Inkscape For Laser Cutting, Beginners Tutorial 

A little bit of additional information. www.3dpprofessor.com/2018/10/30/inkscape-for-laser-cutter-beginners-tutorial/

This is by far the best tutorial on RU-vid for using inkscape with a laser engraver. Almost all of them are just silent videos with annoying generic music added on top and no explanation.

You talked about inksccape and vectors, handles and paths etc but you didn't actually do any laser cutting. One can assume the people who click on this video already know how to use Inkscape, but have come here because they want to know how to use Inkscape to laser cut the image on the screen. Like all of these vector image programs, Inkscape is very complicated and very finickity, hence the reason for the need to know how to send the image on the screen to the laser cutter

best tutorial ive seen yet on this topic, I can tell you are definitely a teacher. 🙏

I've been using Inkscape for a little while so I'm familiar with some of what you illustrated. With this video you just pushed me up several levels beyond what I knew before. Thank you

This is such a good video, well explained. Really wholesome too!

Thank You for taking the time to create Your Videos!! I'm brand new to the laser and am slowly learning the How To's I "printed" my very first job today (just got the laser yesterday and finally found out how to do GCode (.nc file format) Been playing around with Inkscape for awhile now but definitely need more information!! Thanks again for Your Time!!!

thank you man, I wachted many tutorials but this one was definitely the best!

This was perfect education for the laser engraver project I am working on. Thank you!

thank you, very good tutorial I hope you have more on this subject, as I'm just getting my feet wet on laser cutting thanks mike

one of the few tutorial to incorporate inkscape with laser engrave/cutting 😁, I am using Inkscape with LaserGrbl on LM2 pro 10A, I am tiring to create/engrave a wasteboard grid onn MDF, what should be the stroke width (minimum) for the lines to be engraved. Also what would be efficient (ZIP-ZIP-ZIP) for the laser engraver: create individual horizontal/vertical lines and group them together, OR use path effect on a line CREATE GRID, and get away with over lapping burns when the horizontal crosses the vertical

Approaching the end of 2020, and this video is GOLD! Thank you!

Thank you for the great video! Super easy to follow along and understand!

Not sure this was such a good 'beginner' tutorial...

Exactly what I needed thanks!

Best tutorial yet! Thank you

When l have taken a brick wall image and generated a 'trace bitmap' it does a great job however the outline when exported to DXF is the outline of the pen rather than a single line per brick. Any way of having a single line per brick?

Hello sir I know this video is years old but I was hoping you could still answer my question I have inkscape and I'm having an issue with the machine cutting and engraving in the wrong direction do you know how to fix this?

Awesome!

Brushing up on my laser cutting/inkscape skills and this was a great tutorial! I already knew everything you talked about, but you definitely added more depth and understanding. Appreciate the awesome vid! :))

Thanks ! I sometimes use Inkscape,mainly to prepare paths as a base for CNC cutting or simple 3D models, and learned a lot from this/ Thanks !

Good general Inkscape info but I was hoping for a tutorial that showed how to use Inkscape to generate a file for a laser engraver.

How do I set up the setting screen on the right side? My Inkscape pops up the setting window I am working with. I want the window to be steady in the right side. I have View-Wide screen.

Hi I have a question please , when I wright a name on inkscape then I move it to EZ cad to engrave it I can't hatch it could you please help me to solve this problem

please do you know how I can set up my svg file vector in inkscape to cut inside parts first before the boundaries(outside line border )

Really, really good teacher! Thank you!

What an awesome tutorial! I stumbled upon it and now I'm going to sub so I don't lose it! Thanks for making a great video!

Can anyone help, I am looking to burn/engrave a picture onto the inside base of a bowl, can i set up the size of my engraving area on Inkscape to allow for that?

I have a huge problem I can't seem to figure out - hoping for some guidance! I have an image that I'm engraving onto a piece of slate and there are lines of dots that aren't included in the image appearing on the engraving. Is there something I could try to remove these unwanted dots/artifacts? Thanks in advance!

excellent.. .. thanks for sharing

Which version of inkscape are you using there, I've installed the latest and it's different to yours, I'm on Windows 8

Nice video! I got a question. I have the problem that my eleksmaker software eleks CAM cannot lpen the g ode file from inkscape what can i do?

No matter what I do my vector/svfg files will only engrave on the laser cutter at or local makerspace and not cut out... No one can help me in inkscape and the general consensus is to use a diff program? I feel like, especially for super simple svg files, it should be super easy to dictate what's being cut out or engraved? I dunno.. It's weird. It'll actually engrave the spots on it to be engraved but barley outline engraves the lines actually ment to be cut =/

How does one know what colors to use ???!! Nobody explains it! is there a list or manual ? Is there a standard? Can I map laser powersettings to colors ? This is something really nobody explains... Please please please elaborate on that topic! How to configure that in a template of somesort so one can develop a workflow...

What does raster mean? How do I export as DXF or SVG?

Nice vid!

I have the following issue while using the laser in my Ender 3-Pro from Creality: The height can be customized, and the printer responds to Z offset changes. (software, screen, or Gcode) The machine, I heard it switch on/off, although it does not engrave at all from laser speed 15 to 3,000 mm/min that I tried. I just see a mild sign of work when I put my eye close, but nothing noticeable. The laser won't light up by itself. I have to go to the screen of the printer and adjust the Fan Speed 100% for every print. Even though, the gcode file has M106 S255 in several sections..... and M107 at the end. CAN YOU HELP ME TO MAKE THE LASER WORK....? it had not been an easy process, I am almost frustrated. Thanks.

What software did you use for screen capture. Also, what did you use to show the mouse functions in the bottom left of the screen?

molto bravo , esiste la versione italiana di Inkscape?

Thank you for the video! It was a great intro into using Inkscape and just for laser cutting in general!

Hi first of all a really helpfull tutorial thanks for that. I got a question about 17:39 where you inking the smiley in red. I tryied to do so but it always colours the hole thing red an not just the lines? Is there an trick i have overlooked?

thanks you so much

What an awesome tutorial. I think you could teach rocket science to a tortoise given the chance. If you're not a highly paid world renowned lecturer or teacher of all the things and stuff then you certainly should be. Thanks very much

In what format should I export the vector file so that the laser cutter recognizes it?

So, how do I do a zip zip zip zip cut with a single line?

Thank you! This was really helpful!

Fantastic tutorial!

Amazing video! very helpful

Isnt inkscape free lol what price ?

You're the man!

nice ...

Strange that this way to long video was a high result in my laser engraving search. 20 minutes later and haven't learned anything :-)

Where did you get the smiley faces?

you call this a beginner guide. how do the hell do you setup the inkscape to eny laser printer.

Shapeth