good!

@NickBurnsFPV Год назад

Thank you. Looking forward to spending more time out there

@DrFrantic77 Год назад

Nice review mate, thanks for sharing

@TouYubeTom Год назад

thumbs up! impatiently waiting for my frame kit..

@AKtoTok Год назад

Impressive!! Awesome review as always 🙌

@Adam_Carbone Год назад

I love the opening shots of you just full speed crashing into a brick chimney face lol. Great testimony to the durability of the prop guards! I think I speak for many people when I say that I like hearing about some of your life stuff, nice little audience to creator conversation! There are some occasional stutters and flutters but besides that, it seems to fly pretty well! Thanks for the spec's breakdown and overall review!

@NickBurnsFPV Год назад

I don't mind sharing and I like to hear what people have to say, and with so much flight footage it breaks up the straight quad only talk.

@CoppertopFPV Год назад

Tuned up it flies surprisingly well for a whoop. A lot of fun

@velkrofpv6654 Год назад

quad looks great very durable . yard looks great Nick. Great review as always!

@KcCake Год назад

Noooo the wall! You might hurt it!

@NickBurnsFPV Год назад

Ha!

@MrSabram07 Год назад

All those flights into the brick wall, thank you you made me laugh

@Prop-A Год назад

This is why I keep being subscribed. Hard to watch all the abuse though. Thank you again for a great video. If the propguard has fc mounting holes it could become a whoop frame 😉 Gotta love the neighbours! Huge shoutout to them ❤ a cinematic flight over the model train nextdoor would be so cool 🤞

@NickBurnsFPV Год назад

We need the frame for body component mounting. Maybe we could diy a way to make it a whoop

@shogunemperor Год назад

WHOA! That! Is impressive! Awesome video Nick!

@NickBurnsFPV Год назад

Thank you sir. Now somone needs to make a hit song from the sounds of drone crashes :)

@shogunemperor Год назад

@@NickBurnsFPV HHAHAHAHAH that'd be damn brilliant!!!!!! Thanks always for the awesome videos man. And YOU have an awesome day good sir!

@dondupuis5524 Год назад

Really enjoyed video. Great job.

@NickBurnsFPV Год назад

Thank you

@joshrayner7167 Год назад

You and your neighbour seem like great pals

@duggerinc Год назад

Looking good Mr Burns! Great vid, I almost want one. 😉

@dondupuis5524 Год назад

Its good you talk about what going on in your yard, clear your not just setting around flying drone, we all wish we could just do that, but not realistic. I alway look to see what has change in you yard and alway looking for new ideas for my yard!

@NuarStanger Год назад

All those crashes cracked me up! Lol Unbreakable huh? Ohhh yeah? Lmao

@grumpyjohntxredneckrc6346 Год назад

NICE Nick, I Needs Me One Of Them Puppies Since I Have Problems Running Into Everything! Thanks 🤪🤣😁😎

@electroddxful Год назад

Hey Nick great review as always👍🙏👍🙏

@TurboGreen Год назад

man talk about torture testing it hahah! that was epic!

@CDRaff Год назад

I have been watching several of your Cinewhoop videos trying to decide how I want to spend my money and watching the Cinelog 25 right before this video I have to say: bravo Nick! You did a lot of hard work and it shows.

@slowentropy4531 Год назад

Such a good review mate, looking really well. All the best!!

@NickBurnsFPV Год назад

Thank you. Still doing the 1 meal a day, with potentially a snack in the afternoon. It suits me and allows for more time doing other things I like to do...like more flying. :)

@slowentropy4531 Год назад

@@NickBurnsFPV same diet as me mate :), though mine is so I can use spare money for drone parts haha. Well done mate you've done amazing with setting a goal and kicking it!!

@iknomorethanu Год назад

looking healthy Nick! great work

@NickBurnsFPV Год назад

Thank you

@winder6 Год назад

Great review I always injoy watching you rip up the sky..

@NickBurnsFPV Год назад

Thank you

@TK-fp5fp Год назад

Great review, dam that thing is almost indestructible. It would make a first time choice for beginner pilots. 👍🇨🇦

@jdnic1 Год назад

Lol! Love the neighbors's comments

@NickBurnsFPV Год назад

They are nice and fun people

@acidriott Год назад

Great review!

@CarlPaulsen Год назад

I'm almost enjoying the home improvement aspects of your recent videos as much as the drone content 🤣

@djilly75 Год назад

Soooooo fun!!!!

@Mxoderberg Год назад

2 first minutes was hilarious! Laughed out loud seeing that montage😂 First smacks was kinda hesitant but then it got intense🤣👍🏻

@NickBurnsFPV Год назад

Yes. Start slowly and ramp up incrementally. “Soft” crashes first then give it more and more 🤣

@samrichard4156 Год назад

hey Nick... thanks for your review ... always enjoy watching them.. keep it up mate ^^ about the low idle wobble .. i build mine up with a Fettec 15a AIO and 1204 motors (left overs from a other one xd ) and i don't get them... but i also got a ton of filtering in it (Adaptive and Notch filters) so i guess its maybe a filter issue and or frame resonance... but i guess its both ... since i also get jello in my HD footage with ah H6 Naked, not much but to much compared to the Cinelog25 ^^

@jhughes2286 Год назад

"You're in control of what you see" Great. We love to hear about the little bits of your life you like to include! Did the quad come with a custom pid tune or defaults? Foxeer is new to the BNF game, I believe they only have one other offering, a 5 inch racer, the Caesar, it only had a default tune and didn't fly well at all, oscillations in the motors and they had a trilling sound when you hit the throttle. I had one of the first blind and flies before they even had boxes for them they just sent it to me in a blank cardboard box. You said you tried adjusting the idle speed, was there an improvement? Did it get to the point where it was too floaty feeling? I really like this quad but that flutter scares me. I wonder what the blackbox looks like. Amazing video as always Nick! Don't worry about the naysayers, share whatever you want to share, the NB squad will eat it up and watch till the end !

@NickBurnsFPV Год назад

I do like to share bits of things that are running through my mind while we are watching flights. For me keeps it from being such a dry "all about the quad" video. The quad did come with a custom pid tune. I turned up idle to 7, didn't notice much change if any. I also enabled digital idle and set that to 3000, or the recommended value then increased that some, again not much difference if any. I didn't get to the point it was feeling floaty. maybe needed to keep increasing idle values up.

@ManacoreMusic Год назад

I am ready to see them diving 🍿😄

@kaelfpv7875 Год назад

Thanks for the info. sounds like my type 👍

@jackhiggins574 Год назад

great review

@sixtofive Год назад

Ouch! You're not holding back... 😂

@NickBurnsFPV Год назад

I do wish there was a touch more space for more speed. As I got into the crashing I kept trying to go faster incrementally

@jacobosannicolas3884 Год назад

Hi Nick , always a pleasure. What do you think between this and the Protek 25 having the props facing up? Was it durable enough the iflight?.

@NickBurnsFPV Год назад

I don’t expect the propel to be able to take that sort of abuse. Nor does it have a frame warranty at all. For flat smooth flight I felt the foxwhoop was slight more stable and efficient

@georgeaura Год назад

That's nuts

@NickBurnsFPV Год назад

lol

@krushpl Год назад

I got my frame with tpu camera mount and now i'm waiting for molded mount from foxeer.

@johncarold Год назад

Hi Nick Great video and review of the unbreakable Foxeer foxwhoop 25, I can't wait until I get to try to break it. As I have mentioned that HGLRC Racewhoop you had ran into a tree over and over for two days and I purchased it, but mine lasted one day before I started breaking the whoops. I have a fun place I like to fly but it eats quads up. Yeah your backyard is looking great and I can't wait for the opening pool party. I'm wondering how many hits will it take to go through the cover ? The only thing I don't like about a inverted motor frame is that it doesn't like taking off on the grass. Other than that I think it would be a nice quad to fly. Thanks again for the video and information.

@NickBurnsFPV Год назад

The cover is supposed to withstand a car. Not testing that 🤣

@shakeymikesadventures6793 Год назад

I just ordered yesterday 2 of these frames for a friend to replace his two gt110 frames.

@ShermanKenB Год назад

That might need to make the list at the top for best beginner quad! Although based on experience all the energy that doesn't break the prop gaurd just might transfer over to one of the arms and break it first.

@NickBurnsFPV Год назад

It might, hopefully the 3mm T700 carbon can handle it for a long time coming

@cmaccowan76 Год назад

Nice review. Couldn't help but chuckle with the chimney test. New pool, cool. Now you can do some Swellpro Splash 4 vids if they send them to you.

@NickBurnsFPV Год назад

They did contact me a while back. Wanted me to pay 70% to review. Declined 🤣

@DanishStallion Год назад

ill have to try some dives. i have not paid attention to it, i dont recall it happening to me, since i built and did a review video just showing how it can really freestyle really well! trippy spins, mattys it does it all, but ill have to see how my dives are, i can let you know and share my tune same size/kv dji, my tune is in my community tab

@MCsCreations Год назад

Fantastic flying and review, Nick! 😃 Pretty impressive little quad! It remembers me of the ET series from KingKong/LDARC! Someone should make frames like those! Stay safe there with your family! 🖖😊

@NickBurnsFPV Год назад

That is what many veterans are recalling as well. We did have a diatone 2 inch with an “indestructible” frame prop protection. But I broke that one 🤣

@MCsCreations Год назад

@@NickBurnsFPV I really miss that series... And the ET Max, which was a 4", would be fantastic! 😂

@wingsounds13 Год назад

The ET-125 was one of my first quads, third I think after a whoop and an E-Flite thing that I only put a few packs through. I eventually beat the crap out of it and have never completed the rebuild even though I look at it occasionally.

@MCsCreations Год назад

@@wingsounds13 The issue of those models is that they used boards in different sizes from the standard 25x25mm... So it's pretty difficult to rebuild them without an identical board. 😕

@NickBurnsFPV Год назад

@@MCsCreations The kingkong/ldarc seems to have left the market or slid into a different market.

@gmivisualsjason3729 Год назад

Another excellent video. Really enjoy your narrative and very interested in what's happening in your life! #Not a stalker! 🤣😂🤣😂

@NickBurnsFPV Год назад

Lol #not a stalker 🤣🚨😜

@gmivisualsjason3729 Год назад

@@NickBurnsFPV 🤣😂😂 I'm in the UK anyway...... your safe! Couldn't afford the fuel and certainly not a good swimmer!!! 😂🤣😂

@videojockeysword Год назад

Dude...you are in the right place and time with these "mini-quads"!.

@NickBurnsFPV Год назад

mini/micros are pretty much all I have flown for about 7 years :)

@videojockeysword Год назад

@@NickBurnsFPV I had a mentor who has TWO "Oscars" for his "gyro-stablized helicopters"; (he used to "film", now he "scans") but I somehow missed the "quadcopter movement", so gonna be watching all YOUR videos, past and future. BTW: Where do all the various parts come from? I do 3D photography so I need to learn about the POV transmission systems as well. (Ever seen the movie "Runaway" with Tom Sellic and Gene Simons?)

@NickBurnsFPV Год назад

@@videojockeysword I do remember the 80s movie Runaway. I bet I have watched that a few times as my recollection is that was one of the first movies I recall where there were "bad robots". The parts come from a number of different sources. Drone companies now send these "samples", and others send pre production units to get some feedback on. Otherwise I buy them from FPV shops here in the US. Racedayquads.com, getfpv.com, pyrodrone.com etc, I also get stuff from china via aliexpress.com and banggood.com

@c_labb9247 Год назад

That poor wall! 🤣

@c_labb9247 Год назад

My kit did not include the tpu camera mounts. I get a little bit of jello in video feed, digital. Have you tried both options? Did you notice any difference? Thanks 🤙

@NickBurnsFPV Год назад

I started with the tpu mount. I found the molded plastic to have less jitter. The first set of props were also out of balance so they sent more

@Shauny_D Год назад

Wonder if you swapped to props out if you'd get a bit better performance on the dives and the shaky forward flight.

@z506fpv5 Год назад

I was waiting for your review to make the purchase decision. I’ll buy the HDZero version, thanks for the info

@andreaspap Год назад

i admire your persistence to test the frame. at least 30 times you bent over. poor your back . as always the best review

@NickBurnsFPV Год назад

Thank you. Back held up pretty good, I was happy with that as well

@dennisdavila1045 Год назад

Really appreciated the information that you share, thank you. I do have a question, I'm still practicing on a simulator and wanted to know from your experience if this drone would be good for a beginner that has the DJI goggles and a Radiomaster Zorro w/Crossfire controller or is there something else that you would recommend? 2nd question, on the link page for the Foxeer it's given you the option to choose Polarization: RHCP or LHCP, sorry but I don't know which to choose if I was going to go with this drone. Thank you again for any help.

@NickBurnsFPV Год назад

There are so many quads that can be good or solid first quad, I would put this in that category. I suspect if the product page is showing antenna polarization its the analog version. I think you want to be sure your selecting the dji/vista/link version and normally those don't come with a polarization option as the airunit/vista/link come standard lhcp.

@dennisdavila1045 Год назад

@@NickBurnsFPV Thank you for getting back to me, greatly appreciate your help.

@Hellmuthsilva Год назад

Very cool, what goggles are you flying here with? What controller you use?

@NickBurnsFPV Год назад

This has the caddx vista so I used the black dji v1 goggles

@jaechoe Год назад

Ouch, I feel bad for the battery, lol. you can see the battery flopping around and think even some complete ejection ( plug even gets disconnected. ) Thank you for the super entertaining indestructible test!!!! :)

@NickBurnsFPV Год назад

Yes the strap wore down and started giving way more and more

@vassilis331 Год назад

Hello Nick! How you compare it with the Cinelog25? Obviously it solves the problem with brittle prop guards but how it compares in flying? Thanks.

@NickBurnsFPV Год назад

It flies heavier, as it is, but overall it handles pretty well but I prefer the cinebot30.

@flyingdutchmanfpv Год назад

Your neighbour should set up a train channel 😉 Love the skill and attention to detail it takes to build such a lay out. Most have some funny hidden details, be sure to ask him about those.

@NickBurnsFPV Год назад

I would encourage him to when he is ready. Maybe a retirement hobby for him to start up.

@2r2 Год назад

Seen the frame and I was wandering if the prop guard part can be used as a standalone whoop like frame?

@NickBurnsFPV Год назад

I haven’t tried it. Might take a bit of diy and very light building, as the carbon provides arm stiffness

@edgardoemralino1136 Год назад

Hey NIck, will the propguard of this drone going to fit into the CINELOG 25? They look very similar. Thanks.

@NickBurnsFPV Год назад

Unfortunately I don't know. Foxeer wanted this one back after all my crashing.

@apachesmokemachining6487 Год назад

I could see the chimney move 🤣

@NickBurnsFPV Год назад

Ha. I had four cameras out recording. The one sitting on that pipe might have taken a hit. The angle on that one didn’t capture impacts, all throw away footage 🤦‍♂️

@apachesmokemachining6487 Год назад

@@NickBurnsFPV to bad you had lost a lot of footage. Still it was a great video to watch as always.

@soursham Год назад

So true about the shadow of the drone. So dope. I thought I was a weirdo 😂

@NickBurnsFPV Год назад

It seems a good many of us enjoy that visual

@MichaelDFPV Год назад

I think I would like one of these. Need to check for reviews to compare it to the Cinelog25. The home project is coming along nicely and is going to look amazing when complete.

@NickBurnsFPV Год назад

doesn't fly as well as the cinelog25, but the prop protection is much more durable.

@AverageFPV Год назад

I’m really enjoying my foxwhoop, and was hoping you would too 😁 Also a nice freestyle whoop, especially with a lighter battery (I’m using 450s).

@vitekprchal2886 Год назад

Did you have a chance to compare it to the other cine whoops? Especially those made by GEPRC? I'm wondering which one is the better buy... :)

@tk-maker Год назад

Just subscribed, i love drone torture

@NickBurnsFPV Год назад

Thank you. If they say its unbreakable or super durable I give it a testing :)

@tk-maker Год назад

@@NickBurnsFPV Sorry, it been 8 months. I used to fly mobula7, 2.5" 3" and 5" fpv drone and recently built my first cinewhoop style (betafpv 95x v3 frame), and the high-pitched noise really freaked me out. Tested with many props and PID tune, still very loud. Is that all cinewhoop type of drone are overly loud ? any good 2.5 inch silent whoop frame?

@NickBurnsFPV Год назад

@@tk-maker yea, they are all pretty loud. None are anywhere near silent unfortunately.

@phiveone Год назад

Nick so mean to cute little quad!

@NickBurnsFPV Год назад

Lol. Tough love

@thorsten7868 Год назад

Already ordered one week ago. Waited for about 2 weeks for a Nick review. Didn't want to wait any longer...

@thorsten7868 Год назад

Ordered Vista version from Banggood. Still not shipped since one week.

@NickBurnsFPV Год назад

No worries. Hopefully you found the video useful to confirm the choose to buy

@thorsten7868 Год назад

Of course!!! Always looking forward to your videos

@vladimircerovic Год назад

Uh footage at 5 mins is full of jello and twitches. I am exploring 2.5 inch optionsm since I want to build small machine that will carry gopro bones, but I need it for commercial shooting, so I need pretty much perfect build... Thanks for the video Nick, hope you got some suggestions for this summer, regarding 2.5 inch build.

@jebrc Год назад

It has to be a good product. For any company to lay a claim like that (unbreakable) they dang well know the fpv community it gonna but that to the test. Thanks for the insight Nick. I need this maybe i can stay in the air lol.

@GoatZilla Год назад

Yeah it's got electrolytes.

@TheWesNile Год назад

Nice

@greydoesmatter Год назад

I know this poast is older and you may never see this but what was your binding procedure for the Vista? Did you have to disassemble for access to the Vista? I'm kind of intimidated by how compact it is.

@NickBurnsFPV Год назад

Unfortunately I don't recall.

@yohanzo Год назад

I got one 🤪 thanks!

@sten6537 10 месяцев назад

Do you think I can fit the Avatar V2 vtx in there? (33x33x10,5mm)

@NickBurnsFPV 10 месяцев назад

I don't have this quad anymore. I doubt it would fit an O3 as it came out before the O3

@vallidrec Год назад

Holy EFF! Take my money!!

@GoatZilla Год назад

It's really hard to see which mount patterns this frame supports. You can fit stuff in there somehow, but some of it is attached to the carbon upper, some of it is attached to the plastic ducts, some of it might be attached to the carbon bottom. And the manufacturer's product page is characteristically ... light on details. One of the bigger issues is I fly with a Diamond VTX. Even if I could bury the VTX in the internal space (big if), the ducts will block the SD card and button access, if they don't already crowd the VTX in the first place.

@NickBurnsFPV Год назад

The AIO/FC is attached to the carbon. The vista is mounted to the lower carbon plate then secured to the plastic ducts. If the diamond is secure to the AIO and the sd slot is positioned to the right or left there is a gap between the upper carbon frame and the duct framing which could allow access to the sd card slot.

@mikebergman1817 Год назад

Nick! You are looking buff!!

@NickBurnsFPV Год назад

Thank you. I suspect we have some perfect lighting doing some magic too 😁🤷🏻‍♂️

@RandomMiscShit Год назад

I want a playground quad… I am tossing between this and the Flywoo hexcopter.. I’m leaning tword the hex, just cause it looks cool

@NickBurnsFPV Год назад

Hexes are unique.

@SunriseWaterMedia Год назад

0:50 I started laughing at this point. 🤣

@NickBurnsFPV Год назад

It is pretty fun to drive straight at that brick wall 😂

@SmallScaleSteam Год назад

Hi. Is there anyway that I could get hold of your Betaflight "Diff" file for this quad ? I have just purchased one (Analog video with the R-XSR receiver option) and the factory loaded Betaflight settings are totally wrong; even the UART setting for the supplied receiver was incorrectly allocated so nothing worked. Although I now have Betaflight showing "movement" on the Receiver page (I had to select UART 4 to match where the Rx SBUS wire was connected by the factory to flight control board pin "Rx4") the quad is still "dead" so I assume that other settings may also be incorrect.

@NickBurnsFPV Год назад

Sorry. I didn't take a cli dump before I shipped it off. I suggest contact foxeer support, they should have the cli. I see they don't post them on their website so we have to email them

@jtrav1204 Год назад

Oh man...damn, yrah after some point i just started laughing hysterically as the drone got smashed again and again and again

@NickBurnsFPV Год назад

Yea it worth a good laugh at least 🤣

@billmcdonald4335 Год назад

Gettin' flashbacks of that time in 2018 when you tried choppin' down one of your big ol' trees with an LDARC ET100. . .

@NickBurnsFPV Год назад

Lol that and the hglrc race whoop I crashed into the tree repeatedly 🤣

@drdrhelmut Год назад

Haha, the stress testing was a great segment! Was it just me, or did the slow flying already have vibrations and wobbliness? Was that also Adobe Premiere?

@NickBurnsFPV Год назад

I did see the micro vibrations in certain segments. I do think its a file issue just like the faster flight recordings.

@FireN2k9 Год назад

After 10 crashes I was like: "pls stop, the poor drone, pls stooop" :D

@NickBurnsFPV Год назад

He didn’t mind, the props weren’t happy though 😆

@CopperStateAerialPhotography Год назад

Great video!! I'm a big old noob here, I have a Tinyhawk 2 and a Radiomaster TX 16s. I've been looking to up my game in fpv with a new drone like 3in, 4in etc..etc. but, I have no idea which receiver I need to order. Frsky RXSR, Frsky XM +, TBS Crossfire nano Rx???? HELP! 😂😂😂😂

@NickBurnsFPV Год назад

I suggest staying away from frsky, expresslrs is the go to for many as the hardware is less expensive, and the performance/feature set outstanding. The downside to expresslrs is the firmeware flashing. Many just don't like it. If you don't feel comfortable learning to firmware flash, unfortunately this eliminates the good rx protocols and we are back to frsky, flysky and dmsx

@BIRDDOGFPV Год назад

What is the correct method to bind my Dji v2 goggles to my 25 ? Yes it’s got vista and elrs thanks nice review buddy !!

@NickBurnsFPV Год назад

Are those the new slim dji googles? If so, they won’t…at this time until or if dji updates the software

@BIRDDOGFPV Год назад

@@NickBurnsFPV they are the same ones you used and I have a Foxeer Foxwhoop 25 ..

@NickBurnsFPV Год назад

@@BIRDDOGFPV If they look the same the binding would be the same. It should be covered in the manual for the goggles. Press the button on the vista after power up and press the red button on the goggles. The goggles will beep for a bit then stop.

@HelloDimineata Год назад

This is actually cool. Now let's see how DJI comes with their cinewhoop called Avata and if their material is as good as this little guy.

@AsgardStudios Год назад

Good heavens that was hard to watch! Lol

@CarbonGlassMan Год назад

Wow. 45 amps for a 2.5 inch? 1404 motors for a 2.5 inch? My only 2.5 inch is a TH Freestyle with 1103 motors and 5a ESCs. This one should last a long white.

@Ninja_man_son Год назад

CAN THAT FIT ON MY CINELOG 30?

@NickBurnsFPV Год назад

not with the props of the cinelog30. Otherwise it very likely will

@FrequentFlyerRC Год назад

I think if you lower the D gain it would fix that wobble at zero throttle Nick. Awesome review 👍🏾

@FPV_Cam Год назад

Wouldn't D term be quicker jitters? Looks more like I Term to me but I'm not sure

@FrequentFlyerRC Год назад

@@FPV_Cam When I tune if the quad wobbles on the descent lowering the D term usually fixes it. Wobble on ascending usually means too much P term so lowering that fixes that and I term I rarely use but I assumed it was for in-between and fixing the hover but I'm nowhere near an expert so you could be right and I'm just an idiot 😂🤣😂 (especially since last I remember new terms were added that I know nothing about 😜)

@NickBurnsFPV Год назад

Funny I showed it to foxeer and they didn’t see anything wrong 🤦‍♂️

@TouYubeTom Год назад

@@NickBurnsFPV that's sad.. did you try to explain it further?

@NickBurnsFPV Год назад

@@TouYubeTom I tried to with several messages and examples. I suspect they were focused on the slow flight only.

@SunriseWaterMedia Год назад

You mentioned the ESC is rated at 45 amps. Is that 45 total for all 4 added together? Or does each ESC get 45 amps allotted to it?

@NickBurnsFPV Год назад

When they rate amps it’s generally or always per esc so 45x4 total

@SunriseWaterMedia Год назад

@@NickBurnsFPV Thanks so much, Nick. 👊